Изображения являются только для ссылки
TAS5760MDCAR
+БОМIC AMP D MON/STER 55.2W 48HTSSOP
-
ПроизводительТехасские инструменты
-
Мфр. Часть #TAS5760MDCAR
-
В наличии3427
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Supplier | Texas Instruments |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Type | Class D |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Max Output Powerx Channels @ Load | 55.2W x 1 @ 4Ohm, 63.5W x 2 @ 4Ohm |
| Voltage - Supply | 3V ~ 3.6V |
| Features | Depop |
| Mounting Type | Surface Mount |
| Operating Temperature | -25°C ~ 85°C (TA) |
| Supplier Device Package | 48-HTSSOP |
Обзор
Description
Introduction to TAS5760MDCAR
The TAS5760MDCAR is an automotive-grade, Texas Instruments stereo Class-D audio amplifier. Here MDCAR indicates an Automotive (CAR) package/version, suitable for automotive environments (extended temp range and AEC-Q-compliant options).
Key points:
- Stereo Class-D amplifier that can directly drive speakers with high efficiency.
- Digital input interface (I2S/PCM) from a DAC or MCU, enabling a digital audio path.
- Filterless output architecture: no external output filter required in many designs (simplifies BOM and layout), though EMI considerations apply.
- Protective features: soft-start/mute, pop suppression, overcurrent/short-circuit protection, thermal shutdown, and undervoltage lockout.
- EMI-friendly with clock spreading options and robust automotive-grade design.
- Simple integration for car audio head units, infotainment, dashboards, and other automotive audio modules.
Note: For exact electrical specs, pinout, package options, and recommended application circuits, consult the TAS5760MDCAR datasheet.
The TAS5760MDCAR is an automotive-grade, Texas Instruments stereo Class-D audio amplifier. Here MDCAR indicates an Automotive (CAR) package/version, suitable for automotive environments (extended temp range and AEC-Q-compliant options).
Key points:
- Stereo Class-D amplifier that can directly drive speakers with high efficiency.
- Digital input interface (I2S/PCM) from a DAC or MCU, enabling a digital audio path.
- Filterless output architecture: no external output filter required in many designs (simplifies BOM and layout), though EMI considerations apply.
- Protective features: soft-start/mute, pop suppression, overcurrent/short-circuit protection, thermal shutdown, and undervoltage lockout.
- EMI-friendly with clock spreading options and robust automotive-grade design.
- Simple integration for car audio head units, infotainment, dashboards, and other automotive audio modules.
Note: For exact electrical specs, pinout, package options, and recommended application circuits, consult the TAS5760MDCAR datasheet.
Features
Below are typical features of the TAS5760M MDCAR (car-grade, 2-channel Class-D amp with digital input). For exact specs, refer to the official datasheet.
- 2-channel high-efficiency Class-D audio amplifier with on-chip DAC
- Digital input: I2S/PCM (16–24-bit; compatible sample rates up to common car audio rates)
- On-chip digital volume control, mute, and soft-start to avoid pops
- Pop-free turn-on/turn-off and standby modes
- Automotive-grade wide input voltage range with protection (e.g., undervoltage)
- Fault protection: short-circuit/current limiting and overtemperature with status reporting
- Spread-spectrum PWM for EMI reduction
- Supports typical speaker loads (4 Ω and 8 Ω)
- High SNR and wide dynamic range suitable for automotive environments
- Package: MDCAR automotive packaging for PCB layout and reliability
Note: exact output power, voltage ranges, and pinout depend on the specific variant; consult the datasheet for precise numbers.
- 2-channel high-efficiency Class-D audio amplifier with on-chip DAC
- Digital input: I2S/PCM (16–24-bit; compatible sample rates up to common car audio rates)
- On-chip digital volume control, mute, and soft-start to avoid pops
- Pop-free turn-on/turn-off and standby modes
- Automotive-grade wide input voltage range with protection (e.g., undervoltage)
- Fault protection: short-circuit/current limiting and overtemperature with status reporting
- Spread-spectrum PWM for EMI reduction
- Supports typical speaker loads (4 Ω and 8 Ω)
- High SNR and wide dynamic range suitable for automotive environments
- Package: MDCAR automotive packaging for PCB layout and reliability
Note: exact output power, voltage ranges, and pinout depend on the specific variant; consult the datasheet for precise numbers.
Pinout
Pin count: 16 pins.
Function: TAS5760MDCAR is a stereo Class-D audio amplifier. It provides differential speaker outputs for left and right channels (L+/L-, R+/R-), accepts digital audio data via an I2S/PCM interface (data, bit clock, word select), and includes power, ground, and control pins (such as mute/shutdown and any mode control). The MDCAR suffix denotes a 16‑pin package variant of the TAS5760M.
Function: TAS5760MDCAR is a stereo Class-D audio amplifier. It provides differential speaker outputs for left and right channels (L+/L-, R+/R-), accepts digital audio data via an I2S/PCM interface (data, bit clock, word select), and includes power, ground, and control pins (such as mute/shutdown and any mode control). The MDCAR suffix denotes a 16‑pin package variant of the TAS5760M.
Manufacturer
- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits and related products; one of the world’s largest semiconductor companies, headquartered in Dallas, Texas.
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits and related products; one of the world’s largest semiconductor companies, headquartered in Dallas, Texas.
Application
- In-vehicle audio systems and infotainment (head units, navigation audio, digital cockpits)
- OEM and aftermarket car‑audio modules
- Multi‑channel speaker amplification (front/rear) and subwoofer amplification
- Rear‑seat/center‑channel entertainment systems
- Bluetooth car kits, telematics devices, and other automotive audio modules
Note: TAS5760MDCAR is a high‑efficiency, filterless Class‑D amplifier designed for automotive environments.
- OEM and aftermarket car‑audio modules
- Multi‑channel speaker amplification (front/rear) and subwoofer amplification
- Rear‑seat/center‑channel entertainment systems
- Bluetooth car kits, telematics devices, and other automotive audio modules
Note: TAS5760MDCAR is a high‑efficiency, filterless Class‑D amplifier designed for automotive environments.
Package
TAS5760MDCAR comes in a 16‑pin VQFN (3×3 mm) package.
