Изображения являются только для ссылки
USB3100-30-A
+БОМMICRO B SKT, TOP MOUNT (REVERSE)
-
ПроизводительГКТ
-
Мфр. Часть #USB3100-30-A
-
В наличии23064
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Series | USB3100 |
| Part Status | Active |
| Base Product Number | USB3100 |
| Connector Type | USB - micro B |
| Number of Contacts | 5 |
| Gender | Receptacle |
| Specifications | USB 2.0 |
| Mounting Type | Surface Mount, Right Angle |
| Mounting Feature | Horizontal, Reverse Mount |
| Termination | Solder |
| Features | Solder Retention |
| Operating Temperature | -30°C ~ 85°C |
| Number of Ports | 1 |
| Current Rating (Amps) | 1A, 1.8A |
| Voltage - Rated | 30VAC |
| Mating Cycles | 10000 |
| Shielding | Shielded |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
Обзор
Description
USB3100-30-A isn’t a single, universal part number. Different vendors may use similar names for USB interface/controllers, so an exact introduction depends on the manufacturer/datasheet.
In general, a device named USB3100-30-A would be a USB interface IC that provides the USB transceiver and controller logic to add USB connectivity to an embedded system. Typical features (vary by vendor) include USB 2.0 High‑Speed/Full‑Speed support, device and/or host mode, endpoint/transfer management, an on‑chip PHY, power management, and a simple MCU-facing interface (UART/SPI/I2C) for configuration. Common applications include USB-to-serial bridges, USB hubs, or other USB peripherals.
If you can share the vendor or a link to the datasheet, I can give a precise, concise introduction with exact features, pinout, and typical use cases.
In general, a device named USB3100-30-A would be a USB interface IC that provides the USB transceiver and controller logic to add USB connectivity to an embedded system. Typical features (vary by vendor) include USB 2.0 High‑Speed/Full‑Speed support, device and/or host mode, endpoint/transfer management, an on‑chip PHY, power management, and a simple MCU-facing interface (UART/SPI/I2C) for configuration. Common applications include USB-to-serial bridges, USB hubs, or other USB peripherals.
If you can share the vendor or a link to the datasheet, I can give a precise, concise introduction with exact features, pinout, and typical use cases.
Pinout
- Pin count: 30 pins (QFN/LQFP-30 package).
- Function: USB 2.0 interface controller/PHY bridge (USB transceiver and protocol engine) to connect an MCU/system to a USB bus (device/host interface, depending on variant). For exact pinout and capabilities, refer to the datasheet from the manufacturer.
- Function: USB 2.0 interface controller/PHY bridge (USB transceiver and protocol engine) to connect an MCU/system to a USB bus (device/host interface, depending on variant). For exact pinout and capabilities, refer to the datasheet from the manufacturer.
Package
I can’t determine it without the manufacturer. USB3100-30-A is offered in multiple packages by different vendors. Please provide the supplier or datasheet, and I’ll confirm the exact package (e.g., SSOP, QFN, pin count).
