Изображения являются только для ссылки
STN2NF10
+БОМMOSFET N-CH 100V 2.4A SOT-223
-
ПроизводительSTМикроэлектроника
-
Мфр. Часть #STN2NF10
-
Лист данных STN2NF10 DataSheet
-
Пакет SOT-223
-
В наличии2957
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | STripFET™ II |
| Part Status | Active |
| FET Type | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 100 V |
| Current - Continuous Drain(Id) @ 25°C | 2.4A (Tc) |
| Drive Voltage(Max Rds On Min Rds On) | 10V |
| Rds On(Max) @ Id Vgs | 260mOhm @ 1.2A, 10V |
| Vgs(th)(Max) @ Id | 4V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 14 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 280 pF @ 25 V |
| Power Dissipation (Max) | 3.3W (Tc) |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | SOT-223 |
Обзор
Equivalent
- IRLML6402 (P-channel, but similar specs)
- BS170 (N-channel, lower current)
- 2N7000 (N-channel, 60V, 0.2A)
- IRLZ44N (N-channel, higher current)
- FQP30N06L (N-channel, 60V, 32A)
Check datasheets for exact compatibility, as specs vary slightly. For drop-in replacements, consider STP2NF10 (same series, TO-220 package).
Features
- Voltage Rating: 100V (Drain-Source, VDSS)
- Current Rating: 2A (Continuous Drain Current, ID)
- Low On-Resistance: ~3.5Ω (RDS(on)) at VGS = 10V
- Fast Switching: Suitable for high-efficiency applications
- Gate Threshold Voltage (VGS(th)): 2–4V
- Power Dissipation: ~2W (TA = 25°C)
- Package: TO-252 (DPAK) for easy mounting
Ideal for low-power switching, DC-DC converters, and motor control due to its balance of voltage tolerance and efficiency.
Pinout
1. Gate (G) – Controls the switching operation (voltage applied here turns the device on/off).
2. Drain (D) – Connects to the load (current flows in when the MOSFET is on).
3. Source (S) – Connected to ground (current flows out).
Key Features:
- 60V drain-source voltage (VDS).
- 2A continuous drain current (ID).
- Low threshold voltage for logic-level control.
Used for switching, amplification, or power management in low-power circuits.
Application
1. Power Electronics – Efficient power conversion in inverters, converters, and motor drives.
2. Renewable Energy Systems – Solar inverters and wind power applications for energy optimization.
3. Industrial Automation – High-performance motor control and robotics.
4. Electric Vehicles (EVs) – Battery management and traction systems.
5. Consumer Electronics – Compact power supplies and energy-efficient devices.
Its high voltage tolerance, fast switching, and low power loss make it ideal for demanding applications.
