ADM242AR
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6746 ПКС
- Package
- SOIC-18
- Series
- Интерфейс - драйверы, приемники, передатчики
Это подробное сравнение ADM242AR и ADM241LJRS предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADM242AR and ADM241LJRS are both dual-channel RS-232 transceivers from Analog Devices with matching driver/receiver counts and supply voltage requirements, making the ADM241LJRS a viable functional substitute for the ADM242AR in most applications. However, the differing package footprints and on-chip charge pump configurations require layout verification before committing to a drop-in replacement.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM242AR | ADM241LJRS | Why it matters |
|---|---|---|---|
| Number of Drivers/Receivers | 2/2 | 4/0 | Defines the interface direction and channel count; a 2/2 transceiver is bidirectional while a 4/0 device is a quad driver only, so they are not functionally interchangeable. |
| Data Rate | 200 kbps | 120 kbps | Maximum supported signaling speed; the lower-rate part may not meet timing requirements of a system designed around the faster device. |
| Supply Voltage | 5 V | 5 V | Both operate from a single 5 V rail, so power-supply compatibility is maintained between the two parts. |
| Number of Charge Pump Capacitors | 4 | 4 | External capacitor count affects board layout and BOM; matching counts simplifies a drop-in evaluation. |
| Operating Temperature Range | -40 °C to +85 °C | 0 °C to +70 °C | The wider industrial range of the ADM242AR allows use in harsher environments where the commercial-grade ADM241LJRS may not be rated. |
| Package / Mounting | 20-lead SOIC (surface mount) | 28-lead SSOP (surface mount) | Different footprints and pin counts mean the parts are not physically interchangeable on the same PCB without redesign. |
| Receiver Input Impedance | 5 kΩ | Not applicable (no receivers) | RS-232 receiver input impedance affects bus loading; the ADM241LJRS has no receivers, so this parameter is irrelevant for that device. |
| ESD Protection (Human Body Model) | ±15 kV | ±15 kV | Both offer the same robust ESD protection on the RS-232 I/O pins, an important reliability metric for interface parts. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM242AR | ADM241LJRS |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS232 | RS232 |
| Number of Drivers/Receivers | 2/2 | 4/5 |
| Duplex | Full | Full |
| Receiver Hysteresis | 400 mV | 650 mV |
| Data Rate | 200kbps | 120Kbps |
| Voltage - Supply | 4.5V ~ 5.5V | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM242AR is a dual-channel RS-232 line driver/receiver in a 16-lead SOIC package, specified for operation from a single 5 V supply. The ADM241LJRS is a lower-power variant in a 28-lead SSOP package that includes an on-board charge pump and shutdown capability. The ADM241LJRS is specified for 3.3 V or 5 V operation with reduced supply current, while the ADM242AR is a 5 V-only device. Package, pin count, and power consumption differ, so they are not drop-in replacements.
No. The ADM242AR uses a 16-lead SOIC package, while the ADM241LJRS uses a 28-lead SSOP package. The pin counts and pin functions differ, so the two devices cannot be interchanged on the same PCB footprint without a layout change.
The ADM242AR operates from a single 5 V supply. The ADM241LJRS is specified for operation from a 3.3 V or 5 V supply, making it suitable for mixed-voltage systems. Designs migrating between the two must verify that the supply rail and decoupling meet the target device's datasheet requirements.
The ADM241LJRS is designed as a low-power RS-232 transceiver with reduced supply current compared with the ADM242AR. The ADM241LJRS also provides a shutdown mode that further reduces supply current when the interface is inactive. Exact quiescent and shutdown currents should be taken from the respective manufacturer datasheets for the specific grade.
Yes. Both the ADM242AR and ADM241LJRS integrate charge pump circuitry to generate the positive and negative RS-232 voltage levels from a single positive supply, eliminating the need for separate ±12 V rails. The external capacitor requirements differ between the two devices and must follow each datasheet.
Both are dual-channel RS-232 driver/receiver devices intended for serial communication interfaces. The ADM242AR provides two drivers and two receivers. The ADM241LJRS also provides two drivers and two receivers with an integrated charge pump. Maximum data rate depends on the specific grade and load capacitance; consult the manufacturer datasheet for the guaranteed rate.
The ADM241LJRS is the appropriate choice for a 3.3 V-only system because it is specified for 3.3 V operation. The ADM242AR is a 5 V device and is not specified for 3.3 V supply operation, so it should not be used in a 3.3 V-only design without verifying compliance against its datasheet.
Verify package footprint and pinout, supply voltage range, charge pump capacitor values, shutdown and enable pin behavior, supply current budget, and guaranteed data rate against the manufacturer datasheets. Because the packages and pin counts differ, a direct PCB substitution is not possible; a layout revision and revalidation of the RS-232 interface are required.