AD8532ARZ-REEL7
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 7156 ПКС
- Package
- SOIC-8
- Series
- Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Это подробное сравнение AD8532ARZ-REEL7 и AD8532AR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The AD8532ARZ-REEL7 and AD8532AR are functionally equivalent dual operational amplifiers sharing identical core electrical specifications, differing only in packaging format and lead finish. The AD8532ARZ-REEL7 is supplied in tape-and-reel packaging with a RoHS-compliant lead-free finish, while the AD8532AR is provided in tube packaging with a standard tin-lead finish. Both parts are drop-in compatible for board-level replacement when the packaging format and lead-finish requirements are acceptable for the target assembly process.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8532ARZ-REEL7 | AD8532AR | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 2 | Both are dual op-amps, so channel count matches for direct substitution. |
| Supply Voltage Range | 2.7 V to 6 V | 2.7 V to 6 V | Identical operating supply range ensures the part works in the same circuit rails. |
| Gain Bandwidth Product | 3 MHz | 3 MHz | Same bandwidth means AC performance and stability are preserved. |
| Input Offset Voltage (max) | 25 mV | 25 mV | Matching offset limits keep DC accuracy consistent between the two parts. |
| Output Current per Channel | 250 mA | 250 mA | Equal drive capability supports the same load conditions. |
| Slew Rate | 5 V/µs | 5 V/µs | Identical slew rate preserves large-signal transient response. |
| Input Bias Current | 50 pA | 50 pA | Same ultra-low bias current suits high-impedance sensor interfaces equally. |
| Package / Mounting | 8-SOIC, surface mount, tape and reel | 8-SOIC, surface mount | Same package footprint allows drop-in board replacement; only packaging format differs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings ensure equivalent environmental robustness. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8532ARZ-REEL7 | AD8532AR |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 2 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 5V/µs | 5V/µs |
| Gain Bandwidth Product | 3 MHz | 3 MHz |
| Current - Input Bias | 5 pA | 5 pA |
| Voltage - Input Offset | 25 mV | 25 mV |
| Supply Current | 750µA (x2 Channels) | 750µA (x2 Channels) |
| Current - Output / Channel | 250 mA | 250 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 6 V | 6 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Both are dual, low-cost, rail-to-rail input/output operational amplifiers from Analog Devices in an 8-lead SOIC package. The AD8532ARZ-REEL7 is the RoHS-compliant (Z) version supplied on a 7-inch tape-and-reel (REEL7) for automated assembly, while the AD8532AR is the non-RoHS tube/rail version. The electrical specifications are identical; the differences are packaging format and RoHS compliance.
Yes. Both parts share the same datasheet specifications: dual op-amp, 3 MHz gain-bandwidth product, 5 V/µs slew rate, rail-to-rail input and output, 2.7 V to 6 V single-supply operation, and an 8-lead SOIC (R-8) package with identical pinout. They differ only in RoHS status and shipping format.
The "Z" suffix denotes RoHS compliance (lead-free, halogen-free per Analog Devices' Z designator). The "REEL7" suffix denotes a 7-inch tape-and-reel packaging format, typically 750 or 1,000 units per reel depending on the product. The AD8532AR lacks both suffixes and is supplied in non-RoHS tube/rail packaging.
Electrically and mechanically yes, but not for RoHS compliance. The AD8532AR is non-RoHS and would violate RoHS-restricted designs. For RoHS-compliant assemblies, use AD8532ARZ-REEL7 or another Z-suffixed variant. Verify solderability and moisture sensitivity level against the specific datasheet before substitution.
Per the Analog Devices AD8531/AD8532/AD8534 datasheet: dual operational amplifier, 2.7 V to 6 V single supply (or ±1.35 V to ±3 V dual supply), 3 MHz gain-bandwidth product, 5 V/µs slew rate, rail-to-rail input and output, low input bias current (typically 1 pA), and 8-lead SOIC package. Both variants share these specifications.
Both use the 8-lead SOIC (R-8) package. The pinout is identical: pin 1 = OUT A, pin 2 = −IN A, pin 3 = +IN A, pin 4 = V−, pin 5 = +IN B, pin 6 = −IN B, pin 7 = OUT B, pin 8 = V+. Package dimensions and PCB land patterns are the same for both variants.
AD8532ARZ-REEL7 is preferred for RoHS-compliant products and for high-volume automated SMT assembly, since the 7-inch tape-and-reel format supports pick-and-place equipment. AD8532AR is typically chosen for legacy non-RoHS designs or prototyping where tube packaging is acceptable.
Both part numbers appear in Analog Devices' product documentation as orderable variants of the AD8532. Availability and lifecycle status should be confirmed against the current Analog Devices product page or authorized distributor (DigiKey, Mouser, etc.) listing before design commitment, as lifecycle status can change.