Изображения являются только для ссылки
Спецификации
| Атрибут | Ценность |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| Type | DC DC Regulator |
| Topology | Flyback |
| InternalSwitch(s) | No |
| NumberofOutputs | 1 |
| Voltage-Supply(Min) | 11V |
| Voltage-Supply(Max) | 27V |
| Dimming | Analog, PWM, TRIAC |
| Applications | Commercial & Industrial Lighting |
| OperatingTemperature | -40°C ~ 125°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
Обзор
Description
MP4033GS-Z is a synchronous buck regulator IC from Monolithic Power Systems. It integrates the high- and low-side MOSFETs and control logic to efficiently convert a higher input voltage to a lower, regulated output for compact power rails (typical 1–3 A).
Key features:
- Wide input range and adjustable output via external feedback
- Fixed-frequency current‑mode control with soft-start
- Enable pin; overcurrent/over‑voltage protection; thermal shutdown
- Synchronous design (no external Schottky diode required)
- Small 8‑pin package (RoHS)
Typical applications: powering microprocessors, FPGAs, DSPs, memory, and peripherals in consumer, industrial, and automotive electronics.
Basic usage: connect VIN and GND, SW to the LC network, set Vout with the FB divider, and enable with EN. Follow the datasheet for recommended external components and PCB layout.
Key features:
- Wide input range and adjustable output via external feedback
- Fixed-frequency current‑mode control with soft-start
- Enable pin; overcurrent/over‑voltage protection; thermal shutdown
- Synchronous design (no external Schottky diode required)
- Small 8‑pin package (RoHS)
Typical applications: powering microprocessors, FPGAs, DSPs, memory, and peripherals in consumer, industrial, and automotive electronics.
Basic usage: connect VIN and GND, SW to the LC network, set Vout with the FB divider, and enable with EN. Follow the datasheet for recommended external components and PCB layout.
Features
Here are the typical features of MP4033GS-Z (stepper motor driver with translator). For exact specs, consult the datasheet.
- Stepper motor driver with integrated translator (STEP/DIR interface)
- Two-phase drive with microstepping (configurable, up to high microstep resolution)
- Adjustable current regulation (RMS current set by external resistor)
- Wide operating supply range (suitable for various motor voltages)
- Protections: overcurrent, overtemperature/thermal shutdown, undervoltage lockout
- Sleep/Enable/Reset controls and optional PWM decay mode
- Diagnostic/status indicators (flag/ready signals)
- Low-noise, high-efficiency DMOS output stage
- Small package, RoHS-compliant (GS-Z suffix typically indicates a compact package variant)
Note: Exact current range, voltage limits, and pinout depend on the specific revision; verify with the latest MP4033GS-Z datasheet.
- Stepper motor driver with integrated translator (STEP/DIR interface)
- Two-phase drive with microstepping (configurable, up to high microstep resolution)
- Adjustable current regulation (RMS current set by external resistor)
- Wide operating supply range (suitable for various motor voltages)
- Protections: overcurrent, overtemperature/thermal shutdown, undervoltage lockout
- Sleep/Enable/Reset controls and optional PWM decay mode
- Diagnostic/status indicators (flag/ready signals)
- Low-noise, high-efficiency DMOS output stage
- Small package, RoHS-compliant (GS-Z suffix typically indicates a compact package variant)
Note: Exact current range, voltage limits, and pinout depend on the specific revision; verify with the latest MP4033GS-Z datasheet.
Pinout
Pin count: 8 pins (package type: SOP-8/MSOP-8 typically).
Function: MP4033GS-Z is an 8-pin DC-DC buck regulator (step-down switching regulator) used for power management with pins for VIN, GND, LX/SW, FB, EN, and other control/compensation signals.
Function: MP4033GS-Z is an 8-pin DC-DC buck regulator (step-down switching regulator) used for power management with pins for VIN, GND, LX/SW, FB, EN, and other control/compensation signals.
Manufacturer
Manufacturer: Monolithic Power Systems, Inc. (MPS).
What kind of company: A fabless semiconductor company that designs and markets high-performance analog and mixed-signal power-management ICs (DC-DC converters, PMICs, LDOs, etc.).
What kind of company: A fabless semiconductor company that designs and markets high-performance analog and mixed-signal power-management ICs (DC-DC converters, PMICs, LDOs, etc.).
Application
Typical application areas for MP4033GS-Z (power MOSFET) include:
- High-efficiency switch-mode power supplies and DC-DC converters (buck/boost, synchronous rectification)
- DC motor driver and control circuits
- LED driver and backlight power stages
- Load switches and reverse-blocking in portable and automotive power management
- Battery protection circuits and other power-management blocks in consumer, industrial, and automotive electronics
Note: verify with the official datasheet for exact current/voltage ratings and package specifics.
- High-efficiency switch-mode power supplies and DC-DC converters (buck/boost, synchronous rectification)
- DC motor driver and control circuits
- LED driver and backlight power stages
- Load switches and reverse-blocking in portable and automotive power management
- Battery protection circuits and other power-management blocks in consumer, industrial, and automotive electronics
Note: verify with the official datasheet for exact current/voltage ratings and package specifics.
Package
QFN-16 (3×3 mm) with exposed pad; lead-free/RoHS-compliant (GS-Z variant).
