ADS7809U vs ADS7811U

Это подробное сравнение ADS7809U и ADS7811U предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7809U and ADS7811U share the same 16-bit SAR ADC architecture, 5 V supply, and pin-compatible 28-pin SOIC footprint, making the ADS7811U a viable functional replacement candidate for the ADS7809U in most designs. Designers should validate the higher throughput and slightly reduced SNR against system requirements before final qualification.

Resolution and Architecture High match
Package and Pinout High match
Sampling Rate Validation required
Signal-to-Noise Ratio Validation required

Parts at a glance

Part A

ADS7809U

Техасские инструменты

Lifecycle
Active
Stock
6471 ПКС
Package
SOIC-20
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)
Part B

ADS7811U

Техасские инструменты

Lifecycle
Active
Stock
814 ПКС
Package
SOIC-28
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809U ADS7811U Why it matters
Resolution 16 bits 16 bits Both converters provide 16-bit resolution, so they offer the same nominal precision and are interchangeable in terms of quantization step size.
Sampling Rate 100 kSPS 250 kSPS The ADS7811U supports a higher throughput, which matters for faster signal acquisition; the ADS7809U may be insufficient for high-speed sampling applications.
Input Configuration Single-ended Pseudo-differential Input topology affects how signals are connected and common-mode rejection; pseudo-differential inputs can reject ground noise better than single-ended inputs.
Interface Type Serial (SPI/QSPI compatible) Parallel The digital interface determines microcontroller/FPGA pin requirements and firmware; serial vs parallel interfaces are not directly interchangeable without redesign.
Supply Voltage 5 V 5 V Both operate from a 5 V supply, so power rail requirements are compatible between the two parts.
Package 28-pin SOIC 28-pin SOIC Matching package and pin count simplifies board-level substitution, though pinout differences must still be verified.
Reference Internal reference Internal reference Both include an internal reference, reducing external component count and simplifying the analog front-end design.
Power Consumption Approximately 100 mW Approximately 155 mW Lower power dissipation in the ADS7809U benefits thermally constrained or battery-powered designs, while the ADS7811U trades power for speed.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809U ADS7811U
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Active
Number of Bits 16 16
Sampling Rate(Per Second) 100k 250k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V ±5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -25°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809U and ADS7811U?

The ADS7809U is a 16-bit successive-approximation ADC with a 10 µs conversion time and a 100 kHz sampling rate, while the ADS7811U is a 16-bit SAR ADC with a 5 µs conversion time and a 200 kHz sampling rate. Both are offered in a 28-pin SOIC package and operate from a +5 V supply, but the ADS7811U provides faster throughput and shorter conversion time.

Are the ADS7809U and ADS7811U pin-compatible?

Yes. Both devices are specified in the same 28-pin SOIC (DW) package with the same pinout, allowing the ADS7811U to be used as a drop-in replacement for the ADS7809U in existing PCB layouts, provided the faster timing and interface requirements are accommodated.

What is the resolution and architecture of each device?

Both the ADS7809U and ADS7811U are 16-bit successive-approximation register (SAR) analog-to-digital converters. They provide no missing codes over the full 16-bit range and are designed for high-accuracy industrial measurement applications.

What are the maximum sampling rates of the ADS7809U and ADS7811U?

The ADS7809U supports a maximum sampling rate of 100 kHz, while the ADS7811U supports a maximum sampling rate of 200 kHz. The higher rate of the ADS7811U results from its shorter 5 µs conversion time versus 10 µs for the ADS7809U.

Do both converters operate from a single +5 V supply?

Yes. Both the ADS7809U and ADS7811U operate from a single +5 V analog and digital supply. Each device includes an internal reference and a track-and-hold amplifier, reducing external component count.

What digital interface do the ADS7809U and ADS7811U provide?

Both devices provide a parallel 16-bit digital output interface with standard microprocessor-compatible control signals, including chip select, read, and convert start. The interface timing differs because of the different conversion times, so timing parameters must be verified against each device's datasheet.

Can the ADS7811U directly replace the ADS7809U in an existing design?

Because the two devices share the same 28-pin SOIC package and pinout, the ADS7811U can be a drop-in replacement in many designs. However, the system timing, clocking, and read-cycle margins must be revalidated against the ADS7811U datasheet to confirm compatibility with the faster conversion time.