Part A
ADS8344EB
Техасские инструменты
- Lifecycle
- Active
- Stock
- 6770 ПКС
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Replacement verdict
Not a drop-in replacement
The ADS8344EB and ADS830EG4 are not functionally interchangeable: the ADS8344EB is a 16-bit, 4-channel successive-approximation ADC with a serial SPI interface, while the ADS830EG4 is an 8-bit, single-channel pipelined ADC with a parallel output interface. They differ in resolution, channel count, output interface, and package, so substituting one for the other requires a full redesign of the surrounding circuitry and is not recommended as a direct replacement.
Different resolution
Different channel count
Different output interface
Different package
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8344EB | ADS830EG4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 8 bit | Resolution determines the smallest measurable signal change; a 16-bit ADC provides far finer quantization than an 8-bit ADC, so these parts are not functionally interchangeable in precision applications. |
| Sampling Rate | 200 kSPS | 60 MSPS | Maximum sampling rate defines the bandwidth of signals the converter can capture; the ADS830 is a high-speed pipeline ADC while the ADS8344 is a much slower precision SAR device. |
| Architecture | SAR | Pipeline | The ADC architecture affects latency, accuracy, and application suitability; SAR suits precision multichannel sensing while pipeline suits high-speed signal acquisition. |
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 1 (single-ended) | Channel count determines how many signals can be digitized without external multiplexing; the multichannel ADS8344 supports multiple sensors while the ADS830 handles a single input. |
| Input Interface / Configuration | Single-ended or differential, serial SPI/QSPI interface | Single-ended, parallel output | The digital interface and input topology must match the host system; serial SPI versus parallel output and single-ended versus differential inputs directly affect board design and compatibility. |
| Supply Voltage | 2.7 V to 5.25 V | 5 V (single supply) | Supply voltage compatibility determines whether the part can operate in a given system rail; the wide-range ADS8344 supports low-voltage designs while the ADS830 requires a 5 V rail. |
| Package | 20-pin SSOP | 20-pin SSOP | Package and pinout affect footprint and assembly; although both use a 20-pin SSOP, the pin functions differ, so a direct board drop-in is not possible. |
| Typical Application Focus | Precision multichannel data acquisition | High-speed signal digitization | The intended application domain indicates substitutability; a precision sensing ADC and a high-speed pipeline ADC serve fundamentally different roles in a system. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | ADS8344EB | ADS830EG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 8 |
| Sampling Rate(Per Second) | - | 60M |
| Number of Inputs | 4, 8 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | SAR | Pipelined |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Base Product Number | ADS8344 | - |
| Sampling Rate (Per Second) | 100k | - |
| Number of A / D Converters | 1 | - |
| Mounting Type | Surface Mount | - |
| Packaging | Bulk, Tube | - |
Frequently asked questions
What are the primary functional differences between the ADS8344EB and ADS830EG4?
The ADS8344EB is a 16-bit, 8-channel successive-approximation register (SAR) analog-to-digital converter (ADC) with a serial SPI/QSPI interface, operating from a single 2.7 V to 5.25 V supply. The ADS830EG4 is an 8-bit, 60 MSPS pipelined ADC with a parallel output interface, designed for high-speed signal digitization and typically operating from a 5 V supply. They differ fundamentally in resolution, architecture, channel count, interface type, and speed.
Can the ADS8344EB and ADS830EG4 be used interchangeably in the same circuit?
No. The two devices have incompatible resolutions (16-bit vs 8-bit), architectures (SAR vs pipelined), interfaces (serial vs parallel), package pinouts, and supply requirements. They are not pin-compatible or functionally interchangeable, and substitution would require a complete redesign of the surrounding circuitry, interface, and PCB layout.
What are the maximum sampling rates of the ADS8344EB and ADS830EG4?
The ADS8344EB supports a maximum throughput of 100 kSPS (kilo-samples per second) per its datasheet specifications. The ADS830EG4 supports a maximum sampling rate of 60 MSPS (mega-samples per second). The ADS830EG4 is therefore intended for high-speed applications, while the ADS8344EB targets precision, multi-channel, lower-speed measurement systems.
How do the input configurations differ between the ADS8344EB and ADS830EG4?
The ADS8344EB provides 8 single-ended inputs or 4 differential input pairs, selectable via its input multiplexer, with a 0 V to VREF input range. The ADS830EG4 provides a single differential or single-ended analog input with an internal reference and a 1 V peak-to-peak input range. The ADS8344EB is suited to multi-channel data acquisition, while the ADS830EG4 is optimized for digitizing a single high-speed signal.
What digital interfaces do the ADS8344EB and ADS830EG4 use?
The ADS8344EB uses a serial interface compatible with SPI, QSPI, and Microwire protocols, reducing pin count and simplifying isolation. The ADS830EG4 provides a parallel 8-bit CMOS-compatible output bus plus a clock input, which is necessary to sustain its 60 MSPS throughput. The interface choice directly affects the host controller or FPGA requirements for each device.
What are the supply voltage and power consumption characteristics of each device?
The ADS8344EB operates from a single supply of 2.7 V to 5.25 V and typically consumes approximately 1.5 mW at 5 V and 100 kSPS. The ADS830EG4 operates from a 5 V analog supply (with a separate digital supply) and typically dissipates approximately 300 mW at 60 MSPS. The ADS8344EB is optimized for low-power, portable instrumentation, whereas the ADS830EG4 targets high-speed systems where power is less constrained.
In which application areas is each converter typically used?
The ADS8344EB is typically used in multi-channel data acquisition systems, industrial process control, portable instrumentation, and battery-powered measurement equipment where precision and low power are critical. The ADS830EG4 is typically used in high-speed applications such as digital oscilloscopes, ultrasound front ends, video digitization, and communications receivers where sampling rate and bandwidth are the primary requirements.