ADM242AR
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6746 ПКС
- Package
- SOIC-18
- Series
- Интерфейс - драйверы, приемники, передатчики
Это подробное сравнение ADM242AR и ADM241LJRSZ предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADM241LJRSZ is a functionally compatible candidate for the ADM242AR, sharing the same dual RS-232 driver/receiver architecture, supply voltage range, and SOIC-16 footprint. Designers should validate the lower data rate (120 kbps vs 200 kbps), the reduced external capacitor count, and the narrower operating temperature range before committing to a drop-in substitution in existing designs.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM242AR | ADM241LJRSZ | Why it matters |
|---|---|---|---|
| Number of Drivers/Receivers | 2/2 | 4/0 | Determines the signal direction and channel count; a 2/2 transceiver cannot directly replace a 4/0 driver configuration in a given interface. |
| Data Rate | 200 kbps | 120 kbps | Maximum supported signaling speed; the lower-rated device may not meet timing requirements of a system designed for the faster part. |
| Supply Voltage | 5 V | 5 V | Both operate from a single 5 V rail, so power-supply compatibility is maintained between the two parts. |
| Operating Temperature Range | -40 °C to +85 °C | 0 °C to +70 °C | The wider industrial range of the ADM242AR allows use in harsher environments where the commercial-grade ADM241LJRSZ may not be rated. |
| Package / Mounting | 16-SOIC (surface mount) | 28-SOIC Wide (surface mount) | Different package footprints and pin counts prevent direct board-level drop-in replacement without layout changes. |
| Integrated Charge Pump | Yes | Yes | On-chip charge pumps generate the required RS-232 voltage levels from a single 5 V supply, simplifying the power design for both parts. |
| Receiver Input Voltage Range | ±30 V | ±30 V | Wide receiver input tolerance provides robust protection against RS-232 line faults and is matched between the two devices. |
| Number of Pins | 16 | 28 | Pin count affects PCB footprint and routing; the mismatch means the parts are not mechanically interchangeable. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM242AR | ADM241LJRSZ |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Analog Devices Inc. |
| Part Status | Obsolete | Active |
| Type | Transceiver | Transceiver |
| Protocol | RS232 | RS232 |
| Number of Drivers/Receivers | 2/2 | 4/5 |
| Duplex | Full | Full |
| Receiver Hysteresis | 400 mV | 650 mV |
| Data Rate | 200kbps | 120Kbps |
| Voltage - Supply | 4.5V ~ 5.5V | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM242AR is a dual-channel RS-232 line driver/receiver in a 16-lead SOIC package, specified for operation from a single 5 V supply. The ADM241LJRSZ is a lower-power variant in a 28-lead SSOP package that includes an on-board charge pump and shutdown/enable control, and is specified over the commercial temperature range. The two differ in package, pinout, power consumption, and control features, so they are not pin-for-pin interchangeable.
No. The ADM242AR uses a 16-lead SOIC (narrow body) package, while the ADM241LJRSZ uses a 28-lead SSOP package. The pin counts and pin functions differ, so the PCB land patterns and pin assignments are not compatible.
Both the ADM242AR and ADM241LJRSZ are specified for operation from a single +5 V supply. The on-chip charge pump in each device generates the positive and negative RS-232 voltage levels required for the transmitters.
The ADM242AR provides two RS-232 drivers and two RS-232 receivers. The ADM241LJRSZ also provides two drivers and two receivers, but adds shutdown and enable control functions that allow the transmitters and receivers to be disabled to reduce power consumption.
Yes. The ADM241LJRSZ includes active-low shutdown (SHDN) and enable control, allowing the driver and receiver sections to be powered down when not in use. The ADM242AR does not provide a shutdown control pin.
Both the ADM242AR and ADM241LJRSZ are specified for data rates up to 120 kbps, which is sufficient for standard RS-232 communication. Higher data rates require devices from the manufacturer's higher-speed families.
No. Because the packages, pinouts, and control features differ, the ADM242AR cannot be used as a drop-in replacement for the ADM241LJRSZ. Any substitution requires a PCB redesign and verification against the manufacturer's datasheets for both parts.
The ADM242AR is specified over the industrial temperature range of -40 °C to +85 °C. The ADM241LJRSZ is specified over the commercial temperature range of 0 °C to +70 °C. Designs requiring extended temperature operation should account for this difference.