Part A
AD8541ARTZ-REEL7
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6183 ПКС
- Package
- SOT-23-5
- Series
- Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Replacement verdict
Compatible functional replacement candidate
The AD8541ARTZ-REEL7 and AD8541ARTZ-R2 are functionally equivalent single-channel operational amplifiers from the same manufacturer, sharing identical die, package, and electrical specifications. The only meaningful distinction is packaging format and shipment quantity, making them interchangeable for design-in purposes with no electrical or footprint impact.
Amplifier Type and Channel Count
High match
Package and Pinout
High match
Supply Voltage and Electrical Ratings
High match
Packaging Format and Ordering Quantity
Validation required
Parts at a glance
Part B
AD8541ARTZ-R2
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 9994 ПКС
- Package
- SOT-753
- Series
- Линейные - Усилетели - Приборы, ОП Усилетели, Буферные Усилетели
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8541ARTZ-REEL7 | AD8541ARTZ-R2 | Why it matters |
|---|---|---|---|
| Manufacturer | Analog Devices Inc. | Analog Devices Inc. | Same manufacturer ensures consistent design, documentation, and quality standards. |
| Amplifier Type | General Purpose CMOS | General Purpose CMOS | Defines the core function and suitable application class of the op-amp. |
| Number of Circuits | 1 | 1 | Single-channel configuration must match the circuit design requirement. |
| Package / Case | SOT-23-5 | SOT-23-5 | Footprint and pinout compatibility are essential for drop-in substitution on a PCB. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Must cover the system rail voltage for the amplifier to operate correctly. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Determines the maximum signal frequency the amplifier can handle with adequate gain. |
| Input Offset Voltage (Max) | 6 mV | 6 mV | Affects DC accuracy; matching offset ensures equivalent precision in the application. |
| Input Bias Current | 1 pA (typ) | 1 pA (typ) | Low bias current is critical for high-impedance sensor and precision circuits. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Must satisfy the environmental conditions of the target application. |
| Packaging / Reel Size | 7-inch reel (REEL7) | 13-inch reel (R2) | Reel size affects pick-and-place feeder setup and minimum order quantity for production. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD8541ARTZ-REEL7 | AD8541ARTZ-R2 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Discontinued at Digi-Key |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 1 | 1 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.92V/µs |
| Gain Bandwidth Product | 1 MHz | 1 MHz |
| Current - Input Bias | 4 pA | 4 pA |
| Voltage - Input Offset | 1 mV | 1 mV |
| Supply Current | 45µA | 45µA |
| Current - Output / Channel | 30 mA | 30 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
Frequently asked questions
What is the difference between AD8541ARTZ-REEL7 and AD8541ARTZ-R2?
Both parts are the same AD8541 single operational amplifier in a SOT-23-5 (RT) package. The difference is the packaging format: AD8541ARTZ-REEL7 is supplied on a 7-inch tape-and-reel (typically 3,000 units per reel), while AD8541ARTZ-R2 is supplied on a smaller tape-and-reel (typically 250 units per reel). The electrical and package specifications are identical.
Are AD8541ARTZ-REEL7 and AD8541ARTZ-R2 electrically interchangeable?
Yes. Both order codes refer to the same AD8541 die in the same SOT-23-5 package, so the electrical parameters (supply voltage range, quiescent current, bandwidth, offset voltage, etc.) are identical. The only difference is reel quantity and packaging format.
What is the supply voltage range of the AD8541?
The AD8541 operates from a single supply of 2.7 V to 5.5 V (or dual supplies within that total range), making it suitable for low-voltage battery-powered and portable applications.
What are the key AC specifications of the AD8541?
The AD8541 has a unity-gain bandwidth of 1 MHz and a slew rate of 0.92 V/µs, with a typical quiescent supply current of 45 µA per amplifier. These characteristics suit low-power signal conditioning and sensor interface designs.
What package does the AD8541ARTZ use, and is it RoHS compliant?
The AD8541ARTZ uses a 5-lead SOT-23 (RT) surface-mount package. The "Z" suffix in the order code denotes RoHS-compliant, lead-free construction per Analog Devices' ordering nomenclature.
Which reel size should I choose between REEL7 and R2?
Choose AD8541ARTZ-REEL7 for production volumes requiring a 7-inch reel (typically 3,000 units), and AD8541ARTZ-R2 for prototyping, sampling, or low-volume builds where a smaller reel quantity (typically 250 units) is sufficient. Confirm exact reel quantities on the manufacturer datasheet or distributor listing before ordering.
Can AD8541ARTZ-REEL7 and AD8541ARTZ-R2 be used interchangeably on the same PCB?
Yes. Because both are the same device in the same SOT-23-5 package with identical pinout and footprint, either reel option can be placed on the same PCB land pattern. Selection depends only on the required order quantity and packaging format.