ADM3050EBRIZ-RL vs ADM3076EARZ

Это подробное сравнение ADM3050EBRIZ-RL и ADM3076EARZ предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADM3076EARZ and ADM3050EBRIZ-RL are not drop-in replacements for one another. Although both are Analog Devices RS-485 transceivers, they differ in isolation, data rate, supply voltage, and package, so substituting one for the other requires full design validation.

Different isolation Different data rate Different supply voltage Different package

Parts at a glance

Part A

ADM3050EBRIZ-RL

Компания Analog Devices Inc.

Lifecycle
Active
Stock
4470 ПКС
Package
SOIC-8
Series
Интерфейс - драйверы, приемники, передатчики
Part B

ADM3076EARZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
5876 ПКС
Package
SOIC-14
Series
Интерфейс - драйверы, приемники, передатчики

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3076EARZ ADM3050EBRIZ-RL Why it matters
Function / Protocol RS-485/RS-422 transceiver Isolated CAN transceiver (CAN FD capable) These devices serve entirely different bus protocols (RS-485 vs CAN), so they are not functionally interchangeable in a given network.
Isolation Non-isolated Galvanically isolated (5 kV rms) Isolation protects against ground loops and high common-mode voltages; the isolated part suits harsh or safety-critical environments.
Data Rate Up to 16 Mbps Up to 12 Mbps (CAN FD) Maximum signaling speed determines the achievable bus throughput and timing margin for the application.
Supply Voltage 3.3 V single supply 5 V (VCC) with 3.3 V/5 V logic supply (VIO) Supply requirements dictate power-rail design and logic-level compatibility with the host controller.
Duplex / Channel Type Full duplex Half duplex (single CAN channel) Duplex configuration affects wiring topology and whether simultaneous transmit/receive is possible.
Package 8-lead SOIC 20-lead SOIC (wide body) Footprint and pin count must match the PCB layout; different packages require board redesign.
Operating Temperature Range -40 °C to +85 °C -40 °C to +105 °C The temperature range defines the environments in which the part can reliably operate.
Number of Transceivers / Drivers 1 driver, 1 receiver 1 CAN transceiver The channel count and driver/receiver arrangement determine how many bus lines the device can interface with.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3050EBRIZ-RL ADM3076EARZ
Series iCoupler® -
Part Status Active Active
Type Transceiver, Isolated Transceiver
Protocol CAN RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Data Rate 12Mbps 16Mbps
Voltage - Supply 0.5V ~ 6V 3V ~ 3.6V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Duplex - Full
Receiver Hysteresis - 100 mV

Frequently asked questions

What are the primary functional differences between the ADM3076EARZ and the ADM3050EBRIZ-RL?

The ADM3076EARZ is a 3.3 V, ±15 kV ESD protected, half-duplex RS-485/RS-422 transceiver specified for data rates up to 16 Mbps. The ADM3050EBRIZ-RL is a 5 kV rms isolated CAN FD transceiver compliant with ISO 11898-2:2016, supporting data rates up to 12 Mbps. They serve different bus protocols (RS-485 vs. CAN FD) and are not functionally interchangeable.

Are the ADM3076EARZ and ADM3050EBRIZ-RL pin-to-pin compatible?

No. The ADM3076EARZ is offered in an 8-lead SOIC_N package, while the ADM3050EBRIZ-RL is supplied in a 16-lead SOIC_W package with different pin functions. The two devices have different pin counts, pinouts, and package body widths, so they cannot be dropped into the same PCB footprint.

Do these devices provide galvanic isolation?

The ADM3050EBRIZ-RL includes 5 kV rms galvanic isolation between the logic side and the CAN bus side, rated per UL 1577 and CSA. The ADM3076EARZ is a non-isolated RS-485/RS-422 transceiver and does not provide galvanic isolation; external isolation would be required if isolation is needed in the application.

What supply voltages do the ADM3076EARZ and ADM3050EBRIZ-RL require?

The ADM3076EARZ operates from a single 3.3 V supply (3.0 V to 3.6 V). The ADM3050EBRIZ-RL requires two supplies: VCC1 for the logic side (1.7 V to 5.5 V) and VCC2 for the isolated CAN bus side (4.5 V to 5.5 V), consistent with its integrated isolated DC-to-DC converter architecture.

Which device supports CAN FD, and which supports RS-485?

The ADM3050EBRIZ-RL is a CAN FD transceiver compliant with ISO 11898-2:2016, supporting data rates up to 12 Mbps. The ADM3076EARZ is an RS-485/RS-422 transceiver supporting data rates up to 16 Mbps. The choice depends on whether the target network uses CAN FD or RS-485/RS-422 signaling.

What ESD protection levels are specified for each device?

The ADM3076EARZ specifies ±15 kV ESD protection on the RS-485 bus pins (human body model) per the Analog Devices datasheet. The ADM3050EBRIZ-RL specifies bus-side ESD protection per IEC 61000-4-2 on the CAN pins; designers should consult the ADM3050E datasheet for the exact contact and air-discharge ratings before finalizing protection strategy.

Can the ADM3076EARZ be used as a substitute for the ADM3050EBRIZ-RL in an existing CAN design?

No. The ADM3076EARZ is an RS-485/RS-422 transceiver and does not implement the CAN or CAN FD protocol, nor does it provide isolation. Substituting it into a CAN FD node would not provide compliant CAN signaling, isolation, or the required bus fault tolerance, so it is not a valid replacement.

What are the typical target applications for each device?

The ADM3076EARZ is typically used in industrial RS-485/RS-422 networks such as building automation, motor control, and multi-point data links where a 3.3 V half-duplex transceiver with high ESD protection is needed. The ADM3050EBRIZ-RL is intended for isolated CAN FD nodes in automotive, industrial, and medical systems requiring 5 kV rms isolation and ISO 11898-2:2016 compliance.