PC28F128J3F75A vs PC28F00AG18FF TR

Это подробное сравнение PC28F128J3F75A и PC28F00AG18FF TR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The PC28F128J3F75A and PC28F00AG18FF TR are not drop-in replacements for one another. They differ fundamentally in memory architecture, density, interface voltage, and package configuration, so substituting one for the other would require a complete board redesign and firmware rework rather than a simple part swap.

Different memory technology Different memory density Different interface voltage Different package and pinout

Parts at a glance

Part A

PC28F128J3F75A

Компания Alliance Memory, Inc.

Lifecycle
Active
Stock
3538 ПКС
Series
Память - Память
Part B

PC28F00AG18FF TR

Компания Micron Technology Inc.

Lifecycle
Active
Stock
8406 ПКС
Package
TBGA-64
Series
Память

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter PC28F128J3F75A PC28F00AG18FF TR Why it matters
Memory Density 128 Mbit 1 Gbit Density determines total storage capacity; a 1 Gbit device holds eight times the data of a 128 Mbit device, so they are not drop-in substitutes for firmware or code storage.
Memory Organization 8 Mbit x 16 (word-wide) 64 Mbit x 16 (word-wide) Organization defines the data bus width and addressable word count, affecting how the host controller addresses and accesses the array.
Supply Voltage 3.0 V to 3.6 V 1.7 V to 2.0 V Core and I/O voltage must match the system rail; a 3 V part cannot be substituted into a 1.8 V design without level shifting or a different power supply.
Interface Type Parallel (asynchronous) Parallel (synchronous burst) Asynchronous versus synchronous interfaces require different controller timing and clocking, so the host must support the specific protocol.
Access Time 75 ns 110 ns (initial access) Access time governs read latency; slower initial access can violate timing budgets in code-execution (XiP) applications.
Package / Case 56-TSOP 64-BGA Footprint and pinout must match the PCB land pattern; different packages are not physically interchangeable without a board redesign.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range confirms suitability for industrial versus commercial environments; matching ranges indicate comparable environmental robustness.
Architecture / Cell Type NOR flash (Intel StrataFlash) NOR flash (Intel StrataFlash) Both are NOR flash, which supports random access and code execution, unlike NAND; this preserves functional behavior for XiP use cases.
Product Status Obsolete / not recommended for new designs Active Lifecycle status affects long-term availability and sourcing; an obsolete part may require redesign or last-time-buy planning.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification PC28F128J3F75A PC28F00AG18FF TR
Series - StrataFlash™
Part Status Obsolete Obsolete
Memory Type Non-Volatile Non-Volatile
Memory Format FLASH FLASH
Technology FLASH - NOR FLASH - NOR
Memory Size 128Mbit 1Gb (64M x 16)
Memory Interface Parallel Parallel
Clock Frequency - 133 MHz
Write Cycle Time - Word Page - 96ns
Access Time 75 ns 96 ns
Voltage - Supply 2.7V ~ 3.6V 1.7V ~ 2V
Operating Temperature -40°C ~ 85°C (TA) -30°C ~ 85°C (TC)
Mounting Type Surface Mount Surface Mount
Base Product Number PC28F128 -
Digi Key Programmable Not Verified -
Memory Organization 16M x 8, 8M x 16 -
Write Cycle Time - Word, Page 75ns -
Packaging Tray -

Frequently asked questions

What are the key differences between the PC28F128J3F75A and the PC28F00AG18FF TR?

The PC28F128J3F75A is a 128 Mbit (16 MByte) Intel StrataFlash embedded memory device in a 56-pin TSOP package, while the PC28F00AG18FF TR is a 1 Gbit (128 MByte) Micron StrataFlash embedded memory device in a 64-ball BGA package. They differ in density, package, pinout, voltage range, and interface timing, so they are not pin-to-pin or function-to-function equivalent.

Are the PC28F128J3F75A and PC28F00AG18FF TR pin-to-pin compatible?

No. The PC28F128J3F75A uses a 56-pin TSOP package, while the PC28F00AG18FF TR uses a 64-ball BGA package. The package types, ball/pin counts, and land patterns are different, so they cannot be interchanged without a PCB redesign.

Do both devices operate at the same supply voltage?

No. The PC28F128J3F75A operates with a VCC core supply of 2.7 V to 3.6 V and a VCCQ I/O supply of 1.65 V to 3.6 V. The PC28F00AG18FF TR operates with a VCC core supply of 1.7 V to 2.0 V and a VCCQ I/O supply of 1.7 V to 3.6 V. The core voltage ranges are not compatible, so level shifting or a different power rail would be required.

What is the difference in memory density between these two parts?

The PC28F128J3F75A has a density of 128 Mbit (16 MByte), organized as 8 Mbit x 16. The PC28F00AG18FF TR has a density of 1 Gbit (128 MByte), organized as 64 Mbit x 16. The PC28F00AG18FF TR provides eight times the storage capacity of the PC28F128J3F75A.

Can the PC28F00AG18FF TR be used as a drop-in replacement for the PC28F128J3F75A?

No. Due to differences in package type, pin count, supply voltage, density, and command set architecture, the PC28F00AG18FF TR cannot be used as a drop-in replacement for the PC28F128J3F75A. A redesign of the PCB, power supply, and firmware would be necessary.

What are the operating temperature ranges for these devices?

The PC28F128J3F75A is specified for operation over the industrial temperature range of -40°C to +85°C. The PC28F00AG18FF TR is specified for operation over the industrial temperature range of -40°C to +85°C. Both devices support the same industrial temperature range.

What is the access time of the PC28F128J3F75A compared to the PC28F00AG18FF TR?

The PC28F128J3F75A has a maximum access time of 75 ns. The PC28F00AG18FF TR has a maximum access time of 110 ns. The PC28F128J3F75A provides faster random access timing than the PC28F00AG18FF TR.

Are both devices manufactured by the same company?

No. The PC28F128J3F75A was originally manufactured by Intel and is now part of Micron's StrataFlash portfolio. The PC28F00AG18FF TR is manufactured by Micron. Both are now part of Micron's product line, but they originate from different generations of StrataFlash technology.