ADM3485EAR vs ADM3485EARZ

Это подробное сравнение ADM3485EAR и ADM3485EARZ предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3485EARZ and ADM3485EAR are functionally equivalent RS-485/RS-422 transceivers from the same manufacturer family, sharing identical core electrical specifications, package footprint, and operating conditions. The primary distinction lies in the lead-free (RoHS-compliant) finish of the ADM3485EARZ versus the standard finish of the ADM3485EAR, making the EARZ variant a suitable drop-in candidate where environmental compliance is required, subject to final validation of solderability and assembly process compatibility.

Data Rate and Protocol High match
Package and Pinout High match
Supply Voltage and Temperature Range High match
RoHS and Lead Finish Validation required

Parts at a glance

Part A

ADM3485EAR

Компания Analog Devices Inc.

Lifecycle
Active
Stock
3150 ПКС
Package
SOIC-8
Series
Интерфейс - драйверы, приемники, передатчики
Part B

ADM3485EARZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
2248 ПКС
Package
SOIC-8
Series
Интерфейс - драйверы, приемники, передатчики

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3485EARZ ADM3485EAR Why it matters
Data Rate 10 Mbps 10 Mbps Determines the maximum communication speed the transceiver supports; identical here so no functional difference.
Number of Drivers/Receivers 1/1 1/1 Defines the half-duplex configuration; both are single-driver, single-receiver devices, so they are interchangeable in this respect.
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V Specifies the operating supply range; matching values ensure the same power rail compatibility.
Duplex Mode Half-duplex Half-duplex Determines whether the device can transmit and receive simultaneously; both are half-duplex, so bus topology requirements are the same.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Indicates the environmental range for reliable operation; identical ranges mean the same application environments are supported.
Mounting Type Surface Mount Surface Mount Affects PCB assembly and footprint; both are surface-mount, so board-level integration is equivalent.
Package / Case 8-SOIC (0.154", 3.90mm Width) 8-SOIC (0.154", 3.90mm Width) Tape & Reel The package outline is the same, but the Z suffix denotes a lead-free/RoHS-compliant tube or tray variant versus the tape-and-reel packaging of the non-Z part; this affects ordering format and compliance, not the footprint.
RoHS / Lead-Free Status RoHS Compliant, Lead-Free RoHS Compliant (packaging variant) The Z suffix in ADM3485EARZ explicitly denotes the lead-free/RoHS-compliant version; this matters for regulatory compliance and solder process selection.
Protocol RS-485 / RS-422 RS-485 / RS-422 Defines the serial interface standard supported; both support the same protocols, ensuring network compatibility.
Receiver Hysteresis 20 mV 20 mV Provides noise immunity on the bus; identical hysteresis means equivalent noise margin performance.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3485EAR ADM3485EARZ
Part Status Obsolete Active
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Duplex Half Half
Receiver Hysteresis 50 mV 50 mV
Data Rate 10Mbps 10Mbps
Voltage - Supply 3V ~ 3.6V 3V ~ 3.6V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between ADM3485EARZ and ADM3485EAR?

The ADM3485EARZ is the RoHS-compliant, lead-free (Pb-free) version of the ADM3485EAR. Both are ±15 kV ESD-protected, 3.3 V, half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package. The "Z" suffix in ADM3485EARZ denotes the RoHS-compliant packaging option per Analog Devices' ordering guide.

Are ADM3485EARZ and ADM3485EAR electrically and functionally identical?

Yes. Both devices share the same datasheet specifications: 3.3 V single-supply operation, half-duplex RS-485/RS-422, data rates up to 12 Mbps, ±15 kV ESD protection on the bus pins, and an 8-lead SOIC package. The only documented difference is the RoHS/lead-free compliance designation indicated by the "Z" suffix.

Can ADM3485EARZ be used as a drop-in replacement for ADM3485EAR?

Yes, in most cases. Both parts use the same 8-lead SOIC footprint and pinout, so the ADM3485EARZ is a form-fit-function replacement for the ADM3485EAR. Designs requiring RoHS compliance should use the ADM3485EARZ.

What are the key technical specifications shared by ADM3485EARZ and ADM3485EAR?

Both are 3.3 V, half-duplex RS-485/RS-422 transceivers with data rates up to 12 Mbps, ±15 kV ESD protection (HBM) on the RS-485 bus pins, a 1/8-unit-load receiver input impedance allowing up to 256 nodes on the bus, and an 8-lead SOIC package. They operate over the industrial temperature range of −40 °C to +85 °C.

Which part should be selected for a new RoHS-compliant design?

The ADM3485EARZ should be selected for new designs requiring RoHS compliance, as the "Z" suffix designates the lead-free, RoHS-compliant package option. The ADM3485EAR is the non-RoHS legacy ordering code.

Do ADM3485EARZ and ADM3485EAR differ in ESD protection or data rate?

No. Both devices are specified with ±15 kV ESD protection on the RS-485 bus pins and support data rates up to 12 Mbps, per the Analog Devices datasheet. No performance difference is documented between the two ordering codes.

Are ADM3485EARZ and ADM3485EAR available in the same package?

Yes. Both are offered in the 8-lead SOIC package (R-8 suffix). The package dimensions and pinout are identical, so PCB land patterns are interchangeable between the two ordering codes.