ADN2816ACPZ
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5594 ПКС
- Package
- LFCSP-32
- Series
- Часовое время - специфическое приложение
Это подробное сравнение ADN2816ACPZ и ADN2850BCPZ250 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADN2816ACPZ and ADN2850BCPZ250 serve fundamentally different functions and cannot be treated as interchangeable. The ADN2816ACPZ is a clock and data recovery IC for optical receiver front ends, while the ADN2850BCPZ250 is a dual-channel digital potentiometer. Their differing signal interfaces, channel architecture, package footprints, and operating characteristics make direct substitution impractical without a complete redesign of the surrounding circuit.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADN2816ACPZ | ADN2850BCPZ250 | Why it matters |
|---|---|---|---|
| Function / Device Type | Clock and data recovery (CDR) IC with quantizer | Dual-channel digital potentiometer (nonvolatile) | These are fundamentally different device classes, so they are not functionally substitutable in any design. |
| Primary Application | SONET/SDH, Gigabit Ethernet, and fiber-optic receiver data recovery | Programmable resistance/voltage adjustment, calibration, and signal level setting | The intended use cases do not overlap, confirming they serve unrelated circuit functions. |
| Supply Voltage | 3.3 V (3.0 V to 3.6 V) | 2.7 V to 5.5 V (dual supply capable) | Different supply requirements affect power rail compatibility and board-level integration. |
| Package | 32-lead LFCSP (5 mm x 5 mm) | 24-lead LFCSP (4 mm x 4 mm) | Different footprint and pin count prevent drop-in board replacement. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Both meet industrial temperature requirements, though this does not offset their functional differences. |
| Interface / Control | Analog/differential data input with recovered clock and data outputs | SPI-compatible serial interface for wiper position control | The control and signal interfaces are entirely different, so neither can emulate the other in a system. |
| Data Rate / Resolution | Supports OC-3 to OC-48 (up to 2.7 Gbps) data rates | 250 kΩ end-to-end resistance with 1024-position resolution | One specifies serial data throughput while the other specifies resistance resolution, highlighting their distinct roles. |
| Nonvolatile Memory | None | EEPROM stores wiper settings | Only the digital potentiometer retains configuration across power cycles, a capability irrelevant to the CDR device. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADN2816ACPZ | ADN2850BCPZ250 |
|---|---|---|
| Part Status | Active | Active |
| PLL | Yes | - |
| Main Purpose | SONET/SDH | - |
| Input | CML | - |
| Output | LVDS | - |
| Number of Circuits | 1 | - |
| Ratio - Input: Output | 1:2 | - |
| Differential - Input: Output | Yes/Yes | - |
| Frequency - Max | 675MHz | - |
| Voltage - Supply | 3V ~ 3.6V | - |
| Operating Temperature | -40°C ~ 85°C | - |
| Mounting Type | Surface Mount | - |
No. The ADN2816ACPZ is a clock and data recovery (CDR) IC for continuous-rate 10 Mbps to 675 Mbps SONET/SDH, Fibre Channel, and Ethernet applications, while the ADN2850BCPZ250 is a dual-channel, 250 kΩ, 1024-position nonvolatile digital potentiometer. They serve entirely different functions and are not interchangeable.
The ADN2816ACPZ provides clock and data recovery with integrated limiting amplifier and quantization functions for serial data streams. The ADN2850BCPZ250 provides digitally controlled variable resistance via an SPI-compatible interface, with two independent 250 kΩ channels and nonvolatile EEMEM storage of wiper settings.
No. The ADN2816ACPZ is supplied in a 32-lead LFCSP (5 mm × 5 mm) package, while the ADN2850BCPZ250 is supplied in a 24-lead LFCSP (4 mm × 4 mm) package. Pin counts, pin functions, and PCB land patterns differ, so neither device can be dropped into the other's footprint.
The ADN2816ACPZ operates from a single 3.3 V supply (3.0 V to 3.6 V). The ADN2850BCPZ250 operates from a 2.7 V to 5.5 V single supply (or ±2.5 V dual supply), with a separate VDD for the digital interface. Designs must account for these different supply requirements.
The ADN2816ACPZ supports continuous data rates from 10 Mbps to 675 Mbps, provides quantified output with typical jitter generation below 0.1 UI rms, and includes loss-of-lock and loss-of-signal detection. It is specified for SONET/SDH OC-1/OC-3/OC-12, Fibre Channel, and Gigabit Ethernet applications.
The ADN2850BCPZ250 offers two independent 250 kΩ, 1024-position digital potentiometers with ±1% resistor tolerance (B version), an SPI-compatible serial interface, nonvolatile EEMEM for wiper position storage, and an operating temperature range of −40 °C to +85 °C. It is used for gain adjustment, offset trimming, and programmable resistance applications.
No. The ADN2850BCPZ250 has an SPI-compatible digital interface for wiper control. The ADN2816ACPZ does not have an SPI control interface; its configuration and status are handled through dedicated pins (such as SDO, SDATA, SCLK for its internal register access) and hardware control pins. They cannot share a common control bus in the same manner.
The ADN2816ACPZ is specified over the −40 °C to +85 °C industrial temperature range. The ADN2850BCPZ250 is also specified over −40 °C to +85 °C. Both are industrial-grade parts, but each must be evaluated against its own datasheet limits for the target application.