ADF4002BCPZ-RL7 vs ADF4007BCP

Это подробное сравнение ADF4002BCPZ-RL7 и ADF4007BCP предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADF4002BCPZ-RL7 and ADF4007BCP are both integer-N PLL frequency synthesizers in a 20-lead LFCSP package with a shared 3-wire serial interface and comparable supply requirements, making them a viable functional replacement candidate. However, the ADF4007BCP integrates an on-chip VCO and prescaler architecture optimized for fixed high-frequency synthesis, while the ADF4002BCPZ-RL7 is a standalone PLL synthesizer requiring an external VCO, so the designer must validate loop filter, reference, and RF front-end differences before substitution.

Function Architecture Validation required
Package Type High match
Serial Interface High match
Frequency Range Validation required

Parts at a glance

Part A

ADF4002BCPZ-RL7

Компания Analog Devices Inc.

Lifecycle
Active
Stock
7422 ПКС
Package
WFQFN-20
Series
Часовое время - Часовые генераторы, PLL, частотные синтезаторы
Part B

ADF4007BCP

Компания Analog Devices Inc.

Lifecycle
Active
Stock
6630 ПКС
Package
WFQFN-20
Series
Часовое время - Часовые генераторы, PLL, частотные синтезаторы

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADF4002BCPZ-RL7 ADF4007BCP Why it matters
Function PLL Frequency Synthesizer (integer-N) PLL Frequency Synthesizer (integer-N) Both are integer-N PLL synthesizers, but they target different frequency ranges and applications, affecting direct substitutability.
Maximum RF Input Frequency 400 MHz 7.5 GHz The ADF4007 supports much higher input frequencies, so it can be used in microwave/RF applications where the ADF4002 cannot operate.
Prescaler 8/9, 16/17, 32/33, 64/65 (dual-modulus) Fixed 8/9 (dual-modulus) Different prescaler options affect the achievable division ratios and loop performance for a given reference and output frequency.
Supply Voltage Range 2.7 V to 3.3 V 3.0 V to 3.6 V Overlapping but not identical supply ranges; a design operating at 2.7 V would not be compatible with the ADF4007.
Package 20-Lead LFCSP (4 mm x 4 mm) 20-Lead LFCSP (4 mm x 4 mm) Same package footprint allows potential board-level interchangeability, though pin functions must be verified.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both suit the same industrial temperature environments.
Charge Pump Current Programmable (up to 5 mA) Programmable (up to 5 mA) Similar charge pump capability supports comparable loop filter design and phase noise performance.
Interface 3-wire serial (SPI-compatible) 3-wire serial (SPI-compatible) Same serial control interface simplifies firmware reuse when migrating between the two parts.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADF4002BCPZ-RL7 ADF4007BCP
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Clock/Frequency Synthesizer (RF), Phase Detector Clock/Frequency Synthesizer (RF)
PLL Yes with Bypass Yes
Input CMOS, TTL CMOS
Output Clock Clock
Ratio - Input: Output 2:1 2:1
Differential - Input: Output Yes/No Yes/No
Frequency - Max 400MHz 7.5GHz
Divider / Multiplier Yes/No Yes/No
Voltage - Supply 2.7V ~ 3.3V 2.7V ~ 3.3V
Mounting Type Surface Mount Surface Mount
Number of Circuits 1 -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the ADF4002BCPZ-RL7 and ADF4007BCP?

The ADF4002BCPZ-RL7 is a phase frequency detector (PFD) and charge pump from Analog Devices, specified for operation up to 400 MHz, supplied in a 20-lead LFCSP (CP-20-6) package and provided in tape-and-reel format. The ADF4007BCP is a related Analog Devices PFD/charge pump specified for operation up to 7.5 GHz, supplied in a 20-lead LFCSP package. Both are frequency synthesizer building blocks intended for use with an external VCO and loop filter.

What is the maximum operating frequency of each device?

Per Analog Devices datasheets, the ADF4002 is specified for a maximum RF input frequency of 400 MHz, while the ADF4007 is specified for a maximum RF input frequency of 7.5 GHz. The ADF4007 is therefore suited to higher-frequency synthesis applications, whereas the ADF4002 targets lower-frequency PLL designs.

Are the ADF4002BCPZ-RL7 and ADF4007BCP pin-compatible?

Both devices are offered in a 20-lead LFCSP package, but pin compatibility must be confirmed against the respective Analog Devices datasheet pin configurations before any substitution. The two parts have different functional specifications and reference divider configurations, so a direct drop-in replacement should not be assumed without verifying pin functions and external component requirements.

What is the difference in reference divider capability between the two parts?

The ADF4002 includes a programmable reference divider (14-bit R counter) and a programmable feedback divider (13-bit N counter), supporting a range of PFD frequencies. The ADF4007 uses a fixed reference divider ratio of 8 and a fixed feedback divider ratio of 8, with the PFD frequency determined by the input frequency divided by 8. This fixed-divider architecture makes the ADF4007 simpler to configure but less flexible than the ADF4002.

What supply voltage do these devices require?

Both the ADF4002 and ADF4007 are specified by Analog Devices for operation from a 3.0 V to 3.6 V supply, with a nominal 3.3 V rail. The charge pump supply (VCP) can be operated at a higher voltage, up to 5.5 V, to support wider VCO tuning ranges. Designers should confirm the exact limits in the respective datasheets.

What is the significance of the -RL7 suffix on ADF4002BCPZ-RL7?

The -RL7 suffix indicates tape-and-reel packaging, with 7-inch reels, as defined in Analog Devices ordering information. The BCPZ designation identifies the 20-lead LFCSP package with Pb-free (RoHS-compliant) termination. The ADF4007BCP is supplied in the same 20-lead LFCSP package family, but its ordering suffix differs and should be checked against the manufacturer's ordering guide.

Can the ADF4007BCP be used as a direct replacement for the ADF4002BCPZ-RL7?

No, they are not direct substitutes. The ADF4007 has a fixed divide ratio of 8 in both reference and feedback paths and operates to 7.5 GHz, while the ADF4002 has programmable R and N dividers and operates to 400 MHz. The choice depends on the required PFD frequency, loop bandwidth, and VCO frequency; substituting one for the other requires revalidation of the loop filter and divider settings.

What are typical applications for each device?

The ADF4002 is commonly used in low-frequency PLL synthesizers, clock generation, and as a PFD/charge pump in wireless infrastructure and instrumentation where programmable dividers are needed. The ADF4007 is used in higher-frequency synthesis, such as microwave point-to-point radios, satellite communications, and test equipment, where its 7.5 GHz input capability and fixed divide-by-8 architecture simplify the loop design.