AD8014ARZ
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 1208 ПКС
- Package
- SOIC-8
- Series
- Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Это подробное сравнение AD8014ARZ и AD8018AR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The AD8014ARZ and AD8018AR are both high-speed current-feedback operational amplifiers from Analog Devices in an 8-lead SOIC package, sharing a similar supply voltage range and bandwidth class. However, they differ in output drive capability and quiescent current, so the AD8018AR should be validated against the AD8014ARZ for load-driving and power-budget requirements before substitution.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8014ARZ | AD8018AR | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 1 | 2 | Channel count determines how many independent signal paths can be processed; a dual amplifier cannot directly replace a single in a single-channel layout without unused channels. |
| -3 dB Bandwidth | 400 MHz | 100 MHz | Bandwidth sets the maximum signal frequency the amplifier can handle with acceptable gain; a large difference affects high-speed signal fidelity. |
| Slew Rate | 4000 V/µs | 350 V/µs | Slew rate limits how fast the output can respond to large signal swings; lower slew rate can cause distortion on fast transients. |
| Supply Voltage Range | 4.5 V to 12 V (±2.25 V to ±6 V) | 3 V to 10 V (±1.5 V to ±5 V) | The allowable supply range must cover the system rail voltages; mismatched ranges can prevent operation or risk damage. |
| Supply Current per Amplifier | 1.15 mA | 9 mA | Quiescent current affects power budget and thermal design; a much higher current draw may exceed the original power envelope. |
| Input Voltage Noise Density | 2.5 nV/√Hz | 5 nV/√Hz | Lower noise density improves signal-to-noise ratio in low-level signal applications; higher noise can degrade sensitivity. |
| Output Current (Typical) | 50 mA | 150 mA | Output drive capability determines the load the amplifier can drive; insufficient drive can cause clipping into low-impedance loads. |
| Package Type | 8-Lead SOIC | 8-Lead SOIC | Package footprint and pinout must match for board-level interchangeability; identical package type supports drop-in replacement. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range must cover the application environment; matching ranges ensure equivalent environmental robustness. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8014ARZ | AD8018AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | - | Driver |
| Protocol | - | xDSL |
| Number of Drivers/Receivers | - | 2/0 |
| Voltage - Supply | - | 3.3V ~ 8V |
| Mounting Type | Surface Mount | Surface Mount |
| Amplifier Type | Current Feedback | - |
| Number of Circuits | 1 | - |
| Slew Rate | 4600V/µs | - |
| -3 dB Bandwidth | 480 MHz | - |
| Current - Input Bias | 5 µA | - |
| Voltage - Input Offset | 2 mV | - |
| Supply Current | 1.15mA | - |
| Current - Output / Channel | 50 mA | - |
| Voltage - Supply Span(Min) | 4.5 V | - |
| Voltage - Supply Span(Max) | 12 V | - |
| Operating Temperature | -40°C ~ 85°C | - |
The AD8014ARZ is a single, low-power, high-speed current-feedback operational amplifier specified for +5 V or ±5 V operation, while the AD8018AR is a dual, high-output-current line driver optimized for xDSL and similar applications, typically operating from a single +5 V supply. The AD8014ARZ comes in an 8-lead SOIC package, and the AD8018AR is offered in an 8-lead SOIC package as well, but the two devices differ in channel count, intended application, and output drive characteristics.
No. The AD8014ARZ is a single amplifier and the AD8018AR is a dual amplifier, so the pin functions and channel count differ. A direct drop-in substitution is not possible without verifying pinout, supply configuration, and application requirements against the respective manufacturer datasheets.
The AD8014ARZ is specified for operation on +5 V single supply or ±5 V dual supplies. The AD8018AR is specified for a single +5 V supply. Designers should confirm exact supply ranges and absolute maximum ratings in the official Analog Devices datasheets before use.
The AD8018AR is specifically designed as a dual high-output-current line driver for xDSL and similar communications applications, making it the more appropriate choice for line-driving duties. The AD8014ARZ is a general-purpose single high-speed current-feedback amplifier and is not positioned as a dedicated xDSL line driver.
Both devices are available in 8-lead SOIC packages, but they do not share the same pinout because the AD8014ARZ is a single amplifier and the AD8018AR is a dual amplifier. PCB layouts must be designed according to each device's specific datasheet pin configuration.
The AD8014ARZ contains one operational amplifier (single), while the AD8018AR contains two operational amplifiers (dual). This difference affects board space, power consumption, and circuit topology in multi-channel designs.
The AD8014ARZ is a current-feedback operational amplifier. The AD8018AR is a dual high-output-current amplifier intended for line-driving applications; designers should consult the official Analog Devices datasheet to confirm its internal amplifier topology before assuming current-feedback behavior.