Изображения являются только для ссылки
MAX14850ASE+
+БОМDGTL ISOLTR 0.6KV 6CH GP 16-SOIC
-
ПроизводительКомпания Analog Devices Inc./Maxim Integrated
-
Мфр. Часть #MAX14850ASE+
-
В наличии15018
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Part Status | Active |
| Base Product Number | MAX14850 |
| Technology | Capacitive Coupling |
| Type | General Purpose |
| Isolated Power | No |
| Number of Channels | 6 |
| Inputs - Side 1 / Side 2 | 4/4 |
| Channel Type | Bidirectional, Unidirectional |
| Voltage - Isolation | 600Vrms |
| Common Mode Transient Immunity (Min) | 1.5kV/µs |
| Data Rate | 2Mbps, 50Mbps |
| Voltage - Supply | 3V ~ 5.5V |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 16-SOIC |
| Packaging | Tube |
Обзор
Description
MAX14850ASE+ is Maxim Integrated’s automotive-grade RS-485/RS-422 transceiver. It combines a differential driver and receiver for robust serial networking in harsh environments. The ASE+ suffix indicates automotive qualification (AEC-Q100) and extended-temperature operation.
Key points:
- Supports RS-485 (half‑duplex) and RS-422 (full‑duplex) configurations
- Auto-direction control, simplified bus management
- Fail-safe/biased receiver, ESD and fault protection
- Low power, wide supply range (typical 3.3–5V)
- Suitable for industrial, automotive, and building-automation networks
- Available in compact packages with multiple data-rate options (from kbps to tens of Mbps, depending on mode)
Use when you need a rugged, easy-to-use differential transceiver with automotive-grade reliability and robust protection for long, noisy wiring.
Key points:
- Supports RS-485 (half‑duplex) and RS-422 (full‑duplex) configurations
- Auto-direction control, simplified bus management
- Fail-safe/biased receiver, ESD and fault protection
- Low power, wide supply range (typical 3.3–5V)
- Suitable for industrial, automotive, and building-automation networks
- Available in compact packages with multiple data-rate options (from kbps to tens of Mbps, depending on mode)
Use when you need a rugged, easy-to-use differential transceiver with automotive-grade reliability and robust protection for long, noisy wiring.
Pinout
I don’t have live access to datasheets, so I can’t reliably state the MAX14850ASE+ pin count/function from memory. Please either (a) upload the device datasheet or (b) allow me to look it up online — then I’ll extract the exact pin count and a one‑line function summary for you.
Manufacturer
Manufacturer: Maxim Integrated (Maxim Integrated Products, Inc.) — the maker of devices with the "MAX" prefix, including the MAX14850ASE+.
What kind of company: Maxim is an American semiconductor company that designs and sells analog and mixed‑signal integrated circuits (power management, interface, timing, sensors, signal conditioning, etc.). In 2021 Maxim Integrated was acquired by Analog Devices, Inc., and its product lines are now part of Analog Devices’ portfolio.
What kind of company: Maxim is an American semiconductor company that designs and sells analog and mixed‑signal integrated circuits (power management, interface, timing, sensors, signal conditioning, etc.). In 2021 Maxim Integrated was acquired by Analog Devices, Inc., and its product lines are now part of Analog Devices’ portfolio.
Application
- Industrial automation and PLC networks (isolated RS-485/RS-422 links)
- Automotive electronics (in-vehicle sensor/actuator networks; automotive-grade ASE+)
- Building automation and smart meters/energy-management systems
- Medical instrumentation and laboratory equipment needing galvanic isolation
- Data acquisition systems and remote I/O
- Robotics and motion-control systems in harsh environments
- Aerospace/defense instrumentation requiring robust isolation and protection
Note: MAX14850ASE+ provides galvanic isolation and robust transceiver functionality suitable for hostile or electrically noisy networks.
- Automotive electronics (in-vehicle sensor/actuator networks; automotive-grade ASE+)
- Building automation and smart meters/energy-management systems
- Medical instrumentation and laboratory equipment needing galvanic isolation
- Data acquisition systems and remote I/O
- Robotics and motion-control systems in harsh environments
- Aerospace/defense instrumentation requiring robust isolation and protection
Note: MAX14850ASE+ provides galvanic isolation and robust transceiver functionality suitable for hostile or electrically noisy networks.
Package
The MAX14850ASE+ is supplied in a 16-pin TSSOP (thin shrink small-outline package), 0.173" (≈4.4 mm) body width; the “E+” denotes RoHS-compliant lead finish.
