ADM489ARZ vs ADM4856AR

Это подробное сравнение ADM489ARZ и ADM4856AR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM489ARZ and ADM4856AR are both half-duplex RS-485 transceivers in 8-pin SOIC packages with 5 V supply operation, making them functionally comparable for many bus-interface designs. However, they differ in driver slew-rate class and data rate, receiver input impedance, and quiescent supply current, so the ADM4856AR should be validated against the ADM489ARZ in the target network before being adopted as a direct substitute.

Package Type High match
Supply Voltage High match
Data Rate Validation required
Receiver Input Impedance Validation required

Parts at a glance

Part A

ADM489ARZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
3659 ПКС
Package
SOIC-14
Series
Интерфейс - драйверы, приемники, передатчики
Part B

ADM4856AR

Компания Analog Devices Inc.

Lifecycle
Active
Stock
966 ПКС
Package
SOIC-8
Series
Интерфейс - драйверы, приемники, передатчики

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM489ARZ ADM4856AR Why it matters
Data Rate 250 kbps 20 Mbps Maximum signaling speed; the two parts differ by nearly two orders of magnitude, so they are not interchangeable in high-speed buses.
Duplex Mode Full duplex Half duplex Full duplex allows simultaneous transmit and receive on separate pairs, while half duplex shares one pair; this changes the wiring and protocol topology.
Number of Drivers / Receivers 1 driver / 1 receiver 1 driver / 1 receiver Transceiver channel count determines how many bus lines can be driven and monitored per package.
Supply Voltage 5 V 5 V Operating supply rail must match the system power domain for proper logic and bus levels.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Industrial temperature range affects suitability for harsh environments and reliability margins.
Package / Mounting 8-SOIC (surface mount) 8-SOIC (surface mount) Footprint and mounting style must match the PCB layout for a drop-in replacement.
Receiver Input Impedance 1/4 unit load (≥48 kΩ) 1/8 unit load (≥96 kΩ) Unit-load rating determines how many nodes can share a bus; higher impedance allows more devices on the same network.
Fail-Safe Receiver Yes (open-circuit fail-safe) Yes (true fail-safe) Fail-safe behavior guarantees a defined logic state when the bus is idle, open, or shorted, preventing spurious data.
ESD Protection (Bus Pins) ±15 kV (HBM) ±15 kV (HBM) Bus-pin ESD rating indicates robustness against transient surges in field wiring.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM489ARZ ADM4856AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Full -
Receiver Hysteresis 70 mV -
Data Rate 250kbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the primary functional differences between the ADM489ARZ and the ADM4856AR?

The ADM489ARZ is a 5 V, low-power, differential line transceiver designed for RS-485/RS-422 communication, specified for data rates up to 250 kbps. The ADM4856AR is a 3.3 V, half-duplex, differential line transceiver intended for RS-485/RS-422 applications, specified for data rates up to 20 Mbps. The two devices differ in supply voltage, maximum data rate, and package/pinout.

Are the ADM489ARZ and ADM4856AR pin-to-pin compatible?

No. The ADM489ARZ is supplied in an 8-lead SOIC package, while the ADM4856AR is supplied in an 8-lead SOIC package as well, but the pin functions and supply voltage requirements differ between the two devices. A direct drop-in replacement should not be assumed without verifying the pinout and supply rail against the respective manufacturer datasheets.

What supply voltage does each device require?

The ADM489ARZ operates from a single 5 V supply. The ADM4856AR operates from a single 3.3 V supply. The supply voltage difference is a key consideration when evaluating interchangeability in an existing design.

What are the maximum data rates supported by each part?

The ADM489ARZ is specified for data rates up to 250 kbps. The ADM4856AR is specified for data rates up to 20 Mbps. The ADM4856AR therefore supports significantly higher signaling rates than the ADM489ARZ.

Do both devices support half-duplex RS-485 operation?

Yes. Both the ADM489ARZ and the ADM4856AR are half-duplex differential transceivers intended for RS-485/RS-422 communication, with driver and receiver enable controls for bus sharing.

Can the ADM4856AR be used as a replacement for the ADM489ARZ in a 5 V system?

No. The ADM4856AR is specified for 3.3 V operation, so it should not be used in a 5 V system without confirming absolute maximum ratings and recommended operating conditions from the manufacturer datasheet. Substitution requires validating supply voltage, logic levels, data rate, and pinout against the target design.

What package types are used for these two devices?

Both the ADM489ARZ and the ADM4856AR are offered in 8-lead SOIC packages. Designers should confirm the exact package suffix and land pattern from the respective manufacturer datasheets before layout or replacement.