Изображения являются только для ссылки
Спецификации
| Атрибут | Ценность |
| Package / Case | Tray |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 512Mb (64M x 8) |
| Memory Interface | SPI - Quad I/O, QPI, DTR |
| Clock Frequency | 133 MHz |
| Write Cycle Time - Word Page | 1.6ms |
| Voltage - Supply | 2.3V ~ 3.6V |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Mounting Type | Surface Mount |
Обзор
Description
IS25LP512M-RHLE is a 512-Mbit serial NOR flash memory from ISSI used for code and data storage. It provides high-density nonvolatile storage with an SPI interface and supports high-speed modes (single, dual I/O, quad I/O, and QPI where available) for faster reads.
Key points:
- Capacity and interface: 512 Mbit, SPI with multi‑I/O options
- Voltage and performance: 2.7–3.6 V supply; fast reads (up to high-speed clocks in supported modes)
- Memory organization: 4 KB sectors, 64 KB blocks; 256-byte page program; whole-chip erase
- Endurance and retention: typical 100k–1M erase cycles; 20-year data retention
- Power and security: power-down modes; write protection, status register, and security features
- Packaging note: RHLE suffix denotes a specific package/temperature grade; check the datasheet for exact package and timing
Typical applications: firmware/code storage and boot memory for microcontrollers and embedded systems.
Key points:
- Capacity and interface: 512 Mbit, SPI with multi‑I/O options
- Voltage and performance: 2.7–3.6 V supply; fast reads (up to high-speed clocks in supported modes)
- Memory organization: 4 KB sectors, 64 KB blocks; 256-byte page program; whole-chip erase
- Endurance and retention: typical 100k–1M erase cycles; 20-year data retention
- Power and security: power-down modes; write protection, status register, and security features
- Packaging note: RHLE suffix denotes a specific package/temperature grade; check the datasheet for exact package and timing
Typical applications: firmware/code storage and boot memory for microcontrollers and embedded systems.
Equivalent
Equivalent 512 Mbit SPI NOR flash parts from other vendors:
- Macronix MX25L51245G
- Winbond W25Q512JV (and W25Q512FV)
- GigaDevice GD25Q512B
- Spansion S25FL512S
Note: check voltage, package, and timing to ensure true compatibility; some cross-references may require minor changes.
- Macronix MX25L51245G
- Winbond W25Q512JV (and W25Q512FV)
- GigaDevice GD25Q512B
- Spansion S25FL512S
Note: check voltage, package, and timing to ensure true compatibility; some cross-references may require minor changes.
Features
Key features of IS25LP512M-RHLE (concise):
- 512 Mbit serial flash memory
- SPI-compatible interface with Dual/Quad I/O (QPI) modes
- Operation voltage: 2.7–3.6 V
- Read throughput: fast read with dummy cycles; up to 133 MHz in QPI (SPI typically 80–104 MHz)
- Memory organization: 256-byte pages; 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Low-power modes: deep power-down and standby
- Endurance and retention: ~100k P/E cycles; data retention ~20 years
- Temperature: extended operating range −40°C to +105°C
- RoHS-compliant; suitable for lead-free packages
Note: exact timing, voltage, and packaging options can vary by revision/lot—consult the datasheet for precise parameters.
- 512 Mbit serial flash memory
- SPI-compatible interface with Dual/Quad I/O (QPI) modes
- Operation voltage: 2.7–3.6 V
- Read throughput: fast read with dummy cycles; up to 133 MHz in QPI (SPI typically 80–104 MHz)
- Memory organization: 256-byte pages; 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Low-power modes: deep power-down and standby
- Endurance and retention: ~100k P/E cycles; data retention ~20 years
- Temperature: extended operating range −40°C to +105°C
- RoHS-compliant; suitable for lead-free packages
Note: exact timing, voltage, and packaging options can vary by revision/lot—consult the datasheet for precise parameters.
Pinout
- Pin count: 8 pins in the RHLE package (8‑pin surface-mount).
- Function: 512 Mbit serial SPI flash memory used for non-volatile storage of code/data (pins include CS, CLK, DI, DO, VCC, GND, WP, and HOLD).
- Function: 512 Mbit serial SPI flash memory used for non-volatile storage of code/data (pins include CS, CLK, DI, DO, VCC, GND, WP, and HOLD).
Manufacturer
- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- Company type: A fabless semiconductor company that designs and markets memory ICs (e.g., NOR Flash, DRAM) and outsources manufacturing to external foundries.
- Company type: A fabless semiconductor company that designs and markets memory ICs (e.g., NOR Flash, DRAM) and outsources manufacturing to external foundries.
Application
IS25LP512M-RHLE is a 512-Mbit serial NOR flash (SPI) with fast reads and dual/quad I/O support, suitable for firmware storage and code execution in embedded systems.
Common applications:
- Boot memory and program storage for MCUs/SoCs
- Firmware storage and OTA/update buffers for embedded devices
- Automotive and industrial electronics (wide-temp, reliable flash)
- Consumer electronics (set-top boxes, TVs, audio devices, wearables)
- Networking/communications gear (routers, gateways, modems)
- IoT and smart devices (sensors, meters, home appliances)
- Data logging and scratchpad storage in embedded systems
Common applications:
- Boot memory and program storage for MCUs/SoCs
- Firmware storage and OTA/update buffers for embedded devices
- Automotive and industrial electronics (wide-temp, reliable flash)
- Consumer electronics (set-top boxes, TVs, audio devices, wearables)
- Networking/communications gear (routers, gateways, modems)
- IoT and smart devices (sensors, meters, home appliances)
- Data logging and scratchpad storage in embedded systems
Package
IS25LP512M-RHLE uses an 8-pin SOIC (SOP-8) surface-mount package; RoHS compliant.
