AD7677ASTZ vs AD7679ASTZRL

Это подробное сравнение AD7677ASTZ и AD7679ASTZRL предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7677ASTZ and AD7679ASTZRL are both 18-bit successive-approximation ADCs from Analog Devices in the same LQFP-48 package, sharing a common architecture and pinout family. The AD7679ASTZRL offers a higher maximum sampling rate (570 kSPS versus 1 MSPS-class operation of the AD7677) and a wider input span option, so it can serve as a functional upgrade in many designs, but the differing throughput, input range configuration, and reference/supply requirements must be validated against the target application before substitution.

Resolution and Architecture High match
Sampling Rate Validation required
Input Voltage Range Validation required
Package Type High match

Parts at a glance

Part A

AD7677ASTZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
1648 ПКС
Package
LQFP-48
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)
Part B

AD7679ASTZRL

Компания Analog Devices Inc.

Lifecycle
Active
Stock
6051 ПКС
Package
LQFP-48
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7677ASTZ AD7679ASTZRL Why it matters
Resolution (bits) 16 18 Higher resolution provides finer quantization and better dynamic range; an 18-bit part cannot be directly substituted where 16-bit data format is expected without adjustment.
Sampling Rate (max) 1 MSPS 570 kSPS Maximum throughput determines whether the ADC can keep up with the system's signal bandwidth and timing requirements.
Input Type Differential Differential Differential inputs improve common-mode rejection and noise immunity; matching input topology is essential for direct board-level substitution.
Interface Parallel / Serial (SPI) Parallel / Serial (SPI) The digital interface must match the host controller's bus to allow drop-in replacement without firmware or layout changes.
Supply Voltage (analog) 5 V 5 V Analog supply must be compatible with the existing power rail and reference scheme for correct operation.
Package 48-Lead LQFP 48-Lead LQFP Identical package and pinout enable physical drop-in replacement on an existing PCB footprint.
INL (max) ±2.5 LSB ±2.5 LSB Integral nonlinearity affects absolute accuracy; comparable INL means similar measurement fidelity in the target application.
SNR (typ) 92 dB 101 dB Signal-to-noise ratio defines usable dynamic range; the 18-bit device offers higher SNR, which may exceed or differ from system requirements.
Power Consumption (typ) 90 mW 75 mW Power budget and thermal considerations differ between the two parts, affecting supply design and enclosure thermal limits.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7677ASTZ AD7679ASTZRL
Supplier - Analog Devices Inc.
Series PulSAR® PulSAR®
Part Status Active Obsolete
Number of Bits 16 18
Sampling Rate(Per Second) 1M 570k
Number of Inputs 1 1
Input Type Differential Differential
Data Interface SPI, Parallel, DSP SPI, Parallel, DSP
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the AD7677ASTZ and AD7679ASTZRL?

The AD7677ASTZ is a 16-bit, 1 MSPS differential SAR ADC, while the AD7679ASTZRL is an 18-bit, 570 kSPS differential SAR ADC. The AD7679 offers higher resolution but a lower maximum throughput rate than the AD7677. Both are pin-compatible members of Analog Devices' PulSAR family in 48-lead LQFP packages.

Are the AD7677ASTZ and AD7679ASTZRL pin-compatible?

Yes. Both devices are offered in the same 48-lead LQFP (ST-48) package and share the same pinout, which allows a common PCB footprint. However, firmware and timing must be revalidated because the two parts differ in resolution and maximum sample rate.

What is the maximum sampling rate of each device?

The AD7677ASTZ supports a maximum throughput of 1 MSPS. The AD7679ASTZRL supports a maximum throughput of 570 kSPS. The lower rate of the AD7679 is a consequence of its higher 18-bit resolution.

What resolution and SNR performance do these ADCs provide?

The AD7677ASTZ provides 16-bit resolution with a typical SNR of 92 dB. The AD7679ASTZRL provides 18-bit resolution with a typical SNR of 98 dB. The higher SNR of the AD7679 reflects its greater resolution.

Do both parts support the same analog input configuration?

Yes. Both the AD7677ASTZ and AD7679ASTZRL feature fully differential analog inputs and support the same analog input voltage range options, including ±10 V, ±5 V, and 0 V to 5 V ranges, configured through the same input range selection scheme.

What digital interface do the AD7677ASTZ and AD7679ASTZRL use?

Both devices provide a parallel digital interface with a flexible host connection, supporting 8-bit and 16-bit bus widths and a separate supply for the digital interface (VIO). This allows direct connection to a variety of processors and DSPs.

What are the supply voltage requirements for these ADCs?

Both the AD7677ASTZ and AD7679ASTZRL operate from a 5 V analog supply (AVDD) and a separate digital interface supply (VIO) that can range from 2.7 V to 5.25 V, allowing compatibility with lower-voltage logic.

Can the AD7679ASTZRL be used as a drop-in upgrade for the AD7677ASTZ?

Because the two parts are pin-compatible, the AD7679ASTZRL can be placed on the same footprint, but it is not a direct drop-in replacement without validation. The system must accommodate the lower 570 kSPS maximum throughput and confirm that timing, firmware, and signal conditioning meet the 18-bit performance requirements.