AD8429ARZ
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 7143 ПКС
- Package
- SOIC-8
- Series
- Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Это подробное сравнение AD8429ARZ и AD8422ARZ-RL предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The AD8429ARZ and AD8422ARZ-RL are both precision instrumentation amplifiers in the same SOIC-8 package and pinout, making them functionally interchangeable in many designs. However, the AD8429ARZ offers substantially lower voltage noise and higher bandwidth, while the AD8422ARZ-RL provides lower power consumption and wider supply range flexibility. Designers should validate gain-setting resistor values, noise budget, and supply headroom before substituting one for the other in noise-critical or power-sensitive applications.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8429ARZ | AD8422ARZ-RL | Why it matters |
|---|---|---|---|
| Number of Channels | 1 | 1 | Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent. |
| Gain Bandwidth Product (GBW) | 15 MHz | 2.2 MHz | Higher GBW allows the AD8429 to handle wider-bandwidth signals at high gain, affecting dynamic performance. |
| Input Voltage Noise (1 kHz) | 1 nV/√Hz | 8 nV/√Hz | Lower input noise improves signal-to-noise ratio for low-level sensor signals; the AD8429 is significantly quieter. |
| Input Offset Voltage (max) | 50 µV | 70 µV | Lower offset reduces DC error at the output, important for precision measurement applications. |
| Supply Voltage Range | ±4 V to ±18 V | ±2.3 V to ±18 V | The AD8422 supports lower supply voltages, enabling use in low-voltage or battery-powered systems where the AD8429 cannot operate. |
| Quiescent Supply Current | 6.5 mA | 0.3 mA | The AD8422 draws far less current, making it preferable for power-sensitive designs. |
| CMRR (G=100, DC to 60 Hz) | 126 dB | 120 dB | Higher common-mode rejection suppresses interference; the AD8429 offers slightly better rejection. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | The AD8429 supports a wider temperature range, suitable for harsher environments. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Identical package and pinout allow drop-in board compatibility between the two parts. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8429ARZ | AD8422ARZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Output Type | - | Rail-to-Rail |
| Slew Rate | 22V/µs | 0.8V/µs |
| -3 dB Bandwidth | 15 MHz | 2.2 MHz |
| Current - Input Bias | 300 nA | 500 pA |
| Voltage - Input Offset | 150 µV | 60 µV |
| Supply Current | 6.7mA | 300µA |
| Current - Output / Channel | 35 mA | 20 mA |
| Voltage - Supply Span(Min) | 8 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8429ARZ is a low-noise instrumentation amplifier optimized for high gain and low noise (1 nV/√Hz) with a gain range of 1 to 10,000, while the AD8422ARZ-RL is a high-precision, low-power instrumentation amplifier with lower power consumption and a gain range of 1 to 1,000. The AD8429ARZ is supplied in an 8-lead SOIC package, and the AD8422ARZ-RL is supplied in an 8-lead SOIC package in tape and reel format.
Both devices are offered in 8-lead SOIC packages with the same pinout for the instrumentation amplifier function, but designers must verify the gain-setting resistor connections and reference pin behavior against the respective datasheets before considering a direct replacement.
The AD8429ARZ specifies an input voltage noise of 1 nV/√Hz at 1 kHz, which is lower than the AD8422ARZ-RL, making the AD8429ARZ preferable for low-noise signal acquisition applications.
The AD8422ARZ-RL is designed for lower power operation with a typical supply current of approximately 300 µA, whereas the AD8429ARZ draws a higher supply current, making the AD8422ARZ-RL more suitable for battery-powered or power-sensitive designs.
The AD8429ARZ supports gains from 1 to 10,000 using a single external resistor, while the AD8422ARZ-RL supports gains from 1 to 1,000. Designs requiring gains above 1,000 should use the AD8429ARZ.
The AD8422ARZ-RL offers lower offset voltage and offset voltage drift, making it better suited for high-precision DC measurements, while the AD8429ARZ is optimized for low-noise AC signal amplification.
Both the AD8429ARZ and AD8422ARZ-RL operate from dual supplies of ±4 V to ±18 V (or single supply of 8 V to 36 V), allowing use in a wide range of industrial and instrumentation systems.
The AD8429ARZ is supplied in an 8-lead SOIC package in tube form, while the AD8422ARZ-RL is supplied in an 8-lead SOIC package in tape and reel format for automated assembly.