Спецификации
| Атрибут | Ценность |
| Package / Case | Tape & Reel (TR) |
| Series | Automotive, AEC-Q101 |
| Part Status | Active |
| Switch Type | General Purpose |
| Number of Outputs | 1 |
| Ratio - Input: Output | 1:1 |
| Output Configuration | Low Side |
| Output Type | N-Channel |
| Interface | On/Off |
| Voltage - Load | 42V (Max) |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Current - Output (Max) | 6A |
| Rds On (Typ) | 90mOhm |
| Input Type | Non-Inverting |
| Features | Auto Restart |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | DPAK |
Обзор
Description
NCV8405BDTRKG is ON Semiconductor’s automotive-grade high-side switch (load switch) IC. It integrates a power MOSFET with control logic and protections to let a microcontroller switch a 12 V automotive load (lamp, actuator, etc.) safely.
Key features (typical):
- Protection: reverse polarity, undervoltage lockout, overcurrent/short-circuit with current limit, thermal shutdown
- Diagnostics: fault/diagnostic output
- Wide automotive voltage range and transient tolerance for vehicle environments
- Package: RoHS Pb-free, tape-and-reel (BDTRKG code) in a surface-mount power package
Typical uses:
- Body electronics, lighting, power windows, seat/actuator control
Note:
- For exact electrical specs (voltage range, current limit, thresholds) and pinout, consult the NCV8405BDTRKG datasheet on ON Semiconductor’s website.
Key features (typical):
- Protection: reverse polarity, undervoltage lockout, overcurrent/short-circuit with current limit, thermal shutdown
- Diagnostics: fault/diagnostic output
- Wide automotive voltage range and transient tolerance for vehicle environments
- Package: RoHS Pb-free, tape-and-reel (BDTRKG code) in a surface-mount power package
Typical uses:
- Body electronics, lighting, power windows, seat/actuator control
Note:
- For exact electrical specs (voltage range, current limit, thresholds) and pinout, consult the NCV8405BDTRKG datasheet on ON Semiconductor’s website.
Equivalent
I can’t give exact cross‑references without knowing the device function. NCV8405BDTRKG could be a regulator, CAN transceiver, high‑side switch, etc. Please confirm the part’s function or share the datasheet/app note (or key specs: voltage, current, package). With that, I’ll provide precise equivalents from TI, ST, NXP, Renesas, Microchip, and ON Semiconductor.
Features
NCV8405BDTRKG is an automotive-grade, single-channel high-side switch for DC loads. Key features:
- Wide load voltage range with automotive transients tolerance (up to about 60 V)
- Built-in current limiting and short-circuit protection
- Undervoltage lockout and overtemperature/thermal shutdown
- Reverse-battery protection
- Enable/input control and a diagnostic/status output for fault/enable indication
- Slew-rate control to reduce EMI
- Low quiescent current
- Fault-latch capability and protection against false turn-on
- RoHS compliant and AEC-Q100 qualified
Note: For exact electrical specifications (voltage range, current limit, propagation delays, and diagnostic pin behavior), please refer to the official datasheet.
- Wide load voltage range with automotive transients tolerance (up to about 60 V)
- Built-in current limiting and short-circuit protection
- Undervoltage lockout and overtemperature/thermal shutdown
- Reverse-battery protection
- Enable/input control and a diagnostic/status output for fault/enable indication
- Slew-rate control to reduce EMI
- Low quiescent current
- Fault-latch capability and protection against false turn-on
- RoHS compliant and AEC-Q100 qualified
Note: For exact electrical specifications (voltage range, current limit, propagation delays, and diagnostic pin behavior), please refer to the official datasheet.
Pinout
- Pin count: 8 pins (DTRKG = SO-8 package)
- Function: CAN transceiver. Provides physical layer interface between a microcontroller (TXD/RXD) and the CAN bus (CANH/CANL); powered by VCC (5 V typical) with GND, and includes a standby/shutdown control pin.
- Function: CAN transceiver. Provides physical layer interface between a microcontroller (TXD/RXD) and the CAN bus (CANH/CANL); powered by VCC (5 V typical) with GND, and includes a standby/shutdown control pin.
Manufacturer
- Manufacturer: ON Semiconductor (onsemi)
- What kind of company: A global semiconductor company that designs and manufactures integrated circuits, discrete semiconductors, sensors, and power-management devices for automotive, industrial, communications, and consumer markets.
- What kind of company: A global semiconductor company that designs and manufactures integrated circuits, discrete semiconductors, sensors, and power-management devices for automotive, industrial, communications, and consumer markets.
Application
NCV8405BDTRKG is a 12V automotive high-side load switch. Typical applications:
- ECU-controlled loads in automotive body electronics
- Lighting systems (interior/exterior lamps and LED arrays)
- Actuators (power windows, seats, wipers, HVAC actuators)
- Pumps and solenoids in engine/chassis subsystems
- Other DC loads requiring protection and current limiting
Features enabling use: built-in protections for reverse battery, short-to-ground/overcurrent, undervoltage, and thermal shutdown, with controllable turn-on/turn-off via microcontroller.
- ECU-controlled loads in automotive body electronics
- Lighting systems (interior/exterior lamps and LED arrays)
- Actuators (power windows, seats, wipers, HVAC actuators)
- Pumps and solenoids in engine/chassis subsystems
- Other DC loads requiring protection and current limiting
Features enabling use: built-in protections for reverse battery, short-to-ground/overcurrent, undervoltage, and thermal shutdown, with controllable turn-on/turn-off via microcontroller.
Package
An 8-pin SOIC package (SO-8). The “TR” indicates Tape & Reel packaging and “KG” denotes Pb-free RoHS-compliant version.
