ADS8509IDW
Техасские инструменты
- Lifecycle
- Active
- Stock
- 2404 ПКС
- Package
- SOIC-20
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS8509IDW и ADS8509IBDWG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS8509IDW and ADS8509IBDWG4 are functionally equivalent 16-bit SAR analog-to-digital converters sharing identical resolution, architecture, and package footprint, making the ADS8509IBDWG4 a viable replacement candidate for the ADS8509IDW. The primary distinction lies in the manufacturer's grade classification, which affects specified performance tolerances rather than core functionality; designers should confirm that the grade-specific accuracy and temperature specifications of the ADS8509IBDWG4 satisfy the target application requirements before substitution.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8509IDW | ADS8509IBDWG4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both converters provide the same 16-bit resolution, so measurement precision is equivalent. |
| Sampling Rate | 250 kSPS | 250 kSPS | Identical maximum throughput means either part supports the same signal bandwidth and timing budget. |
| Input Type | Single-ended | Single-ended | Same input configuration allows direct substitution without changing the analog front-end topology. |
| Supply Voltage | 5 V (analog and digital) | 5 V (analog and digital) | Matching supply requirements ensure the same power rail design can be reused. |
| Interface | SPI / serial | SPI / serial | Same serial interface means firmware and digital connections remain compatible. |
| Package / Mounting | SOIC-28 (surface mount) | SOIC-28 (surface mount) | Identical package and footprint allow drop-in board replacement without layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C (industrial grade) | The temperature grade suffix differs between the two orderable part numbers, which affects qualification and sourcing but not the rated range shown. |
| Orderable Part Number / Grade Suffix | ADS8509IDW | ADS8509IBDWG4 | Different orderable suffixes indicate distinct grade/qualification variants, which matters for BOM control and traceability even when electrical specs match. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8509IDW | ADS8509IBDWG4 |
|---|---|---|
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 250k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
Both devices are 16-bit successive-approximation analog-to-digital converters from Texas Instruments in a 28-pin SOIC (DW) package. The primary difference is the grade: the ADS8509IDW is specified for a maximum integral nonlinearity (INL) of ±3 LSB, while the ADS8509IBDWG4 is the higher-grade "B" version with a maximum INL of ±1.5 LSB. The "G4" suffix denotes lead-free (RoHS-compliant) construction, and both parts are functionally identical in pinout and operation.
Yes. Both parts are offered in the same 28-pin SOIC (DW) package with identical pin functions and PCB land patterns, so they are drop-in compatible from a mechanical and pinout standpoint. The difference is limited to the linearity grade and the lead-free G4 designation.
Both the ADS8509IDW and ADS8509IBDWG4 are 16-bit successive-approximation ADCs with a maximum sampling rate of 250 kSPS, as specified in the Texas Instruments datasheet.
The ADS8509 family supports a bipolar input range of ±10 V (with a 5 V reference) and includes an internal reference, a reference buffer, and a sample-and-hold amplifier. The input range and reference configuration are the same for both the IDW and IBDWG4 grades.
Both devices provide a parallel digital output interface with a 16-bit data bus, along with control signals for conversion start and read operations, as documented in the Texas Instruments datasheet. The interface is identical between the two grades.
Yes, in most designs the ADS8509IBDWG4 can directly replace the ADS8509IDW because they share the same package, pinout, resolution, sampling rate, and interface. The IBDWG4 offers tighter INL (±1.5 LSB vs ±3 LSB) and lead-free construction, so the substitution is generally acceptable, but the design should be validated against the target accuracy and RoHS requirements.
Both the ADS8509IDW and ADS8509IBDWG4 are specified over the industrial temperature range of −40°C to +85°C, per the Texas Instruments datasheet.
Both devices operate from a single 5 V analog supply (with an additional 5 V digital supply for the I/O interface), as specified in the Texas Instruments datasheet. The supply requirements are identical for both grades.