AD8422ARZ vs AD8428BRZ-RL

Это подробное сравнение AD8422ARZ и AD8428BRZ-RL предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8422ARZ and AD8428BRZ-RL are both precision instrumentation amplifiers from Analog Devices in the same SOIC-8 package, but they are not direct drop-in substitutes. The AD8428BRZ-RL offers substantially higher gain (fixed G = 2000) and far greater bandwidth, while the AD8422ARZ is a programmable-gain (G = 1 to 1000) amplifier with lower supply current. Designers must validate gain configuration, bandwidth, and noise requirements before substituting one for the other.

Gain Configuration Validation required
Bandwidth Validation required
Package Type High match
Supply Current Validation required

Parts at a glance

Part A

AD8422ARZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
3872 ПКС
Package
SOIC-8
Series
Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Part B

AD8428BRZ-RL

Компания Analog Devices Inc.

Lifecycle
Active
Stock
2362 ПКС
Package
SOIC-8
Series
Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8422ARZ AD8428BRZ-RL Why it matters
Number of Amplifiers 1 1 Both are single-channel instrumentation amplifiers, so channel count is equivalent for substitutability.
Gain Range 1 to 1000 (set by external resistor) Fixed gain of 2000 The AD8422 offers user-programmable gain via an external resistor, while the AD8428 has a fixed gain of 2000; this fundamentally changes circuit design and application fit.
Input Offset Voltage (max) 70 µV 15 µV Lower offset voltage improves DC accuracy; the AD8428 provides tighter offset performance for precision measurement.
Input Voltage Noise (1 kHz, typ) 8 nV/√Hz 1.5 nV/√Hz Lower input noise is critical for resolving small signals; the AD8428 is significantly quieter, benefiting low-level sensor applications.
Bandwidth (at rated gain) 2.2 MHz (G = 1) 3.5 MHz (G = 2000) Bandwidth determines the maximum signal frequency the amplifier can handle; the AD8428 maintains wide bandwidth even at high fixed gain.
Supply Voltage Range ±2.3 V to ±18 V (4.6 V to 36 V) ±4 V to ±18 V (8 V to 36 V) The AD8422 supports lower supply voltages, enabling use in lower-power or single-supply systems where the AD8428 cannot operate.
Supply Current (typ) 300 µA 6.5 mA Quiescent current affects power budget; the AD8422 is far more power-efficient, while the AD8428 consumes more for its higher performance.
CMRR (min, G = 1000) 110 dB 130 dB Higher common-mode rejection improves accuracy in noisy environments; the AD8428 offers superior CMRR for demanding precision applications.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both share the same industrial temperature range, so environmental compatibility is equivalent.
Package 8-Lead SOIC 8-Lead SOIC Identical package and pinout simplify board-level substitution, though electrical differences still require design review.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8422ARZ AD8428BRZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Slew Rate 0.8V/µs 50V/µs
-3 dB Bandwidth 2.2 MHz 3.5 MHz
Current - Input Bias 500 pA 200 nA
Voltage - Input Offset 60 µV 25 µV
Supply Current 300µA 6.5mA
Current - Output / Channel 20 mA 30 mA
Voltage - Supply Span(Min) 4.6 V 8 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Output Type Rail-to-Rail -

Frequently asked questions

What are the primary functional differences between the AD8422ARZ and AD8428BRZ-RL?

The AD8422ARZ is a high precision, low power, low noise instrumentation amplifier optimized for wide dynamic range signal conditioning. The AD8428BRZ-RL is a low noise, high speed instrumentation amplifier with a fixed gain of 2000, designed for applications requiring high gain and fast settling. The AD8422 offers pin-selectable gains from 1 to 1000, while the AD8428 provides a fixed gain of 2000.

Are the AD8422ARZ and AD8428BRZ-RL pin-compatible?

No. The AD8422ARZ is supplied in an 8-lead SOIC package, while the AD8428BRZ-RL is supplied in an 8-lead SOIC package with a different pin configuration. The AD8428 includes an internal gain-setting network and additional filter pins, so the two devices are not pin-compatible and cannot be interchanged without PCB redesign.

How do the gain configurations of the AD8422ARZ and AD8428BRZ-RL differ?

The AD8422ARZ uses an external resistor to set gain from 1 to 1000, providing design flexibility. The AD8428BRZ-RL has a fixed gain of 2000 set internally, which eliminates external gain resistors and improves gain accuracy and drift performance but removes user adjustability.

Which device offers lower input voltage noise?

The AD8428BRZ-RL specifies an input voltage noise density of 1.5 nV/√Hz at 1 kHz, while the AD8422ARZ specifies 8 nV/√Hz at 1 kHz. The AD8428 therefore provides lower input-referred noise, which is advantageous for low-level signal amplification.

How do the bandwidth specifications compare between the AD8422ARZ and AD8428BRZ-RL?

The AD8422ARZ provides a bandwidth of 2.2 MHz at gain of 1 and approximately 2.2 kHz at gain of 1000. The AD8428BRZ-RL provides a bandwidth of 3.5 MHz at its fixed gain of 2000. The AD8428 therefore offers significantly higher bandwidth at high gain.

What are the supply voltage and power consumption differences?

The AD8422ARZ operates from a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V, with a typical supply current of 300 µA. The AD8428BRZ-RL operates from dual supplies of ±4 V to ±18 V and typically draws 6.5 mA. The AD8422 is therefore better suited for low-power applications.

Which device is more suitable for high-gain, low-noise precision applications?

The AD8428BRZ-RL is optimized for high-gain, low-noise applications due to its fixed gain of 2000, 1.5 nV/√Hz input noise, and 3.5 MHz bandwidth. The AD8422ARZ is better suited for applications requiring flexible gain settings, lower power consumption, and wider supply voltage range.