AD7495BRZ vs AD7492AR-5

Это подробное сравнение AD7495BRZ и AD7492AR-5 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7495BRZ and AD7492AR-5 are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible functional architecture, making the AD7495BRZ a viable replacement candidate for the AD7492AR-5 in many designs. However, the two parts differ in sampling throughput, analog input configuration, and digital interface timing, so the replacement should be validated against the target application's speed, signal-conditioning, and bus-timing requirements before adoption.

Resolution and Architecture High match
Sampling Rate Validation required
Analog Input Configuration Validation required
Digital Interface Validation required

Parts at a glance

Part A

AD7495BRZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
2494 ПКС
Package
SOIC-8
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)
Part B

AD7492AR-5

Компания Analog Devices Inc.

Lifecycle
Active
Stock
8549 ПКС
Package
SOIC-24
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7495BRZ AD7492AR-5 Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so quantization accuracy is equivalent for substitutability.
Sampling Rate 1 MSPS 1.25 MSPS The AD7492AR-5 offers a higher maximum throughput, which may matter for faster signal acquisition.
Number of Input Channels 1 1 Both are single-channel devices, so channel count is not a differentiator.
Input Type Single-ended Single-ended Matching input configuration supports direct functional replacement in single-ended signal chains.
Supply Voltage 5 V 5 V Identical supply requirements simplify power-rail compatibility between the two parts.
Interface SPI / QSPI / MICROWIRE / DSP compatible serial Parallel The interface differs significantly (serial vs parallel), which affects board layout and host controller compatibility.
Package / Mounting 8-Lead SOIC (surface mount) 24-Lead SOIC (surface mount) Different package footprints prevent direct drop-in replacement on an existing PCB.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings mean both suit the same industrial operating environments.
Power Consumption Approx. 4.5 mW at 5 V, 1 MSPS Approx. 15 mW at 5 V, 1.25 MSPS Lower power in the AD7495BRZ benefits energy-sensitive designs, while the AD7492AR-5 trades power for speed.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7495BRZ AD7492AR-5
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 1M 1.25M
Data Interface SPI, DSP Parallel
Number of A/D Converters 1 1
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Number of Inputs 1 -
Input Type Single Ended -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture SAR -
Reference Type External -
Voltage - Supply, Analog 2.7V ~ 5.25V -
Voltage - Supply, Digital 2.7V ~ 5.25V -

Frequently asked questions

What are the key differences between the AD7495BRZ and AD7492AR-5?

The AD7495BRZ is a 12-bit successive-approximation ADC with a serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, supplied in an 8-lead SOIC package, and specified for operation from a single 2.7 V to 5.25 V supply. The AD7492AR-5 is a 12-bit SAR ADC with a parallel interface, supplied in a 24-lead SOIC package, and specified for operation from a single 5 V supply. The primary differences are the digital interface (serial vs. parallel), package/pin count, and supply voltage range.

Do the AD7495BRZ and AD7492AR-5 have the same resolution and conversion architecture?

Yes. Both devices are 12-bit successive-approximation (SAR) analog-to-digital converters, so they share the same resolution and conversion principle. The differences lie in interface, package, and supply specifications rather than in resolution or architecture.

Can the AD7495BRZ and AD7492AR-5 be used interchangeably in the same PCB design?

No, not without redesign. The AD7495BRZ uses an 8-lead SOIC package with a serial interface, while the AD7492AR-5 uses a 24-lead SOIC package with a parallel interface. The pin counts, pin functions, package footprints, and host interface requirements differ, so a direct drop-in replacement is not possible.

What supply voltage does each device require?

The AD7495BRZ is specified for a single supply of 2.7 V to 5.25 V. The AD7492AR-5 is specified for a single 5 V supply (the "-5" suffix denotes the 5 V version). Designs must ensure the supply rail matches the respective device specification.

Which device is better suited for systems with limited board space and few digital I/O lines?

The AD7495BRZ is generally better suited in these cases because it is offered in a compact 8-lead SOIC package and uses a serial interface, which requires fewer host I/O pins than the parallel interface of the AD7492AR-5 in its 24-lead SOIC package.

Which device is better suited for high-throughput parallel data capture?

The AD7492AR-5, with its parallel interface, is generally better suited where the host can accept a full parallel data word per conversion, avoiding the serial shift overhead associated with the AD7495BRZ. The choice should be validated against the timing requirements in the respective manufacturer datasheets.

Are the AD7495BRZ and AD7492AR-5 specified over the same temperature range?

Both devices are offered in commercial temperature grade versions (0°C to +70°C) as indicated by their respective ordering codes. Designers should confirm the exact operating temperature range for the specific orderable part number against the manufacturer datasheet before use in extended-temperature applications.