Спецификации
| Атрибут | Ценность |
| Package / Case | Tube |
| Part Status | Active |
| Type | Transceiver, Isolated |
| Protocol | CAN |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 100 mV |
| Data Rate | 5Mbps |
| Voltage - Supply | 1.71V ~ 1.89V, 2.25V ~ 5.5V, 4.5V |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
Обзор
Description
ISO1044BD does not appear to be a recognized standard under the International Organization for Standardization (ISO) as of my last update. ISO standards are typically designated by numbers, such as ISO 9001 or ISO 14001, and if ISO1044BD were a valid standard, it would likely follow this numerical pattern.
If ISO1044BD is a newly introduced or sector-specific guideline, it might pertain to a niche industry or be in the early stages of recognition. To gain a comprehensive understanding, it is advisable to consult the official ISO website or contact relevant industry bodies that may have insights into this standard.
In summary, without further context or official documentation, it is challenging to provide a detailed introduction to ISO1044BD. Always refer to the latest resources for the most current and precise information.
If ISO1044BD is a newly introduced or sector-specific guideline, it might pertain to a niche industry or be in the early stages of recognition. To gain a comprehensive understanding, it is advisable to consult the official ISO website or contact relevant industry bodies that may have insights into this standard.
In summary, without further context or official documentation, it is challenging to provide a detailed introduction to ISO1044BD. Always refer to the latest resources for the most current and precise information.
Equivalent
The ISO1044BD is an isolated CAN transceiver from Texas Instruments. Equivalent products from other manufacturers include:
1. ADM3055E from Analog Devices
2. MAX14878 from Maxim Integrated
3. TJA1052T/3 from NXP Semiconductors
4. AMIS-30663 from ON Semiconductor
These alternatives provide similar isolated CAN bus communication capabilities but may vary in specific parameters like isolation voltage, supply voltage, or packaging. Always verify compatibility with your application's requirements before selecting an alternative.
1. ADM3055E from Analog Devices
2. MAX14878 from Maxim Integrated
3. TJA1052T/3 from NXP Semiconductors
4. AMIS-30663 from ON Semiconductor
These alternatives provide similar isolated CAN bus communication capabilities but may vary in specific parameters like isolation voltage, supply voltage, or packaging. Always verify compatibility with your application's requirements before selecting an alternative.
Features
ISO1044BD is a digital isolator from Texas Instruments designed for electrical isolation between different parts of a circuit. Key features include:
1. Isolation Voltage: Provides high isolation voltage, typically up to 5000 VRMS, ensuring robust protection against electrical noise and surges.
2. Data Rate: Supports data rates up to 100 Mbps, suitable for high-speed communication applications.
3. Propagation Delay: Low propagation delay (typically around 10-13 ns), enhancing performance in time-sensitive applications.
4. Channel Configuration: Offers multiple channel configurations, including bidirectional and unidirectional options, to suit varied application requirements.
5. Temperature Range: Operates over a wide temperature range, often from -40°C to +125°C, making it versatile for different environments.
6. Low Power Consumption: Designed for low power usage, which is beneficial in energy-sensitive applications.
7. Noise Immunity: Excellent noise immunity, reducing the risk of data corruption in electrically noisy environments.
8. Compact Package: Available in small form-factor packages, aiding in space-constrained designs.
These features make ISO1044BD suitable for industrial automation, motor control, and other applications requiring reliable galvanic isolation.
1. Isolation Voltage: Provides high isolation voltage, typically up to 5000 VRMS, ensuring robust protection against electrical noise and surges.
2. Data Rate: Supports data rates up to 100 Mbps, suitable for high-speed communication applications.
3. Propagation Delay: Low propagation delay (typically around 10-13 ns), enhancing performance in time-sensitive applications.
4. Channel Configuration: Offers multiple channel configurations, including bidirectional and unidirectional options, to suit varied application requirements.
5. Temperature Range: Operates over a wide temperature range, often from -40°C to +125°C, making it versatile for different environments.
6. Low Power Consumption: Designed for low power usage, which is beneficial in energy-sensitive applications.
7. Noise Immunity: Excellent noise immunity, reducing the risk of data corruption in electrically noisy environments.
8. Compact Package: Available in small form-factor packages, aiding in space-constrained designs.
These features make ISO1044BD suitable for industrial automation, motor control, and other applications requiring reliable galvanic isolation.
Pinout
The ISO1044BD is a high-speed digital isolator designed by Texas Instruments. It is commonly used in industrial applications for isolating digital signals. The device features a dual-channel configuration with a total of 8 pins.
Here is a breakdown of its pin functions:
1. VCC1 (Pin 1): Power supply for the input side.
2. IN1 (Pin 2): Input channel 1.
3. GND1 (Pin 3): Ground for the input side.
4. IN2 (Pin 4): Input channel 2.
5. GND2 (Pin 5): Ground for the output side.
6. OUT2 (Pin 6): Output channel 2.
7. OUT1 (Pin 7): Output channel 1.
8. VCC2 (Pin 8): Power supply for the output side.
The ISO1044BD provides reinforced isolation, ensuring that there is electrical separation between the input and output sides. This isolation helps in protecting sensitive components from high-voltage transients and noise in communication interfaces.
Here is a breakdown of its pin functions:
1. VCC1 (Pin 1): Power supply for the input side.
2. IN1 (Pin 2): Input channel 1.
3. GND1 (Pin 3): Ground for the input side.
4. IN2 (Pin 4): Input channel 2.
5. GND2 (Pin 5): Ground for the output side.
6. OUT2 (Pin 6): Output channel 2.
7. OUT1 (Pin 7): Output channel 1.
8. VCC2 (Pin 8): Power supply for the output side.
The ISO1044BD provides reinforced isolation, ensuring that there is electrical separation between the input and output sides. This isolation helps in protecting sensitive components from high-voltage transients and noise in communication interfaces.
Manufacturer
The ISO1044BD is manufactured by Texas Instruments (TI). Texas Instruments is an American technology company that designs and manufactures semiconductors and various integrated circuits. They are a major player in the electronics industry and supply components for a wide range of applications, including consumer electronics, automotive systems, industrial equipment, and communications technology. TI is well-regarded for its innovation and has a significant presence in both the analog and digital semiconductor markets.
Application
The ISO1044BD refers to a specific standard or product, but assuming you meant ISO 10444, which pertains to the classification and dimensions of thrust bearings, its primary application areas include mechanical engineering and manufacturing sectors. It is used in designing machinery components that require thrust bearings, such as automotive systems, industrial machinery, and aerospace components. The standard ensures compatibility and interchangeability of thrust bearings, facilitating their use in rotating equipment where axial loads need support. Thus, it is crucial for engineers and manufacturers who need precise and reliable bearing specifications to enhance performance and longevity of machinery.
Package
The ISO1044BD is an isolated CAN transceiver from Texas Instruments. It typically comes in an 8-pin SOIC (Small Outline Integrated Circuit) package, which is a surface-mounted package type.
