ADS1282HIPWR
Техасские инструменты
- Lifecycle
- Active
- Stock
- 5203 ПКС
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS1282HIPWR и ADS1256IDBT предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS1256IDBT and ADS1282HIPWR are not drop-in replacements for one another. They differ in resolution, input architecture, package footprint, and power supply requirements, so a direct board-level substitution is not feasible without redesign.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1256IDBT | ADS1282HIPWR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 31 | Higher resolution enables finer signal detail and lower quantization noise, which is critical for precision measurement and seismic/energy-exploration applications. |
| Maximum Sample Rate (SPS) | 30k | 4k | Sample rate determines the bandwidth of signals that can be captured; the ADS1256 supports much faster throughput for multiplexed multi-channel scanning. |
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 2 (differential) | Channel count defines how many sensors can be interfaced; the ADS1256 suits multi-sensor systems while the ADS1282 targets single- or dual-channel high-fidelity acquisition. |
| Input Type | Single-ended / Differential (multiplexed) | Differential | Differential-only inputs offer better common-mode rejection and noise immunity, whereas multiplexed single-ended inputs provide flexibility for many channels. |
| Interface | SPI | SPI | Both use SPI, so host microcontroller compatibility is similar, though register maps and command sets differ and require firmware changes. |
| Supply Voltage (Analog) | 5 V (single analog supply) | 5 V (analog) with separate digital supply | Supply requirements affect board-level power design and whether level shifting or separate rails are needed for the digital interface. |
| PGA / Gain Stages | Integrated PGA (gain 1 to 64) | Integrated PGA (gain 1 to 64) | An integrated PGA allows direct connection of low-level sensors without external amplification, simplifying the analog front end. |
| Package | TSSOP-28 | TSSOP-28 | Matching package footprints can ease PCB layout reuse, though pinouts and surrounding circuitry still differ between the two devices. |
| Typical Application Focus | Multi-channel industrial measurement, instrumentation, data acquisition | Seismic, energy exploration, high-resolution sensor digitization | Application focus indicates the intended noise/bandwidth trade-off and helps assess functional substitutability for a given system. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1282HIPWR | ADS1256IDBT |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 31 | 24 |
| Sampling Rate (Per Second) | 4k | - |
| Number of Inputs | 2 | 4, 8 |
| Input Type | Differential | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | ADC | MUX-PGA-ADC |
| Number of A / D Converters | 1 | - |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 1.65V ~ 3.6V | 1.8V ~ 3.6V |
| Features | PGA | PGA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | - |
| Base Product Number | ADS1282 | - |
| Sampling Rate(Per Second) | - | 30k |
| Number of A/D Converters | - | 1 |
The ADS1256IDBT is a 24-bit, 8-channel delta-sigma ADC with a maximum data rate of 30 kSPS, housed in a TSSOP-28 package. The ADS1282HIPWR is a 31-bit, 2-channel delta-sigma ADC designed for seismic and high-resolution measurement applications, offering a maximum data rate of 4 kSPS and housed in a TSSOP-28 package. The ADS1282 provides higher resolution and lower noise for low-frequency signals, while the ADS1256 offers more input channels and a higher sampling rate.
No. Although both devices are offered in a TSSOP-28 package, their pin functions and internal architectures differ. The ADS1256 integrates an 8-channel input multiplexer and GPIO pins, while the ADS1282 integrates a 2-channel multiplexer with a different digital interface and control pin arrangement. Direct PCB substitution without redesign is not supported.
The ADS1282HIPWR provides 31-bit resolution and is specified with very low noise suitable for seismic and precision low-frequency measurement. The ADS1256IDBT provides 24-bit resolution with noise performance optimized for general-purpose multi-channel data acquisition. For applications requiring the lowest noise at low output data rates, the ADS1282 is the higher-performance choice.
The ADS1256IDBT supports programmable data rates up to 30 kSPS. The ADS1282HIPWR supports programmable data rates up to 4 kSPS. The ADS1256 is therefore better suited to applications requiring faster sampling, while the ADS1282 targets high-resolution, low-frequency measurements.
The ADS1256IDBT provides an 8-channel input multiplexer that can be configured as 8 single-ended or 4 differential inputs. The ADS1282HIPWR provides a 2-channel input multiplexer. The ADS1256 is preferable when multiple sensor channels must be digitized by a single ADC.
Yes. Both the ADS1256IDBT and ADS1282HIPWR provide an SPI-compatible serial interface for configuration and data readout. However, the register maps, command sets, and timing specifications differ between the two devices, so firmware must be adapted accordingly.
The ADS1256IDBT is typically used in multi-channel industrial data acquisition, instrumentation, and process control where 24-bit resolution and up to 30 kSPS are sufficient. The ADS1282HIPWR is intended for high-resolution seismic recording, energy exploration, and precision low-frequency measurement where 31-bit resolution and very low noise are required.
No. Despite sharing a TSSOP-28 package, the two devices differ in resolution, channel count, data rate, register map, and pin functions. A drop-in replacement is not possible; any substitution requires a full schematic, layout, and firmware review against the respective manufacturer datasheets.