AFE58JD28ZAV
Техасские инструменты
- Lifecycle
- Active
- Stock
- 7063 ПКС
- Package
- NFBGA-289
- Series
- Сбор данных - аналоговый фронт-энд (AFE)
Это подробное сравнение AFE58JD28ZAV и AFE58JD32LPZAV предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The AFE58JD28ZAV and AFE58JD32LPZAV are both 32-channel ultrasound analog front ends from Texas Instruments sharing the same ZAV package and core architecture, but they differ in power consumption profile, VCA gain range, and demodulation capabilities. The AFE58JD32LPZAV is a lower-power variant with a reduced VCA gain range and no digital demodulator, while the AFE58JD28ZAV offers a wider gain range and integrated demodulation. Designers should validate power budget, signal chain gain requirements, and demodulation needs before substituting one for the other.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE58JD28ZAV | AFE58JD32LPZAV | Why it matters |
|---|---|---|---|
| Number of Channels | 8 | 32 | Channel count determines how many transducer elements or signal paths the AFE can support; a 32-channel device covers four times the channels of an 8-channel device, directly affecting system architecture and substitutability. |
| Analog Supply Voltage (AVDD) | 1.8 V / 3.3 V | 1.8 V / 3.3 V | Supply rails must match the board power design; identical analog supply requirements simplify power-tree reuse when swapping devices. |
| Power Consumption per Channel | Higher (standard power mode) | Lower (low-power LP variant) | The LP suffix indicates a reduced-power design; lower per-channel power affects thermal budget, battery life, and portable ultrasound feasibility. |
| Package Type | NFBGA (ZAV) | NFBGA (ZAV) | Package footprint and ballout determine PCB layout compatibility; matching package family aids mechanical and routing reuse. |
| JESD204B Interface Lanes | JESD204B serial output | JESD204B serial output | Both use JESD204B high-speed serial output, so the digital backend and FPGA interface can be reused across designs. |
| Integrated CW Doppler Support | Yes | Yes | Continuous-wave Doppler capability is essential for blood-flow measurement in ultrasound systems; both devices support it, preserving functional equivalence. |
| Digital Demodulation / Decimation | Integrated digital processing | Integrated digital processing | On-chip demodulation and decimation reduce FPGA load and data rate; both integrating it means similar digital backend requirements. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Industrial temperature range suitability affects use in medical and industrial environments; matching ranges support drop-in substitution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE58JD28ZAV | AFE58JD32LPZAV |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 12, 14 | 10, 12 |
| Number of Channels | 16 | 32 |
| Power (Watts) | 64 mW | 18.5 mW |
| Mounting Type | Surface Mount | Surface Mount |
| Voltage - Supply, Analog | 3.15V ~ 3.6V | - |
Both are integrated analog front-end (AFE) devices from Texas Instruments intended for ultrasound and medical imaging signal chains. The AFE58JD28ZAV is an 8-channel AFE with a 14-bit ADC and JESD204B serial output, while the AFE58JD32LPZAV is a 32-channel low-power AFE with a 12-bit ADC and LVDS serial output.
The AFE58JD28ZAV integrates 8 receive channels, whereas the AFE58JD32LPZAV integrates 32 receive channels, making the latter suited to higher-channel-count ultrasound system architectures.
The AFE58JD28ZAV uses a 14-bit analog-to-digital converter per channel, while the AFE58JD32LPZAV uses a 12-bit ADC per channel. The higher resolution of the AFE58JD28ZAV supports greater dynamic range, while the 12-bit AFE58JD32LPZAV targets lower power and higher channel density.
The AFE58JD28ZAV provides a JESD204B serial output interface, which reduces board routing compared with parallel or LVDS interfaces. The AFE58JD32LPZAV provides an LVDS serial output interface for its 32 channels.
No. The two devices differ in channel count, ADC resolution, output interface, and package, so they are not direct drop-in replacements. A design migration requires revalidating the package footprint, pin functions, power supplies, and digital interface against the respective TI datasheets.
The AFE58JD32LPZAV is the low-power (LP) variant with 32 channels and a 12-bit ADC, making it the more appropriate choice when channel density and power consumption are the primary constraints. The AFE58JD28ZAV is oriented toward 8-channel designs requiring 14-bit resolution and a JESD204B output.
They can serve different roles within an ultrasound signal chain, but they are not interchangeable at the same board position. The AFE58JD28ZAV offers 8 channels with 14-bit resolution and JESD204B output, while the AFE58JD32LPZAV offers 32 channels with 12-bit resolution and LVDS output, so system partitioning, FPGA interface, and power budget must be designed accordingly.
Authoritative parameters, including channel count, ADC resolution, output interface, package, and power specifications, should be taken from the official Texas Instruments product datasheets and confirmed against distributor listings such as DigiKey, Mouser, or TTI before design or substitution decisions.