Изображения являются только для ссылки
DG413DY
+БОМIC SWITCH QUAD SPST 16-SOIC
-
ПроизводительVishay Силиконикс
-
Мфр. Часть #DG413DY
-
В наличии7074
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Supplier | Vishay Siliconix |
| Package | Tube |
| ProductStatus | Obsolete |
| SwitchCircuit | SPST - NO/NC |
| Multiplexer/DemultiplexerCircuit | 1:1 |
| NumberofCircuits | 4 |
| On-StateResistance(Max) | 35Ohm |
| Voltage-SupplySingle(V+) | 5V ~ 44V |
| Voltage-SupplyDual(V±) | ±5V ~ 20V |
| SwitchTime(TonToff)(Max) | 175ns, 145ns |
| ChargeInjection | 5pC |
| ChannelCapacitance(CS(off)CD(off)) | 9pF, 9pF |
| Current-Leakage(IS(off))(Max) | 250pA |
| Crosstalk | -85dB @ 1MHz |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 16-SOIC (0.154, 3.90mm Width) |
Обзор
Description
DG413DY is part of the DG413 family of CMOS analog switches. It is an 8‑pin device that provides dual bilateral (analog) switching controlled by a digital input. When a channel is closed, it passes the analog signal with low on‑resistance; when open, the signal is blocked with very low leakage. The part supports a broad supply range and CMOS/TTL‑level control, making it suitable for signal routing, multiplexing, and sample‑and‑hold or data‑acquisition front‑ends. The “DY” suffix usually indicates a specific package/date code variant. For exact pinout, control logic, on‑resistance, leakage, and voltage range, consult the manufacturer’s DG413DY datasheet.
Equivalent
Equivalent parts depend on the manufacturer and device function (analog switch type, number of channels, package, Vcc, etc.). Please specify the vendor (e.g., Vishay, Analog Devices, TI) or share the datasheet. With that, I can give exact cross-reference part numbers.
Features
DG413DY is a DG413 family analog switch/multiplexer device. Typical features (vendor variations apply) include:
- Dual (multi-channel) analog switch/multiplexer topology for routing analog signals
- Low on-resistance and low distortion in the routed path
- Very low off leakage and high isolation when switched off
- Wide supply voltage range (single or dual supply, compatible with standard logic levels)
- Break-before-make switching to prevent shorted paths
- TTL/CMOS-compatible control inputs
- Bidirectional signal path with rail-to-rail analog range up to the supply rails
- Over-voltage protection on inputs/outputs
- Available in DY packaging variants (e.g., DIP/SOIC) with typical industrial temperature range
Note: exact electrical specs (RON, leakage, Vcc range, temperature, pinout) vary by manufacturer and specific variant. Please provide the manufacturer or datasheet for precise figures.
- Dual (multi-channel) analog switch/multiplexer topology for routing analog signals
- Low on-resistance and low distortion in the routed path
- Very low off leakage and high isolation when switched off
- Wide supply voltage range (single or dual supply, compatible with standard logic levels)
- Break-before-make switching to prevent shorted paths
- TTL/CMOS-compatible control inputs
- Bidirectional signal path with rail-to-rail analog range up to the supply rails
- Over-voltage protection on inputs/outputs
- Available in DY packaging variants (e.g., DIP/SOIC) with typical industrial temperature range
Note: exact electrical specs (RON, leakage, Vcc range, temperature, pinout) vary by manufacturer and specific variant. Please provide the manufacturer or datasheet for precise figures.
Pinout
- Pin count: 16 pins (16-pin package such as SOP-16/DIL-16)
- Function: DG413DY is a dual analog switch (two independent SPST-style analog switches) controlled by a digital input, used to route analog signals (i.e., a dual analog multiplexer/demultiplexer).
- Function: DG413DY is a dual analog switch (two independent SPST-style analog switches) controlled by a digital input, used to route analog signals (i.e., a dual analog multiplexer/demultiplexer).
Manufacturer
Manufacturer: Intersil (the DG413DY part is from Intersil, which is now part of Renesas Electronics).
What kind of company: A semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits.
What kind of company: A semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits.
Application
DG413DY is a dual analog switch used to route analog signals. Typical applications:
- Signal multiplexing in data acquisition and instrumentation
- Front-end switching for ADCs/DACs and sample-and-hold stages
- Audio/video routing and switching matrices
- Replacing mechanical relays in automated test equipment
- Programmable signal-path matrices and gain/attenuation networks
- Sensor conditioning in automotive and industrial systems
- Portable/low-power instrumentation and measurement circuits
- Signal multiplexing in data acquisition and instrumentation
- Front-end switching for ADCs/DACs and sample-and-hold stages
- Audio/video routing and switching matrices
- Replacing mechanical relays in automated test equipment
- Programmable signal-path matrices and gain/attenuation networks
- Sensor conditioning in automotive and industrial systems
- Portable/low-power instrumentation and measurement circuits
Package
DG413DY is an 8-pin small-outline package (SOIC-8).
