Изображения являются только для ссылки
ATTINY13V-10SU
+БОМIC MCU 8BIT 1KB FLASH 8SOIC
-
ПроизводительТехнология микрочипов
-
Мфр. Часть #ATTINY13V-10SU
-
В наличии2958
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Supplier | Microchip Technology |
| Package | Tube |
| Series | AVR® ATtiny |
| ProductStatus | Active |
| CoreProcessor | AVR |
| CoreSize | 8-Bit |
| Speed | 10MHz |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| NumberofI/O | 6 |
| ProgramMemorySize | 1KB (512 x 16) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 64 x 8 |
| RAMSize | 64 x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.8V ~ 5.5V |
| DataConverters | A/D 4x10b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
Обзор
Description
Introduction to ATtiny13V-10SU
- Small 8-bit AVR microcontroller in an 8-pin SOIC package (SU) from the TinyAVR family.
- Suitable for simple, low-power embedded tasks with a compact footprint.
- Memory: about 1 KB flash, 64 bytes RAM, 64 bytes EEPROM.
- Voltage and speed: operates from ~1.8 to 5.5 V; up to ~10 MHz clock (speed grade -10).
- Peripherals: one timer/counter with PWM, watchdog timer, ADC and analog comparator, USI for SPI/I2C-like serial, multiple I/O pins with interrupts, and sleep modes for power saving.
- Programming: SPI-programmable; supported by AVR-GCC, avrdude, and Microchip Studio.
- Typical uses: small control loops, battery-powered sensors, LED drivers, compact interfaces.
- Note: no USB, limited memory and peripherals—ideal for tiny, budget-constrained projects. For exact pinout and timing, see the official datasheet.
- Small 8-bit AVR microcontroller in an 8-pin SOIC package (SU) from the TinyAVR family.
- Suitable for simple, low-power embedded tasks with a compact footprint.
- Memory: about 1 KB flash, 64 bytes RAM, 64 bytes EEPROM.
- Voltage and speed: operates from ~1.8 to 5.5 V; up to ~10 MHz clock (speed grade -10).
- Peripherals: one timer/counter with PWM, watchdog timer, ADC and analog comparator, USI for SPI/I2C-like serial, multiple I/O pins with interrupts, and sleep modes for power saving.
- Programming: SPI-programmable; supported by AVR-GCC, avrdude, and Microchip Studio.
- Typical uses: small control loops, battery-powered sensors, LED drivers, compact interfaces.
- Note: no USB, limited memory and peripherals—ideal for tiny, budget-constrained projects. For exact pinout and timing, see the official datasheet.
Equivalent
Direct drop-in equivalents are other members of the AVR ATtiny13 family: ATtiny13V-10SU, ATtiny13A-10SU, and ATtiny13-10SU. They share 1 KB flash, 64 B RAM, eight pins and up to 10 MHz operation. The voltage ranges differ: V variant 1.8–5.5 V; standard/non‑V variants typically 2.7–5.5 V.
Features
ATtiny13V-10SU is an 8-bit AVR microcontroller in an 8-pin SOIC. Key features:
- 1 KB flash program memory; 64 bytes RAM; 64 bytes EEPROM
- 4-channel 10-bit ADC
- 1 × 8-bit Timer/Counter0 (peripherals for timing/PWM)
- USI serial interface (two-wire) for I²C/SPI compatibility
- 6 I/O pins (PB0–PB5) usable in the 8-pin package
- Operating voltage: 1.8–5.5 V (V-variant) with wide supply range
- Internal oscillator up to 9.6 MHz; external clock option
- Sleep modes and power-saving features
- Watchdog Timer and Brown-out Detection
- In-System Programming (ISP) via SPI/SCK/MOSI/MISO; Reset pin for programming
- Small, low-power design suited for simple control tasks
Note: Exact feature counts (e.g., PWM specifics, timer extras) are per-device, but these are the core capabilities of the ATtiny13V-10SU family.
- 1 KB flash program memory; 64 bytes RAM; 64 bytes EEPROM
- 4-channel 10-bit ADC
- 1 × 8-bit Timer/Counter0 (peripherals for timing/PWM)
- USI serial interface (two-wire) for I²C/SPI compatibility
- 6 I/O pins (PB0–PB5) usable in the 8-pin package
- Operating voltage: 1.8–5.5 V (V-variant) with wide supply range
- Internal oscillator up to 9.6 MHz; external clock option
- Sleep modes and power-saving features
- Watchdog Timer and Brown-out Detection
- In-System Programming (ISP) via SPI/SCK/MOSI/MISO; Reset pin for programming
- Small, low-power design suited for simple control tasks
Note: Exact feature counts (e.g., PWM specifics, timer extras) are per-device, but these are the core capabilities of the ATtiny13V-10SU family.
Pinout
8 pins (SOIC-8). It’s an 8‑bit AVR microcontroller (ATtiny13V) in an SOIC-8 package, with 1 KB flash, 64 B EEPROM, 64 B SRAM, operating up to 10 MHz, and supply voltage range 1.8–5.5 V.
Manufacturer
- Manufacturer: Microchip Technology (the ATTINY13V-10SU was originally from Atmel, which Microchip acquired in 2016).
- What kind of company: A global semiconductor company that designs and manufactures microcontrollers, memory, and analog devices.
- What kind of company: A global semiconductor company that designs and manufactures microcontrollers, memory, and analog devices.
Application
ATtiny13V-10SU is ideal for small, low-power embedded roles. Common application areas:
- Battery-powered, low-power controllers
- Small sensor interfaces (ADC readings: temp, light, etc.)
- Simple control loops and PWM for LEDs or tiny motors
- Debounced switches and compact user interfaces (buttons, keypad)
- Timers, alarms, and interval data-logging tasks
- Remote controls, toys, and compact home automation devices
- Tiny data loggers and counters (limited flash)
- Hobbyist prototyping (Arduino TinyCore, small projects)
- Battery-powered, low-power controllers
- Small sensor interfaces (ADC readings: temp, light, etc.)
- Simple control loops and PWM for LEDs or tiny motors
- Debounced switches and compact user interfaces (buttons, keypad)
- Timers, alarms, and interval data-logging tasks
- Remote controls, toys, and compact home automation devices
- Tiny data loggers and counters (limited flash)
- Hobbyist prototyping (Arduino TinyCore, small projects)
Package
It comes in an 8-pin SOIC (Small Outline Integrated Circuit) package.
