AD8205YRZ vs AD8200YR

Это подробное сравнение AD8205YRZ и AD8200YR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8205YRZ and AD8200YR are both high-voltage, bidirectional current-sense amplifiers from Analog Devices in the same SOIC-8 package, sharing a common functional architecture and similar supply and temperature ranges. However, they differ in gain configuration and input common-mode voltage range, so the AD8200YR can serve as a functional substitute for the AD8205YRZ only after validating gain accuracy and common-mode headroom for the target application.

Package Type High match
Supply Voltage Range High match
Gain Configuration Validation required
Input Common-Mode Voltage Range Validation required

Parts at a glance

Part A

AD8205YRZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
5808 ПКС
Package
SOP-8
Series
Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Part B

AD8200YR

Компания Analog Devices Inc.

Lifecycle
Active
Stock
9845 ПКС
Package
SOIC-8
Series
Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8205YRZ AD8200YR Why it matters
Amplifier Type Current Sense Amplifier Difference Amplifier Defines the primary function; a current sense amplifier is optimized for shunt-based current measurement, while a difference amplifier is a general-purpose differential signal conditioner.
Number of Channels 1 1 Both are single-channel devices, so channel count does not differentiate them for substitutability.
Input Offset Voltage (max) 2 mV 1 mV Lower offset improves DC accuracy in low-level differential measurements; the AD8200 offers tighter offset, which can matter in precision sensing.
Gain 20 V/V (fixed) 10 V/V (fixed) Fixed gain determines output scaling relative to input; a 2x gain difference changes the signal chain transfer function and may require recalibration.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Both operate from a single 5 V supply, so power rail compatibility is equivalent.
Common-Mode Input Range -2 V to +65 V -2 V to +65 V Wide common-mode range enables high-side sensing; identical ranges mean similar robustness to large common-mode voltages.
Bandwidth 100 kHz 100 kHz Bandwidth sets the maximum signal frequency the amplifier can accurately process; matching bandwidth supports similar dynamic response.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Identical temperature ratings ensure equivalent environmental robustness for industrial and automotive applications.
Package / Mounting 8-SOIC (Surface Mount) 8-SOIC (Surface Mount) Same package and mounting style allow direct PCB footprint compatibility without layout changes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8205YRZ AD8200YR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type Differential Differential
Number of Circuits 1 1
Slew Rate 0.5V/µs 0.22V/µs
Mounting Type Surface Mount Surface Mount
-3 dB Bandwidth 50 kHz -
Voltage - Input Offset 2 mV -
Supply Current 2mA -
Voltage - Supply Span(Min) 4.5 V -
Voltage - Supply Span(Max) 5.5 V -
Operating Temperature -40°C ~ 125°C -

Frequently asked questions

What are the key differences between the AD8205YRZ and the AD8200YR?

The AD8205YRZ is a single-supply, bidirectional current-sense amplifier with a gain of 50 V/V, while the AD8200YR is a high-voltage, bidirectional current-sense amplifier with a gain of 20 V/V. The AD8205YRZ is specified for operation from −40°C to +125°C and is supplied in an 8-lead SOIC package, whereas the AD8200YR is specified over the automotive temperature range and is supplied in an 8-lead SOIC package as well. The primary differences are gain (50 vs. 20) and the associated input common-mode and output voltage ranges.

Are the AD8205YRZ and AD8200YR pin-compatible?

Both devices are offered in 8-lead SOIC packages, but pin compatibility must be confirmed against the respective manufacturer datasheets. The AD8205YRZ and AD8200YR have different gain configurations, so the external component values and output scaling differ even if the package footprint is similar. Designers should verify pin functions and land patterns before considering a substitution.

What is the gain of each device?

The AD8205YRZ has a fixed gain of 50 V/V. The AD8200YR has a fixed gain of 20 V/V. This difference directly affects the output voltage for a given sense voltage and must be accounted for in the system signal chain.

What common-mode input voltage range do these amplifiers support?

Both the AD8205YRZ and AD8200YR are high-voltage current-sense amplifiers designed for operation with common-mode input voltages well above the supply rail. The exact specified common-mode range depends on the supply voltage and is defined in the manufacturer datasheets. Users should consult the datasheet for the guaranteed common-mode voltage range under their operating conditions.

Can the AD8205YRZ and AD8200YR be used in automotive applications?

The AD8200YR is specified for automotive temperature ranges and is commonly used in automotive current-sensing applications. The AD8205YRZ is specified for operation from −40°C to +125°C, which covers many automotive and industrial requirements. Qualification status and AEC-Q100 compliance should be verified from the manufacturer's official documentation for the specific orderable part number.

What supply voltage range do these devices require?

Both the AD8205YRZ and AD8200YR are single-supply current-sense amplifiers. The exact minimum and maximum supply voltages are specified in the respective manufacturer datasheets. Designers should confirm the supply range for the chosen grade and ensure the supply is within the specified limits for reliable operation.

Which device should be selected for a given sense voltage and output range?

Selection depends on the required output voltage for the expected sense voltage. With a gain of 50 V/V, the AD8205YRZ produces a larger output for a given sense voltage than the AD8200YR at 20 V/V. The designer should calculate the output swing against the available output range and supply voltage, then verify against the datasheet specifications for each device.