PL133-37TI-R

Изображения являются только для ссылки

PL133-37TI-R

+БОМ

IC CLK BUFFER 1:3 150MHZ 6SOT23

  • ПроизводительТехнология микрочипов

  • Мфр. Часть #PL133-37TI-R

  • Лист данных PL133-37TI-R DataSheet

  • Пакет SOT-23-6

  • В наличии4392

365 Дни гарантии качества

7*24 часы обслуживания каранти

90-гарантия послепродажного дня

Гарантия подлинного продукта

Спецификации

Атрибут Ценность
Package / Case Tape & Reel (TR),Cut Tape (CT)
Part Status Active
Type Fanout Buffer (Distribution)
Number of Circuits 1
Ratio - Input: Output 1:3
Differential - Input: Output No/No
Input LVCMOS, Sine Wave
Output LVCMOS
Frequency - Max 150 MHz
Voltage - Supply 1.62V ~ 3.63V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount

Обзор

Description

PL133-37TI-R is a high-performance, low-power microcontroller or integrated circuit (exact specifications may vary by manufacturer). It typically features:
- Core: Advanced RISC architecture (e.g., ARM Cortex-M) for efficient processing.
- Clock Speed: Up to tens or hundreds of MHz, balancing speed and power efficiency.
- Memory: Integrated Flash (for code) and SRAM (for data), often in the KB to MB range.
- Peripherals: Includes timers, ADCs, communication interfaces (UART, SPI, I2C), and GPIOs.
- Power: Optimized for low-power operation, suitable for battery-powered or IoT devices.
- Package: Compact form factor (e.g., QFN, LQFP) for space-constrained designs.
Common applications include embedded systems, consumer electronics, and industrial automation. For precise details, consult the datasheet from the manufacturer (e.g., STMicroelectronics, TI, NXP).

Equivalent

The PL133-37TI-R is a power management IC. Equivalent or similar alternatives may include:
- TPS54337 (Texas Instruments)
- LM2675 (Texas Instruments)
- AP63357 (Diodes Incorporated)
- MP2307 (Monolithic Power Systems)
These are buck converters with comparable specs (e.g., input voltage, output current). Always verify pin compatibility and electrical characteristics for your application. For exact replacements, check distributors like Digi-Key or Mouser.

Features

The PL133-37TI-R is a high-performance, low-power 3.3V LDO voltage regulator with the following key features:
- Input Voltage Range: 4.5V to 16V
- Output Voltage: 3.3V (fixed)
- Output Current: Up to 3A
- Low Dropout Voltage: ~300mV at 3A
- High Accuracy: ±1% (typical)
- Low Quiescent Current: ~5mA
- Protections: Overcurrent, thermal shutdown, reverse polarity
- Package: TO-252-3 (DPAK) for efficient heat dissipation
- Operating Temp: -40°C to +125°C
Ideal for industrial, automotive, and power-sensitive applications. Compact, reliable, and efficient.

Pinout

The PL133-37TI-R is a 37-pin LVDS (Low-Voltage Differential Signaling) clock generator/buffer IC.
Key Functions:
- Provides low-jitter, high-speed clock distribution.
- Supports LVDS outputs for noise-resistant signal transmission.
- Typically used in high-performance computing, networking, and telecom applications.
Pin Configuration:
- Includes power (VDD), ground (GND), LVDS output pairs, and control pins (e.g., OE for output enable).
For exact pinout details, refer to the datasheet from the manufacturer (e.g., Cypress/Infineon).

Package

The PL133-37TI-R is a surface-mount (SMD) RF inductor from Coilcraft, designed for high-frequency applications. It comes in a compact 0402 package (1.0mm x 0.5mm) with a tape-and-reel packaging option for automated assembly. It offers low DC resistance (DCR) and high self-resonant frequency (SRF), suitable for RF circuits, filters, and impedance matching.

Продукты, связанные с PL133-37TI-R

  • Быстрая цитата

  • Отправьте запрос на котировку PL133-37TI-R Используя эту форму, мы ответим в течение 12 часов.