ADS1281IPW
Техасские инструменты
- Lifecycle
- Active
- Stock
- 4383 ПКС
- Package
- TSSOP-24
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS1281IPW и ADS1232IPWG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS1281IPW and ADS1232IPWG4 are not drop-in replacements for one another. The ADS1281IPW is a single-channel, high-resolution delta-sigma ADC with a serial SPI interface in a TSSOP-28 package, while the ADS1232IPWG4 is a dual-channel, lower-resolution delta-sigma ADC with a two-wire serial interface in a TSSOP-24 package. Their differing channel count, resolution, interface type, and package footprint make them functionally incompatible for direct substitution without redesign.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1281IPW | ADS1232IPWG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 31 | 24 | Higher resolution enables finer measurement of small signal changes; the ADS1281 offers 7 more bits than the ADS1232. |
| Architecture | Delta-Sigma (2nd order) | Delta-Sigma | Architecture determines noise shaping and filter behavior; both are delta-sigma but differ in order and internal design. |
| Number of Input Channels | 1 (differential) | 2 (differential) | Channel count affects how many sensors can be connected; the ADS1232 supports two differential inputs versus one on the ADS1281. |
| Sampling Rate (max) | 4 kSPS | 80 SPS | Maximum output data rate determines bandwidth; the ADS1281 is far faster, suiting dynamic signals, while the ADS1232 targets slow precision measurements. |
| Interface | SPI | SPI | Both use SPI, so the digital host connection is compatible, though register maps and command sets differ. |
| Supply Voltage (analog) | 5 V (4.75 V to 5.25 V) | 5 V (2.7 V to 5.3 V) | Analog supply range affects compatibility with system rails; the ADS1232 tolerates a wider range including lower voltages. |
| Package | TSSOP-24 | TSSOP-24 | Same package footprint allows potential board-level drop-in, though pin functions must be verified. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +105°C | Temperature range affects suitability for harsh environments; the ADS1232 supports a higher upper limit. |
| PGA / Gain Stage | No integrated PGA | Integrated PGA (gain 1 to 128) | An integrated PGA allows direct connection of low-level sensors without external amplification; the ADS1281 lacks this feature. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1281IPW | ADS1232IPWG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 31 | 24 |
| Sampling Rate(Per Second) | 4k | 80 |
| Number of Inputs | 1 | 2 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | ADC | MUX-PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 2.7V ~ 5.3V |
| Voltage - Supply, Digital | 1.65V ~ 3.6V | 2.7V ~ 5.3V |
| Features | - | PGA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 105°C |
The ADS1281IPW is a single-channel, 31-bit delta-sigma ADC with a maximum data rate of 4 kSPS, designed for high-resolution seismic and energy exploration applications. The ADS1232IPWG4 is a dual-channel, 24-bit delta-sigma ADC with an integrated PGA and a maximum data rate of 80 SPS, intended for weigh scales and pressure sensors. They differ in resolution, channel count, data rate, and target application.
No. The ADS1281IPW is supplied in a 24-pin TSSOP (PW) package, while the ADS1232IPWG4 is supplied in a 24-pin TSSOP (PW) package as well, but the pin functions and internal architecture differ significantly. They are not direct drop-in replacements and require separate PCB layouts and firmware.
The ADS1281IPW supports a maximum data rate of 4 kSPS in its highest-speed mode. The ADS1232IPWG4 supports a maximum data rate of 80 SPS. The ADS1281IPW is therefore suitable for higher-bandwidth signal acquisition, while the ADS1232IPWG4 targets low-speed, high-precision measurement.
No. The ADS1232IPWG4 includes an integrated low-noise PGA with selectable gains of 1, 2, 64, and 128, which allows direct interfacing with low-level sensors such as load cells. The ADS1281IPW does not include an integrated PGA; it provides a differential input with a fixed gain architecture and relies on external signal conditioning for gain adjustment.
The ADS1281IPW is a single-channel, 31-bit delta-sigma ADC. The ADS1232IPWG4 is a dual-channel, 24-bit delta-sigma ADC. The ADS1281IPW offers higher bit resolution on a single channel, while the ADS1232IPWG4 provides two input channels at 24-bit resolution for multi-sensor designs.
The ADS1232IPWG4 is better suited for weigh-scale and bridge-sensor applications because it integrates a PGA with gains up to 128 and provides two differential input channels, enabling direct connection to load cells and bridge sensors without external amplification. The ADS1281IPW lacks an integrated PGA and is optimized for high-resolution seismic and energy exploration data acquisition.
The ADS1281IPW operates from an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 3.3 V, with a separate reference input. The ADS1232IPWG4 operates from a single 5 V analog supply (AVDD) and a 3.3 V digital supply (DVDD), and it includes an internal oscillator. Designers should verify exact supply ranges against the respective manufacturer datasheets before finalizing power designs.
Both devices provide an SPI-compatible serial interface, but their register maps, command sets, and data output formats differ. The ADS1281IPW uses a 24-bit or 32-bit data output with a specific synchronization and calibration command structure, while the ADS1232IPWG4 uses a simpler read-only data output with a DRDY/DOUT interface. Firmware written for one device cannot be reused directly for the other without modification.