ADS1271IBPWR vs ADS1282IPWG4

Это подробное сравнение ADS1271IBPWR и ADS1282IPWG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1271IBPWR and ADS1282IPWG4 are both 24-bit delta-sigma ADCs, but they differ fundamentally in resolution architecture, package footprint, and functional feature set, so the ADS1282IPWG4 cannot serve as a direct drop-in substitute for the ADS1271IBPWR without board-level redesign and firmware revalidation.

Different package footprint Different data rate range Different supply architecture Different integrated features

Parts at a glance

Part A

ADS1271IBPWR

Техасские инструменты

Lifecycle
Active
Stock
6728 ПКС
Package
TSSOP-16
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)
Part B

ADS1282IPWG4

Техасские инструменты

Lifecycle
Active
Stock
2429 ПКС
Package
TSSOP-28
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1271IBPWR ADS1282IPWG4 Why it matters
Resolution (bits) 24 31 Higher resolution enables finer signal detail and lower quantization noise, which is critical for precision measurement and seismic/energy-exploration applications.
Max Sample Rate (SPS) 105k 4k Sample rate determines the bandwidth of signals the ADC can capture; the ADS1271 suits wideband industrial measurement while the ADS1282 targets low-frequency high-resolution sensing.
Input Type Differential Differential Differential inputs reject common-mode noise and improve dynamic range, which is essential for accurate low-level signal acquisition.
Architecture Delta-Sigma Delta-Sigma Delta-sigma architecture provides high resolution through oversampling and noise shaping, making both parts suitable for precision sensing.
Supply Voltage (Analog) 5 V 5 V Analog supply voltage affects input range and noise performance; matching supplies simplifies board-level substitution.
Interface SPI SPI A compatible serial interface allows reuse of the same digital host and firmware, reducing redesign effort when substituting parts.
Package TSSOP-16 TSSOP-28 Package footprint and pin count must match the PCB layout; differing packages require layout changes and are not drop-in compatible.
Operating Temperature Range -40 to +105 °C -40 to +85 °C The temperature range determines suitability for harsh environments; the wider range of the ADS1271 may be required in industrial or outdoor deployments.
PGA / Gain Stage No Yes An integrated PGA allows direct connection of low-level sensors without external amplification, simplifying the signal chain for the ADS1282.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1271IBPWR ADS1282IPWG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 24 31
Sampling Rate(Per Second) 105k 4k
Number of Inputs 1 1
Input Type Differential Differential
Data Interface SPI SPI
Configuration ADC ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 1.65V ~ 3.6V 1.65V ~ 3.6V
Features - PGA
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C

Frequently asked questions

What are the primary differences between the ADS1271IBPWR and ADS1282IPWG4?

The ADS1271IBPWR is a 24-bit, 105 kSPS delta-sigma ADC with a single channel, while the ADS1282IPWG4 is a 31-bit, 4 kSPS delta-sigma ADC with two channels and an integrated PGA. The ADS1282IPWG4 targets high-resolution seismic and energy exploration applications, whereas the ADS1271IBPWR targets industrial measurement and vibration analysis.

Do the ADS1271IBPWR and ADS1282IPWG4 have compatible package footprints?

No. The ADS1271IBPWR is supplied in a TSSOP-16 package, and the ADS1282IPWG4 is supplied in a TSSOP-28 package. The different pin counts and land patterns prevent a direct drop-in replacement without PCB redesign.

What are the maximum sample rates of the ADS1271IBPWR and ADS1282IPWG4?

The ADS1271IBPWR supports data rates up to 105 kSPS in high-speed mode. The ADS1282IPWG4 supports data rates up to 4 kSPS. The ADS1271IBPWR is therefore better suited for higher-bandwidth signal acquisition.

How do the resolution specifications of the ADS1271IBPWR and ADS1282IPWG4 compare?

The ADS1271IBPWR is a 24-bit delta-sigma ADC. The ADS1282IPWG4 provides 31-bit resolution. The higher resolution of the ADS1282IPWG4 supports precision applications requiring very low noise and wide dynamic range.

Do both devices include an integrated programmable gain amplifier (PGA)?

No. The ADS1282IPWG4 includes an integrated PGA, while the ADS1271IBPWR does not include an on-chip PGA. Designs using the ADS1271IBPWR requiring gain must provide external signal conditioning.

What are the supply voltage requirements for the ADS1271IBPWR and ADS1282IPWG4?

The ADS1271IBPWR operates from a 5 V analog supply and a 1.8 V to 3.3 V digital supply. The ADS1282IPWG4 operates from a 5 V analog supply and a 1.8 V to 3.3 V digital supply. Both devices require careful supply decoupling and layout to achieve specified performance.

Are the ADS1271IBPWR and ADS1282IPWG4 pin-to-pin or functionally interchangeable?

No. They differ in package pin count, channel count, resolution, sample rate, and integrated features such as the PGA. They are not pin-to-pin compatible and cannot be treated as direct substitutes without full design validation against the respective datasheets.