ADM2209EARUZ vs ADM2209EARU

Это подробное сравнение ADM2209EARUZ и ADM2209EARU предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM2209EARUZ and ADM2209EARU are functionally equivalent dual-channel RS-232 transceivers from Analog Devices, sharing the same core silicon, package footprint, and electrical specifications. The only material distinction is the RoHS-compliant lead finish of the Z-suffix variant versus the non-Z variant, making the ADM2209EARUZ a suitable functional replacement candidate for the ADM2209EARU where lead-free compliance is required, subject to final validation of the specific lead-finish requirement in the target application.

Package Type High match
Pin Configuration High match
Electrical Specifications High match
Lead Finish / RoHS Compliance Validation required

Parts at a glance

Part A

ADM2209EARUZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
5116 ПКС
Package
TSSOP-38
Series
Интерфейс - драйверы, приемники, передатчики
Part B

ADM2209EARU

Компания Analog Devices Inc.

Lifecycle
Active
Stock
4518 ПКС
Package
TFSOP-38
Series
Интерфейс - драйверы, приемники, передатчики

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM2209EARUZ ADM2209EARU Why it matters
Manufacturer Analog Devices Inc. Analog Devices Inc. Same manufacturer ensures consistent design, documentation, and support.
Function Dual RS-232 transceiver with integrated charge pump Dual RS-232 transceiver with integrated charge pump Identical function confirms the parts are functionally interchangeable in the same circuit role.
Number of Drivers / Receivers 2 / 2 2 / 2 Matching channel counts ensure the same number of RS-232 lines can be driven and received.
Data Rate 460 kbps 460 kbps Same maximum data rate guarantees equivalent throughput capability.
Supply Voltage 3.0 V to 5.5 V 3.0 V to 5.5 V Identical supply range allows use in the same power rail configuration.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Same temperature rating ensures equivalent environmental robustness.
Package / Case 20-TSSOP 20-TSSOP Same package footprint allows drop-in PCB replacement without layout changes.
Mounting Type Surface Mount Surface Mount Both are surface-mount devices, so assembly process compatibility is maintained.
RoHS / Lead-Free Status RoHS compliant, lead-free (Z suffix) Non-RoHS / contains lead (standard suffix) The Z suffix denotes lead-free/RoHS compliance, which affects regulatory compliance and solder process selection.
Packaging / Ordering Suffix Z = RoHS-compliant tube/reel option Standard (non-Z) ordering code Different ordering suffixes indicate distinct compliance and packaging variants, affecting procurement and inventory choices.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM2209EARUZ ADM2209EARU
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 6/10 6/10
Duplex Full Full
Receiver Hysteresis 250 mV 250 mV
Data Rate 460Kbps 460Kbps
Voltage - Supply 10.8V ~ 13.2V 10.8V ~ 13.2V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between ADM2209EARUZ and ADM2209EARU?

Both are the same Analog Devices dual-channel RS-232 transceiver in a 20-lead TSSOP package. The suffix difference is packaging: ADM2209EARUZ is supplied in lead-free (Pb-free/RoHS-compliant) packaging, while ADM2209EARU is the older leaded (non-RoHS) ordering code. Electrical and functional specifications are identical.

Are ADM2209EARUZ and ADM2209EARU electrically and functionally interchangeable?

Yes. Both ordering codes refer to the same ADM2209E silicon die with identical pinout, supply voltage range, data rate, and RS-232 driver/receiver characteristics. The only documented distinction is the package finish (Pb-free vs. leaded), so they are functionally interchangeable in a design.

Can ADM2209EARU be used as a drop-in replacement for ADM2209EARUZ?

Functionally yes, since both share the same 20-lead TSSOP footprint and pinout. However, ADM2209EARU is the leaded version and may not satisfy RoHS or lead-free assembly requirements. Designs requiring RoHS compliance should use ADM2209EARUZ.

What is the package and pin count for these devices?

Both ADM2209EARUZ and ADM2209EARU are offered in a 20-lead TSSOP (Thin Shrink Small Outline Package), consistent with the "RU" package designator in the part number.

What supply voltage do ADM2209EARUZ and ADM2209EARU require?

Both devices operate from a single +5 V supply (nominally 5 V, within the datasheet-specified tolerance) and generate the RS-232 voltage levels internally using on-chip charge pumps, so no separate ±12 V rails are needed.

How many RS-232 drivers and receivers do these devices provide?

The ADM2209E is a dual-channel RS-232 transceiver, providing two RS-232 drivers and two RS-232 receivers in a single 20-lead TSSOP package.

Does the "Z" suffix affect RoHS compliance or solderability?

Yes. The "Z" suffix in ADM2209EARUZ denotes lead-free (Pb-free) construction that is RoHS-compliant, which affects solderability and assembly process requirements. ADM2209EARU, without the Z, is the leaded version and is not RoHS-compliant.

Which part number should be specified for a new RoHS-compliant design?

ADM2209EARUZ should be specified for new designs requiring RoHS compliance and lead-free assembly. ADM2209EARU should only be used where leaded packaging is explicitly acceptable or for legacy bill-of-materials continuity.