AD534JD
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4704 ПКС
- Package
- CDIP-14
- Series
- Линейные - аналоговые умножители, делители
Это подробное сравнение AD534JD и AD534LD предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The AD534LD is a functionally compatible replacement candidate for the AD534JD, sharing the same analog multiplier/divider architecture, TO-100 package, and operating temperature range. The primary distinction is the specified nonlinearity grade, which requires validation against the target application's accuracy requirements before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD534JD | AD534LD | Why it matters |
|---|---|---|---|
| Function | Analog multiplier/divider | Analog multiplier/divider | Both parts must perform the same core arithmetic function to be considered substitutes. |
| Manufacturer | Analog Devices | Analog Devices | Same manufacturer ensures consistent design lineage and documentation. |
| Package / Mounting Type | 14-pin CERDIP, through-hole | 14-pin CERDIP, through-hole | Identical package and mounting allow direct board replacement without layout changes. |
| Operating Temperature Range | 0°C to +70°C | -55°C to +125°C | The wider military-grade temperature range of the LD affects suitability for harsh or extended-temperature environments. |
| Grade / Temperature Class | Commercial (J grade) | Military/Industrial (L grade) | Grade determines screening, reliability level, and acceptable application environments. |
| Total Error (Multiplier Mode) | ±1.0% max | ±1.0% max | Accuracy specification directly affects computational precision in analog signal processing. |
| Supply Voltage Range | ±8 V to ±18 V | ±8 V to ±18 V | Compatible supply range ensures the part can operate in the same circuit power environment. |
| Input Offset Voltage | ±1.0 mV max | ±1.0 mV max | Offset voltage influences DC accuracy and error budget in precision analog computation. |
| Bandwidth (Small Signal) | 1 MHz | 1 MHz | Bandwidth determines the maximum signal frequency the multiplier can process accurately. |
| Nonlinearity | ±0.5% max | ±0.5% max | Nonlinearity affects distortion and accuracy across the full input range. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD534JD | AD534LD |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Analog Devices Inc. |
| Part Status | Obsolete | Active |
| Function | Analog Multiplier/Divider | Analog Multiplier/Divider |
| Number of Bits / Stages | 4-Quadrant | 4-Quadrant |
The AD534JD and AD534LD are both analog multipliers from Analog Devices, but they differ in their specified operating temperature ranges and corresponding accuracy grades. The AD534JD is specified for the commercial temperature range of 0°C to +70°C, while the AD534LD is specified for the industrial temperature range of -25°C to +85°C. The AD534LD also carries tighter accuracy specifications over its wider temperature range.
Yes. Both the AD534JD and AD534LD are offered in the same 14-pin hermetic side-brazed ceramic dual in-line package (DIP) with identical pinout assignments. This allows them to be used interchangeably on the same PCB footprint, provided the application's temperature and accuracy requirements are satisfied.
Per the Analog Devices AD534 datasheet, the AD534JD (J grade) is specified with a maximum total error of ±1.0% of full scale at +25°C, while the AD534LD (L grade) is specified with a maximum total error of ±0.5% of full scale at +25°C. The L grade offers approximately twice the accuracy of the J grade.
Because both devices share the same package and pinout, the AD534JD can physically replace the AD534LD. However, the AD534JD has a narrower temperature range (0°C to +70°C) and looser accuracy (±1.0% vs. ±0.5%). If the application operates outside 0°C to +70°C or requires the tighter accuracy of the L grade, the substitution is not recommended without design validation.
Both the AD534JD and AD534LD operate from standard dual supplies of ±15 V nominal, with an allowable range of ±8 V to ±18 V per the Analog Devices datasheet. The quiescent supply current is typically 4 mA for both grades.
Yes. The AD534LD (L grade) has a tighter maximum input offset voltage specification than the AD534JD (J grade). According to the AD534 datasheet, the L grade offers improved offset performance, which contributes to its lower total error specification of ±0.5% compared to ±1.0% for the J grade.
The AD534LD should be selected. Its specified operating temperature range of -25°C to +85°C covers the industrial requirement, whereas the AD534JD is only specified for 0°C to +70°C. Using the AD534JD above +70°C would exceed its rated temperature range and is not supported by the manufacturer's specifications.
Both the AD534JD and AD534LD are housed in hermetic side-brazed ceramic DIP packages. These package types are typically not RoHS compliant due to the use of high-temperature solders and ceramic materials. Designers should verify the specific ordering code and compliance status with Analog Devices or an authorized distributor before finalizing a design.