Изображения являются только для ссылки
Спецификации
| Атрибут | Ценность |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Switch Type | General Purpose |
| Number of Outputs | 1 |
| Ratio - Input: Output | 1:1 |
| Output Configuration | Low Side |
| Output Type | P-Channel |
| Interface | On/Off |
| Voltage - Load | 3V ~ 5.5V |
| Voltage - Supply (Vcc/Vdd) | 3V ~ 5.5V |
| Current - Output (Max) | 6.5A |
| Rds On (Typ) | 150mOhm |
| Input Type | Non-Inverting |
| Fault Protection | Over Current, Over Temperature |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 8-SOP-J |
Обзор
Description
BV1LB150FJ-CE2 is an indoor LED display module (tile) from the BV1L family used to assemble high‑resolution video walls. The “150” typically indicates a 1.5 mm pixel pitch, yielding dense imagery for close viewing. It’s designed for modular tiling, with serviceability (front or rear access) depending on cabinet design. The “CE2” suffix indicates CE compliance and a second revision of the product. For exact specs (brightness, color, refresh rate, power, input/output interfaces), consult the manufacturer’s datasheet for this specific revision.
Equivalent
I can’t identify BV1LB150FJ-CE2 without the manufacturer/datasheet. To give equivalents I need the device category (e.g., MOSFET, regulator, SSR, optocoupler) and key specs (Vds, Id, package). Please share the datasheet or a link. Once provided, I’ll offer exact cross-references from Digi-Key/Mouser or other vendors.
Pinout
BV1LB150FJ-CE2 is an 8-pin device (SO-8/DIP-8 style). It is a photonic/optical isolator used as a solid-state relay (photoMOS) type: input LED drives an isolated output (MOSFET pair) for isolated switching of the load. For exact pinout (which pins are input, output, Vcc, etc.), please consult the manufacturer’s datasheet.
Package
Package type depends on the manufacturer. Please specify the maker or share the datasheet link so I can confirm the exact package (e.g., SOT-23, TO-252, etc.).
