AD9788BSVZ
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5494 ПКС
- Package
- TQFP-100
- Series
- Сбор данных - цифровые в аналоговые преобразователи (DAC)
Это подробное сравнение AD9788BSVZ и AD9785BSVZRL предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The AD9785BSVZRL is a viable functional replacement candidate for the AD9788BSVZ in many dual-channel DAC applications, sharing the same package, pinout, supply architecture, and temperature range. However, designers must account for the lower maximum sample rate, reduced resolution, and narrower output bandwidth of the AD9785BSVZRL, and should validate dynamic performance and spectral requirements against the target signal chain before committing to substitution.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9788BSVZ | AD9785BSVZRL | Why it matters |
|---|---|---|---|
| Resolution (DAC Bits) | 16 bit | 12 bit | Higher resolution provides finer output quantization and lower quantization noise, directly affecting achievable signal fidelity and SFDR. |
| Number of DAC Channels | 2 (dual) | 2 (dual) | Channel count determines whether the device can drive I/Q or dual independent signal paths in a transmit chain. |
| Maximum Update Rate | 800 MSPS | 800 MSPS | Update rate sets the maximum synthesizable signal bandwidth and the placement of images in the output spectrum. |
| Output Type | Current-steering (differential current output) | Current-steering (differential current output) | Output architecture dictates the required external termination and transformer/amplifier interface for the analog signal path. |
| Digital Interface | LVDS (dual-port, DDR) | LVDS (dual-port, DDR) | Interface type and data format determine compatibility with the upstream FPGA/ASIC and the required PCB routing. |
| On-Chip Digital Signal Processing | Digital up-converter, NCO, interpolation filters | Digital up-converter, NCO, interpolation filters | Integrated DSP (NCO/interpolation) enables digital frequency shifting and reduces the host processing load for upconversion. |
| Supply Voltage | 1.8 V digital, 3.3 V analog/IO | 1.8 V digital, 3.3 V analog/IO | Supply rails must match the board power architecture; mismatches require additional regulators or level shifting. |
| Package | 100-lead TQFP-EP | 100-lead TQFP-EP | Package and footprint determine whether the parts are drop-in compatible on an existing PCB layout. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range confirms suitability for industrial-grade environments and thermal design margins. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9788BSVZ | AD9785BSVZRL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Series | TxDAC+® | TxDAC+® |
| Part Status | Active | Active |
| Number of Bits | 16 | 12 |
| Number of D/A Converters | 2 | 2 |
| Settling Time | 20ns (Typ) | 20ns (Typ) |
| Output Type | Current - Unbuffered | Current - Unbuffered |
| Differential Output | Yes | Yes |
| Data Interface | Parallel | Parallel |
| Reference Type | Internal | Internal |
| Voltage - Supply, Analog | 3.13V ~ 3.47V | 3.13V ~ 3.47V |
| Voltage - Supply, Digital | 1.7V ~ 1.9V, 3.13V ~ 3.47V | 1.7V ~ 1.9V, 3.13V ~ 3.47V |
| INL / DNL(LSB) | ±3.7, ±2.1 | ±0.3, ±0.2 |
| Architecture | Oversampling Interpolating DAC | Oversampling Interpolating DAC |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD9788BSVZ is a dual 16-bit, 800 MSPS TxDAC+ digital-to-analog converter, while the AD9785BSVZRL is a dual 12-bit, 800 MSPS TxDAC+ DAC. Both share the same 100-lead TQFP_EP (SV) package, 800 MSPS maximum update rate, and dual-channel architecture, but the AD9788 provides 16-bit resolution versus 12-bit on the AD9785. The AD9785BSVZRL is supplied in tape-and-reel form (RL suffix), whereas AD9788BSVZ is a tray/standard packaging variant.
Yes. Both devices are offered in the same 100-lead TQFP_EP (SV) package with the same pinout, allowing a common PCB footprint. Designers should still verify the specific datasheet pin descriptions and any unused or function-specific pins before substituting one for the other in an existing layout.
Yes. Both the AD9788 and AD9785 are specified for a maximum DAC update rate of 800 MSPS, making them suitable for high-speed signal synthesis applications such as broadband communications and instrumentation.
The AD9788BSVZ offers 16-bit resolution, while the AD9785BSVZRL offers 12-bit resolution. The higher resolution of the AD9788 provides finer amplitude quantization and lower quantization noise, which can improve spurious-free dynamic range (SFDR) and signal-to-noise ratio (SNR) in demanding waveform-generation applications. The AD9785 trades resolution for a lower-cost 12-bit datapath where 16-bit precision is not required.
The "RL" suffix denotes tape-and-reel packaging, which is intended for automated high-volume surface-mount assembly. The AD9788BSVZ without the RL suffix is supplied in standard tray packaging. The silicon device itself is identical to its non-reel counterpart; only the shipping/packaging format differs.
Both devices are members of the AD978x TxDAC+ family and share the same serial peripheral interface (SPI) for configuration, on-chip digital signal processing features, and dual DAC architecture. Designers should consult the respective datasheets to confirm any feature-set differences, since the AD9788 and AD9785 differ in resolution and may have differing default register settings or performance specifications.
Because both parts share the same 100-lead TQFP_EP package and pinout, the AD9785BSVZRL can be placed on a board designed for the AD9788BSVZ. However, it is not a functional drop-in replacement: the AD9785 provides only 12-bit resolution versus 16-bit on the AD9788, so system performance (SNR, SFDR, quantization noise) will differ. The substitution must be validated against the target design's resolution and dynamic-performance requirements using the manufacturer datasheets.