ADM485EARZ
Компания Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 3013 ПКС
- Package
- SOIC-8
- Series
- Интерфейс - драйверы, приемники, передатчики
Это подробное сравнение ADM485EARZ и ADM4852AR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADM485EARZ and ADM4852AR are both half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package with a 5 V supply and a pinout that supports functional substitution in most designs. The ADM4852AR offers a higher maximum data rate and a wider operating temperature range, while the ADM485EARZ provides enhanced ESD protection. Designers should confirm data-rate headroom, ESD robustness requirements, and thermal margins before adopting the ADM4852AR as a direct replacement.
Компания Analog Devices Inc.
Компания Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM485EARZ | ADM4852AR | Why it matters |
|---|---|---|---|
| Data Rate | 2.5 Mbps | 2.5 Mbps | Maximum signaling speed; both support the same rate, so timing compatibility is equivalent. |
| Duplex Mode | Half-duplex | Half-duplex | Determines whether transmit and receive share the same bus pair; both are half-duplex, so bus topology is interchangeable. |
| Number of Drivers/Receivers | 1 driver / 1 receiver | 1 driver / 1 receiver | Defines the transceiver channel count; identical configuration allows direct functional substitution. |
| Supply Voltage | 5 V | 5 V | Operating supply must match the system rail; both are 5 V devices, so power design is compatible. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Higher ESD ratings improve robustness in harsh environments; equivalent ratings mean similar field reliability. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Determines environmental suitability; matching ranges allow use in the same industrial conditions. |
| Package / Mounting | 8-SOIC (surface mount) | 8-SOIC (surface mount) | Footprint and assembly method must match the PCB; identical packages permit drop-in replacement. |
| Fail-Safe Receiver | Yes (open/short circuit) | Yes (open/short circuit) | Fail-safe biasing ensures a defined logic state on idle or faulted buses; both provide it, so behavior is consistent. |
| Driver Output / Receiver Input Common-Mode Range | -7 V to +12 V | -7 V to +12 V | Wider common-mode range improves noise immunity on long buses; identical ranges give equivalent noise tolerance. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM485EARZ | ADM4852AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | Half | - |
| Receiver Hysteresis | 70 mV | - |
| Data Rate | 2.5Mbps | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADM485EARZ is a 5 V, low-power, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with enhanced ESD protection (±15 kV IEC 61000-4-2 on the bus pins). The ADM4852AR is a 3.3 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with ±15 kV ESD protection on the bus pins. The primary differences are supply voltage (5 V vs. 3.3 V) and the associated logic-level and driver/receiver specifications.
Both devices are offered in an 8-lead SOIC package with the same pinout (RO, RE, DE, DI, GND, A, B, VCC). However, pin compatibility alone does not guarantee interchangeability because the supply voltage and electrical specifications differ.
No, not without design validation. The ADM485EARZ operates from a 5 V supply, while the ADM4852AR operates from a 3.3 V supply. Logic input thresholds, driver output levels, and supply current specifications differ between the two, so a design targeting one supply voltage cannot directly substitute the other without verifying compatibility with the host logic and bus requirements.
The ADM485EARZ operates from a single 5 V supply. The ADM4852AR operates from a single 3.3 V supply. Each device's datasheet specifies the corresponding supply voltage range and current consumption.
Both the ADM485EARZ and ADM4852AR are specified for data rates up to 2.5 Mbps, according to their respective manufacturer datasheets.
Both the ADM485EARZ and ADM4852AR are specified with ±15 kV ESD protection (IEC 61000-4-2, air discharge) on the RS-485 bus pins (A and B), per their manufacturer datasheets.
Both the ADM485EARZ and ADM4852AR are specified as supporting up to 32 nodes on a single RS-485 bus, consistent with a 1/32 unit load receiver input impedance per their datasheets.
Both devices are specified for the industrial temperature range of −40 °C to +85 °C, per their manufacturer datasheets.