Изображения являются только для ссылки
Спецификации
| Атрибут | Ценность |
| Package | Tube,Tube |
| ProductStatus | Obsolete |
| Type | Transceiver |
| Protocol | RS232 |
| NumberofDrivers/Receivers | 2/2 |
| Duplex | Full |
| ReceiverHysteresis | 500 mV |
| DataRate | 1Mbps |
| Voltage-Supply | 3V ~ 5.5V |
| OperatingTemperature | 0°C ~ 70°C |
| MountingType | Surface Mount |
| Package/Case | 16-SSOP (0.209, 5.30mm Width) |
Обзор
Description
MAX3232ECAE+ is a dual RS-232 transceiver from Maxim Integrated (now Analog Devices). It provides two drivers and two receivers to bridge TTL/CMOS UARTs with RS-232 devices, so a microcontroller can talk to a PC or modem without needing ±12 V supplies.
Key points:
- Operates from a single supply: 3.0–5.5 V.
- Uses a charge pump with four external capacitors to create RS-232 voltage levels.
- TTL/CMOS side: T1IN/T2IN are MCU inputs; T1OUT/T2OUT drive RS-232 lines.
- RS-232 side: R1IN/R2IN accept RS-232 signals; R1OUT/R2OUT go to MCU.
- Data rates suitable for typical UART speeds (hundreds of kbps).
- Suitable for MCU serial ports, embedded systems, and serial adapters.
Suffix ECAE+ denotes a specific package and temperature grade; check the datasheet for exact package type and operating temp range.
Key points:
- Operates from a single supply: 3.0–5.5 V.
- Uses a charge pump with four external capacitors to create RS-232 voltage levels.
- TTL/CMOS side: T1IN/T2IN are MCU inputs; T1OUT/T2OUT drive RS-232 lines.
- RS-232 side: R1IN/R2IN accept RS-232 signals; R1OUT/R2OUT go to MCU.
- Data rates suitable for typical UART speeds (hundreds of kbps).
- Suitable for MCU serial ports, embedded systems, and serial adapters.
Suffix ECAE+ denotes a specific package and temperature grade; check the datasheet for exact package type and operating temp range.
Equivalent
Equivalent RS-232 transceivers (3.3 V, 2-driver/2-receiver):
- STMicroelectronics SP3232E
- Analog Devices ADM3232 / ADM3232E
- Renesas/Intersil ICS3232
- STMicroelectronics SP3232E
- Analog Devices ADM3232 / ADM3232E
- Renesas/Intersil ICS3232
Features
Here are the features of MAX3232ECAE+ (RS-232 transceiver):
- Dual RS-232 driver and dual RS-232 receiver (2 transmitters, 2 receivers)
- Single-supply operation: 3.0V to 5.5V (no negative supply required)
- External charge-pump capacitors: four 0.1 µF capacitors required
- Generates RS-232 level signals from TTL/CMOS logic and vice versa (typical ±6V RS-232 levels)
- TTL/CMOS input thresholds; compatible with standard logic levels
- Data rates suitable for typical RS-232 links (hundreds of kbps range)
- Extended temperature variant: -40°C to +85°C
- Lead-free/RoHS-compliant package options (often 8-pin SOIC/TSSOP)
- Small, cost-effective, easy to use (requires only capacitors for the charge pump)
Note: Always check the specific datasheet for exact voltage swings, current, and timing specs for the ECAE+ variant.
- Dual RS-232 driver and dual RS-232 receiver (2 transmitters, 2 receivers)
- Single-supply operation: 3.0V to 5.5V (no negative supply required)
- External charge-pump capacitors: four 0.1 µF capacitors required
- Generates RS-232 level signals from TTL/CMOS logic and vice versa (typical ±6V RS-232 levels)
- TTL/CMOS input thresholds; compatible with standard logic levels
- Data rates suitable for typical RS-232 links (hundreds of kbps range)
- Extended temperature variant: -40°C to +85°C
- Lead-free/RoHS-compliant package options (often 8-pin SOIC/TSSOP)
- Small, cost-effective, easy to use (requires only capacitors for the charge pump)
Note: Always check the specific datasheet for exact voltage swings, current, and timing specs for the ECAE+ variant.
Pinout
Pin count: 16 pins (16-pin package, e.g., SOIC-16/DIP-16).
Function: A dual RS-232 transceiver (two drivers and two receivers) that converts TTL/CMOS logic levels to RS-232 levels and RS-232 levels back to TTL/CMOS. Uses a charge-pump to generate RS-232 voltages and requires four external capacitors; operates from 3.0–5.5V.
Function: A dual RS-232 transceiver (two drivers and two receivers) that converts TTL/CMOS logic levels to RS-232 levels and RS-232 levels back to TTL/CMOS. Uses a charge-pump to generate RS-232 voltages and requires four external capacitors; operates from 3.0–5.5V.
Manufacturer
Manufacturer: Maxim Integrated.
What kind of company: A fabless semiconductor company that designs and markets analog and mixed-signal integrated circuits; it was acquired by Analog Devices in 2021.
What kind of company: A fabless semiconductor company that designs and markets analog and mixed-signal integrated circuits; it was acquired by Analog Devices in 2021.
Application
MAX3232ECAE+ 主要用于把TTL/CMOS电平与RS-232电平互转，适合3V–5V供电系统的串口应用：
- 嵌入式系统：MCU与PC/主机的RS-232通信
- 工业自动化与控制：PLC、数据采集、传感器接口
- 通信设备：调制解调器、网关、路由器的串口管理
- 零售与POS：收银机、打印机、条码扫描外设
- 数据采集与仪表：数据记录仪、计量设备的RS-232接口
- 医疗与便携设备：需要 RS-232 的低功耗串口通信
- 其他需要稳定RS-232接口的场景
- 嵌入式系统：MCU与PC/主机的RS-232通信
- 工业自动化与控制：PLC、数据采集、传感器接口
- 通信设备：调制解调器、网关、路由器的串口管理
- 零售与POS：收银机、打印机、条码扫描外设
- 数据采集与仪表：数据记录仪、计量设备的RS-232接口
- 医疗与便携设备：需要 RS-232 的低功耗串口通信
- 其他需要稳定RS-232接口的场景
Package
MAX3232ECAE+ is offered in a 16‑pin small‑outline package (SOIC/SSOP/TSSOP). Check the datasheet for the exact option and RoHS/lead‑free variant.
