ADS1220IPW
Техасские инструменты
- Lifecycle
- Active
- Stock
- 4062 ПКС
- Package
- TSSOP-16
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS1220IPW и ADS1208IPWRG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS1220IPW and ADS1208IPWRG4 are not drop-in replacements for one another. The ADS1220IPW is a 24-bit, 4-channel delta-sigma ADC with an integrated PGA and SPI interface, while the ADS1208IPWRG4 is a single-channel, 16-bit delta-sigma modulator with a Manchester-coded bitstream output. Their differing resolution, channel count, output interface, and package footprint make direct substitution impractical without redesign of the surrounding signal chain and interface logic.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1220IPW | ADS1208IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device. |
| Architecture | Delta-Sigma (with PGA and input mux) | Delta-Sigma modulator | The ADS1220 integrates a PGA and input multiplexer for direct sensor connection, while the ADS1208 is a modulator-only device requiring external digital filtering, affecting system design and substitutability. |
| Number of input channels | 4 (differential/ single-ended via mux) | 1 (differential) | Channel count determines how many signals can be measured without external multiplexing; the ADS1220 supports multi-channel sensing while the ADS1208 handles a single differential input. |
| Interface type | SPI | Serial (modulator bitstream output) | The digital interface must match the host controller; SPI provides register-based configuration and data readout, whereas the ADS1208 outputs a raw modulator bitstream needing external filtering. |
| Supply voltage (analog) | 2.3 V to 5.5 V | 4.5 V to 5.5 V | Supply range affects compatibility with low-voltage systems; the ADS1220 operates down to 2.3 V, while the ADS1208 requires a nominal 5 V supply. |
| Integrated PGA | Yes (gain 1 to 128) | No | An integrated PGA allows direct amplification of small sensor signals without external components; its absence in the ADS1208 requires external signal conditioning. |
| Package | TSSOP-16 | TSSOP-16 | Package footprint affects PCB layout and drop-in compatibility; both share the same TSSOP-16 footprint, easing board-level substitution. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +85 °C | The temperature range determines suitability for harsh environments; the ADS1220 supports a wider industrial range than the ADS1208. |
| Typical application focus | Precision sensor measurement (temperature, pressure, load cells) | Motor control and current sensing (with external digital filter) | The intended application domain indicates functional substitutability; the ADS1220 targets precision sensor acquisition while the ADS1208 targets isolated/current-sense modulator applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1220IPW | ADS1208IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 2k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 2.7V ~ 5.5V, 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 2, 4 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | MUX-PGA-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External, Internal, Supply | - |
| Voltage - Supply, Analog | 2.3V ~ 5.5V, ±2.5 | - |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | - |
| Features | PGA, Temperature Sensor | - |
The ADS1220IPW is a 24-bit, 4-channel, delta-sigma analog-to-digital converter (ADC) with an integrated programmable gain amplifier (PGA), voltage reference, and SPI interface, housed in a TSSOP-16 package. The ADS1208IPWRG4 is a 16-bit, single-channel, second-order delta-sigma modulator with a ±2.5 V input range and a digital output, housed in a TSSOP-16 package. The ADS1220 integrates a complete ADC signal chain, while the ADS1208 provides a modulated bitstream requiring external digital filtering.
No. Although both devices are offered in a TSSOP-16 package, their pin functions and internal architectures differ. The ADS1220IPW provides SPI communication, analog inputs, and reference pins, whereas the ADS1208IPWRG4 provides a modulator clock input and a single-bit data output. A direct drop-in replacement is not possible without redesigning the PCB and firmware.
The ADS1220IPW offers up to 24-bit resolution with programmable data rates from 5 SPS to 2,000 SPS. The ADS1208IPWRG4 is a 16-bit delta-sigma modulator with a specified clock frequency of up to 10 MHz, producing a bitstream that is decimated externally to achieve the desired resolution and output rate.
The ADS1220IPW supports four single-ended or two differential input channels with a programmable gain amplifier offering gains from 1 to 128. The ADS1208IPWRG4 provides a single differential input channel with a fixed ±2.5 V input range and no integrated PGA.
The ADS1220IPW is better suited for multi-channel sensor measurement because it integrates a 4-channel input multiplexer, a PGA, and a precision voltage reference in a single package. The ADS1208IPWRG4 is a single-channel modulator and would require external multiplexing and signal conditioning for multi-channel applications.
No. The ADS1220IPW uses a standard SPI-compatible serial interface for configuration and data readout. The ADS1208IPWRG4 outputs a single-bit delta-sigma modulated data stream and requires an external digital filter or microcontroller to decimate the bitstream; it does not provide an SPI register interface.
The ADS1220IPW operates from an analog supply (AVDD) of 2.3 V to 5.5 V and a digital supply (DVDD) of 2.3 V to 5.5 V. The ADS1208IPWRG4 operates from a single 5 V supply (4.5 V to 5.5 V) for both analog and digital sections, as specified in the manufacturer datasheet.