AFE5832LPZAV vs AFE5808ZCF

Это подробное сравнение AFE5832LPZAV и AFE5808ZCF предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AFE5832LPZAV and AFE5808ZCF are not drop-in replacements for one another. The AFE5832LPZAV is a 32-channel ultrasound analog front end in a 289-ball NFBGA package, while the AFE5808ZCF is an 8-channel device in a 135-ball NFBGA package, so channel count, package footprint, and pinout differ fundamentally. Designers must validate board layout, channel architecture, and system-level signal-chain requirements before considering either device in an existing AFE5808ZCF or AFE5832LPZAV design.

Different channel count Different package footprint Different pinout Board redesign required

Parts at a glance

Part A

AFE5832LPZAV

Техасские инструменты

Lifecycle
Active
Stock
6726 ПКС
Package
NFBGA-289
Series
Сбор данных - аналоговый фронт-энд (AFE)
Part B

AFE5808ZCF

Техасские инструменты

Lifecycle
Active
Stock
357 ПКС
Package
BGA-135
Series
Сбор данных - аналоговый фронт-энд (AFE)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AFE5832LPZAV AFE5808ZCF Why it matters
Number of Channels 32 8 Channel count determines how many transducer elements can be processed simultaneously, directly affecting imaging system architecture and channel-count compatibility.
ADC Resolution 12 bit 12 bit ADC bit depth sets the dynamic range and quantization noise floor of the receive path, influencing image contrast and small-signal detection.
Maximum ADC Sampling Rate 40 MSPS 65 MSPS Sampling rate limits the achievable imaging depth and axial resolution; a lower rate constrains high-frequency and deep-imaging performance.
LNA Input-Referred Noise 0.8 nV/√Hz 0.75 nV/√Hz Low-noise amplifier noise floor governs the minimum detectable echo signal and overall receive sensitivity of the ultrasound front end.
Total Power Consumption Approximately 1.1 W Approximately 0.9 W Power dissipation affects thermal design, battery life in portable systems, and channel-density scaling in multi-channel probes.
Package Type 144-pin TQFP (PZAV) 100-ball BGA (ZCF) Package footprint and pinout determine PCB layout, assembly process, and mechanical compatibility with existing board designs.
Continuous Wave (CW) Doppler Support Integrated CW mixer Integrated CW mixer On-chip CW Doppler capability enables blood-flow velocity measurement without external mixing circuitry, affecting system cost and board area.
Digital Interface LVDS serial output LVDS serial output The output interface determines the FPGA/ASIC receiver requirements and the achievable data throughput per channel.
Programmable Gain Range (TGC) Up to 45 dB Up to 45 dB Time-gain compensation range sets the ability to equalize echo amplitudes across depth, impacting image uniformity.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AFE5832LPZAV AFE5808ZCF
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Active
Number of Bits 10, 12 12, 14
Number of Channels 32 8
Power (Watts) - 158 mW
Voltage - Supply, Analog - 1.7V ~ 1.9V, 3.15V ~ 3.6V, 5V
Voltage - Supply, Digital - 1.7V ~ 1.9V
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AFE5832LPZAV and AFE5808ZCF?

The AFE5832LPZAV is a Texas Instruments 32-channel low-power analog front end (AFE) for ultrasound, packaged in a 289-ball NFBGA (ZAV). The AFE5808ZCF is a Texas Instruments 8-channel ultrasound AFE with continuous wave (CW) Doppler capability, packaged in a 100-ball NFBGA (ZCF). Both integrate a low-noise amplifier, VGA, anti-aliasing filter, and 12-bit ADC.

How do the channel counts of the AFE5832LPZAV and AFE5808ZCF compare?

The AFE5832LPZAV integrates 32 receive channels, while the AFE5808ZCF integrates 8 receive channels. The AFE5832LPZAV therefore offers four times the channel density per device, which can reduce the number of AFE packages required in high-channel-count ultrasound systems.

Do both devices include continuous wave (CW) Doppler support?

No. The AFE5808ZCF includes an integrated continuous wave (CW) Doppler mixer per channel, making it suited to systems requiring CW Doppler processing. The AFE5832LPZAV is a low-power AFE focused on B-mode and related imaging paths and does not integrate the same per-channel CW Doppler mixer block.

How do the power consumption profiles of the two AFEs differ?

The AFE5832LPZAV is designed as a low-power 32-channel AFE, targeting reduced per-channel power in dense ultrasound receive arrays. The AFE5808ZCF is an 8-channel AFE whose per-channel power includes the CW Doppler mixer. Because power scales with channel count and enabled blocks, system-level power must be evaluated per configuration using the respective datasheets rather than by direct per-device comparison.

Are the AFE5832LPZAV and AFE5808ZCF pin or package compatible?

No. The AFE5832LPZAV uses a 289-ball NFBGA (ZAV) package, while the AFE5808ZCF uses a 100-ball NFBGA (ZCF) package. The ball counts, package dimensions, and pin assignments differ, so the two devices are not drop-in replacements and require different PCB footprints and layouts.

What is the ADC resolution and typical sample rate of these AFEs?

Both the AFE5832LPZAV and AFE5808ZCF integrate 12-bit analog-to-digital converters. The AFE5808ZCF supports sampling rates up to 65 MSPS per channel as specified in its datasheet. Designers should confirm the exact maximum sample rate and timing for the AFE5832LPZAV in its datasheet, as the two devices target different channel-count and power trade-offs.

Which device is better suited to a high-channel-count ultrasound system?

The AFE5832LPZAV is generally better suited to high-channel-count systems because it integrates 32 channels per package, reducing board area and device count. The AFE5808ZCF, with 8 channels plus integrated CW Doppler mixers, is better suited to systems where CW Doppler capability and lower channel count per device are acceptable or preferred.

Can the AFE5808ZCF be used as a substitute for the AFE5832LPZAV in an existing design?

No, not as a direct substitute. The devices differ in channel count (8 vs 32), package and pinout (100-ball ZCF vs 289-ball ZAV), and CW Doppler integration. Any substitution would require a redesign of the receive chain, PCB footprint, and system architecture, followed by validation against the target design requirements.