Спецификации
| Атрибут | Ценность |
| Package | Tape & Reel (TR),Bulk |
| ProductStatus | Active |
| Type | AC DC Offline Switcher |
| Topology | Flyback |
| InternalSwitch(s) | No |
| NumberofOutputs | 1 |
| Voltage-Supply(Min) | 8.8V |
| Voltage-Supply(Max) | 20V |
| Dimming | Analog, PWM |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
Обзор
Description
NCL30082BDR2G is an ON Semiconductor LED driver IC. It is an off-line flyback switching regulator with an integrated high-voltage power MOSFET, designed to drive constant-current LED strings directly from rectified mains in compact LED lighting applications.
Key points:
- Integrated high-voltage FET and current-mode control for simple, few-external-part LED drivers.
- Primary-side regulation and/or sense-feedback configurations to regulate LED current.
- Protections: open/short LED protection, overcurrent/overvoltage protection, and thermal shutdown.
- Soft-start and dimming support (PWM or analog dimming interfaces) for brightness control.
- Packaged in the BDR2G designation (a small, high-density package).
Typical uses include LED bulbs, downlights, and signage where offline, constant-current LED driving is desired with minimal external components. For exact electrical specs (LED current level, input range, dimming behavior, soft-start, and protection thresholds), refer to the NCL30082BDR2G datasheet and product page.
Key points:
- Integrated high-voltage FET and current-mode control for simple, few-external-part LED drivers.
- Primary-side regulation and/or sense-feedback configurations to regulate LED current.
- Protections: open/short LED protection, overcurrent/overvoltage protection, and thermal shutdown.
- Soft-start and dimming support (PWM or analog dimming interfaces) for brightness control.
- Packaged in the BDR2G designation (a small, high-density package).
Typical uses include LED bulbs, downlights, and signage where offline, constant-current LED driving is desired with minimal external components. For exact electrical specs (LED current level, input range, dimming behavior, soft-start, and protection thresholds), refer to the NCL30082BDR2G datasheet and product page.
Features
NCL30082BDR2G key features (concise):
- Fully integrated high-voltage switch: 700 V DMOS for offline LED applications.
- Buck-boost current-mode LED driver: constant-current regulation for LED strings.
- Wide input range suitable for rectified mains/DC buses; supports universal operation.
- Fixed-frequency operation with high-efficiency valley/quasi-resonant switching.
- Primary-side feedback options with sense resistor for accurate LED current; supports dimming.
- Dimming control via DIM (PWM/analog) input.
- Robust protection: UVLO, overcurrent/short-circuit, thermal shutdown, LED open-circuit protection.
- Soft-start to limit inrush and protect LEDs.
- Low external component count; compact package (BDR2G).
- Applications: off-line LED lighting, retrofit lamps, downlights, LED strings.
- Fully integrated high-voltage switch: 700 V DMOS for offline LED applications.
- Buck-boost current-mode LED driver: constant-current regulation for LED strings.
- Wide input range suitable for rectified mains/DC buses; supports universal operation.
- Fixed-frequency operation with high-efficiency valley/quasi-resonant switching.
- Primary-side feedback options with sense resistor for accurate LED current; supports dimming.
- Dimming control via DIM (PWM/analog) input.
- Robust protection: UVLO, overcurrent/short-circuit, thermal shutdown, LED open-circuit protection.
- Soft-start to limit inrush and protect LEDs.
- Low external component count; compact package (BDR2G).
- Applications: off-line LED lighting, retrofit lamps, downlights, LED strings.
Pinout
Pin count: 8 pins.
Function: NCL30082BDR2G is an 8‑pin integrated switching LED driver/controller with an internal MOSFET. It provides a constant-current drive for an LED string (buck topology) using feedback (FB) to regulate current, with VIN and GND power pins, a switching node (SW), and control/dimming/enabling pins (e.g., EN/DIM/ISET).
Function: NCL30082BDR2G is an 8‑pin integrated switching LED driver/controller with an internal MOSFET. It provides a constant-current drive for an LED string (buck topology) using feedback (FB) to regulate current, with VIN and GND power pins, a switching node (SW), and control/dimming/enabling pins (e.g., EN/DIM/ISET).
Manufacturer
- Manufacturer: ON Semiconductor (ON Semi)
- What kind of company: An American multinational semiconductor company that designs and manufactures energy‑efficient ICs and discrete devices for automotive, industrial, consumer electronics, and communications applications.
- What kind of company: An American multinational semiconductor company that designs and manufactures energy‑efficient ICs and discrete devices for automotive, industrial, consumer electronics, and communications applications.
Application
NCL30082BDR2G is used for off-line LED driver applications. Key areas:
- Mains-powered, constant-current LED drivers
- Flyback topology with primary-side regulation (PSR)
- General lighting: LED bulbs, downlights, troffers, tubes
- LED signage and architectural/task lighting
- Standalone driver modules and retrofit lighting up to tens of watts
Suitable for compact, energy-efficient AC-DC LED power supplies in commercial and residential lighting.
- Mains-powered, constant-current LED drivers
- Flyback topology with primary-side regulation (PSR)
- General lighting: LED bulbs, downlights, troffers, tubes
- LED signage and architectural/task lighting
- Standalone driver modules and retrofit lighting up to tens of watts
Suitable for compact, energy-efficient AC-DC LED power supplies in commercial and residential lighting.
Package
NCL30082BDR2G comes in an 8-pin SOIC (D8) package, RoHS-compliant/lead-free.
