Спецификации
| Атрибут | Ценность |
| Package | Bulk,Tube |
| ProductStatus | Obsolete |
| NumberofI/O | 8 |
| Interface | I²C, SMBus |
| InterruptOutput | Yes |
| Features | POR |
| OutputType | Push-Pull |
| Current-OutputSource/Sink | 10mA, 25mA |
| ClockFrequency | 400 kHz |
| Voltage-Supply | 2.3V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 16-TSSOP (0.173, 4.40mm Width) |
Обзор
Description
The PCA9534PW is an I²C-bus controlled 8-bit I/O expander produced by NXP Semiconductors. It is designed to provide additional GPIO pins for microcontrollers, enabling the expansion of I/O capabilities using a straightforward I²C interface. The device operates at a voltage range of 2.3V to 5.5V, making it compatible with a variety of systems.
Key features of the PCA9534PW include:
1. 8-bit I/O Ports: It offers 8 configurable input/output pins that can be individually set as either inputs or outputs.
2. I²C Interface: The device communicates via the I²C-bus, supporting standard (100 kHz) and fast mode (400 kHz).
3. Low Standby Current: It is designed for low power consumption, which is advantageous in battery-operated devices.
4. Interrupt Output: The device provides an interrupt output that alerts the microcontroller to any changes in the input port.
5. Addressability: Up to 8 devices can be connected on the same I²C bus by configuring three address pins, allowing for expanded I/O capacity.
These features make the PCA9534PW suitable for applications where additional GPIOs are needed and low power consumption is crucial.
Key features of the PCA9534PW include:
1. 8-bit I/O Ports: It offers 8 configurable input/output pins that can be individually set as either inputs or outputs.
2. I²C Interface: The device communicates via the I²C-bus, supporting standard (100 kHz) and fast mode (400 kHz).
3. Low Standby Current: It is designed for low power consumption, which is advantageous in battery-operated devices.
4. Interrupt Output: The device provides an interrupt output that alerts the microcontroller to any changes in the input port.
5. Addressability: Up to 8 devices can be connected on the same I²C bus by configuring three address pins, allowing for expanded I/O capacity.
These features make the PCA9534PW suitable for applications where additional GPIOs are needed and low power consumption is crucial.
Equivalent
The PCA9534PW is an I2C-bus I/O expander. Equivalent products include the TCA9534 from Texas Instruments, the MCP23008 from Microchip Technology, and the SX1509 from Semtech. These alternatives offer similar features like I2C interface, GPIO pins, and voltage compatibility, although specific features and performance may vary. Always check datasheets for compatibility with your project requirements.
Features
The PCA9534PW is an I²C-bus controlled 8-bit I/O expander manufactured by NXP Semiconductors. It offers several key features:
1. I²C Interface: Supports I²C-bus data rates up to 400 kHz, allowing for fast communication with microcontrollers.
2. 8-bit I/O Port: Provides 8 configurable input/output pins, enabling additional GPIO pins for microcontrollers.
3. Operating Voltage: Functions within a voltage range of 2.3V to 5.5V, suitable for various applications.
4. Interrupt Output: Includes an interrupt output pin that can alert the microcontroller to any changes on the input port.
5. Low Standby Current: Consumes minimal power in standby mode, making it energy efficient.
6. High-Drive Capability: I/O pins can drive LEDs directly, supporting high current sink capabilities.
7. Latch-up Free: Designed to be robust against latch-up issues, enhancing reliability.
8. SMBus Compatibility: While primarily for I²C, it can also be used with the SMBus protocol.
9. Package Options: Available in compact packages like TSSOP and VSSOP, facilitating space-constrained designs.
These features make the PCA9534PW a versatile choice for expanding I/O capabilities in various embedded applications.
1. I²C Interface: Supports I²C-bus data rates up to 400 kHz, allowing for fast communication with microcontrollers.
2. 8-bit I/O Port: Provides 8 configurable input/output pins, enabling additional GPIO pins for microcontrollers.
3. Operating Voltage: Functions within a voltage range of 2.3V to 5.5V, suitable for various applications.
4. Interrupt Output: Includes an interrupt output pin that can alert the microcontroller to any changes on the input port.
5. Low Standby Current: Consumes minimal power in standby mode, making it energy efficient.
6. High-Drive Capability: I/O pins can drive LEDs directly, supporting high current sink capabilities.
7. Latch-up Free: Designed to be robust against latch-up issues, enhancing reliability.
8. SMBus Compatibility: While primarily for I²C, it can also be used with the SMBus protocol.
9. Package Options: Available in compact packages like TSSOP and VSSOP, facilitating space-constrained designs.
These features make the PCA9534PW a versatile choice for expanding I/O capabilities in various embedded applications.
Pinout
The PCA9534PW is an I²C-bus controlled 8-bit I/O expander. It has a total of 16 pins and operates as a general-purpose I/O (GPIO) expander. Here is a brief overview of its pin functions:
1. VCC (Pin 1): Power supply pin.
2. SCL (Pin 2): Serial clock line for I²C communication.
3. SDA (Pin 3): Serial data line for I²C communication.
4. A0, A1, A2 (Pins 4, 5, 6): Address pins used to set the I²C address.
5. P0-P7 (Pins 7-14): Bidirectional I/O pins that can be configured as either inputs or outputs.
6. INT (Pin 15): Interrupt output pin. It goes low when there is a change in the input port data.
7. GND (Pin 8): Ground pin.
The PCA9534PW is used for expanding the number of I/O pins available to a microcontroller, especially useful in applications where I/O is limited. It can operate over the I²C bus, making it easy to integrate into systems using this communication protocol.
1. VCC (Pin 1): Power supply pin.
2. SCL (Pin 2): Serial clock line for I²C communication.
3. SDA (Pin 3): Serial data line for I²C communication.
4. A0, A1, A2 (Pins 4, 5, 6): Address pins used to set the I²C address.
5. P0-P7 (Pins 7-14): Bidirectional I/O pins that can be configured as either inputs or outputs.
6. INT (Pin 15): Interrupt output pin. It goes low when there is a change in the input port data.
7. GND (Pin 8): Ground pin.
The PCA9534PW is used for expanding the number of I/O pins available to a microcontroller, especially useful in applications where I/O is limited. It can operate over the I²C bus, making it easy to integrate into systems using this communication protocol.
Manufacturer
The PCA9534PW is manufactured by NXP Semiconductors. NXP is a global semiconductor company that specializes in the design and production of high-performance mixed-signal and standard product solutions. These solutions are used in a wide range of applications, including automotive, industrial, mobile, and consumer markets. NXP is known for its innovations in secure connectivity, automotive electronics, and the Internet of Things (IoT). It operates as a leading provider of embedded processing and connectivity solutions, focusing on creating secure connections for a smarter world.
Application
The PCA9534PW is a general-purpose I/O expander for I2C-bus applications. It is commonly used in scenarios where additional GPIO ports are needed, such as in industrial automation, consumer electronics, and computing systems. Key applications include:
1. Embedded Systems: Expanding the number of I/O ports in microcontroller-based designs.
2. Industrial Control: Managing multiple signals or sensors in automation systems.
3. Consumer Electronics: Enhancing connectivity for devices like TVs and home appliances.
4. Networking Equipment: Controlling indicators or resetting peripherals.
5. Medical Devices: Managing interfaces in diagnostic and monitoring equipment.
These expanders are valued for their ability to simplify the design and reduce the microcontroller I/O pin requirements.
1. Embedded Systems: Expanding the number of I/O ports in microcontroller-based designs.
2. Industrial Control: Managing multiple signals or sensors in automation systems.
3. Consumer Electronics: Enhancing connectivity for devices like TVs and home appliances.
4. Networking Equipment: Controlling indicators or resetting peripherals.
5. Medical Devices: Managing interfaces in diagnostic and monitoring equipment.
These expanders are valued for their ability to simplify the design and reduce the microcontroller I/O pin requirements.
Package
The PCA9534PW is an I²C-bus I/O port with an interrupt output and is housed in a TSSOP (Thin Shrink Small Outline Package) with 16 pins.
