ADM485EARZ vs ADM4856AR

Это подробное сравнение ADM485EARZ и ADM4856AR предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM485EARZ and ADM4856AR are both half-duplex RS-485/RS-422 transceivers in 8-lead SOIC packages with comparable supply voltage and data-rate classes, making them a viable functional replacement candidate. However, the ADM4856AR offers a wider operating temperature range and lower quiescent supply current, while the ADM485EARZ provides enhanced ESD protection. Designers should validate bus loading, ESD robustness, and thermal margin against the target application before final qualification.

Interface Standard High match
Package Type High match
Operating Temperature Range Validation required
ESD Protection Level Validation required

Parts at a glance

Part A

ADM485EARZ

Компания Analog Devices Inc.

Lifecycle
Active
Stock
3013 ПКС
Package
SOIC-8
Series
Интерфейс - драйверы, приемники, передатчики
Part B

ADM4856AR

Компания Analog Devices Inc.

Lifecycle
Active
Stock
966 ПКС
Package
SOIC-8
Series
Интерфейс - драйверы, приемники, передатчики

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM485EARZ ADM4856AR Why it matters
Data Rate 2.5 Mbps 20 Mbps Maximum signaling speed; a faster part can replace a slower one in most designs, but not vice versa if the bus runs above 2.5 Mbps.
Duplex Mode Half-duplex Full-duplex Determines whether the transceiver can transmit and receive simultaneously; full-duplex parts require separate A/B and Y/Z pairs and are not pin-compatible with half-duplex layouts.
Number of Drivers / Receivers 1 / 1 1 / 1 Defines the channel count per package; matching counts is required for direct functional substitution.
Supply Voltage 5 V 5 V The operating rail must match the system supply; both are 5 V RS-485 transceivers, so supply compatibility is maintained.
Package / Mounting 8-SOIC (surface mount) 8-SOIC (surface mount) Footprint and assembly process must match for a drop-in replacement on an existing PCB.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Industrial temperature range ensures reliable operation in harsh environments; matching ranges preserve application suitability.
ESD Protection (Bus Pins) ±15 kV (HBM) ±15 kV (HBM) Bus-pin ESD robustness affects field reliability; equivalent ratings mean no degradation in surge immunity.
Fail-Safe Receiver Yes (open/short circuit) Yes (open/short circuit) Fail-safe biasing guarantees a defined logic level when the bus is idle or floating, preventing spurious data; both provide this feature.
Pin Count 8 8 Pin count must match for physical compatibility; however, pin functions differ between half- and full-duplex variants.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM485EARZ ADM4856AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Half -
Receiver Hysteresis 70 mV -
Data Rate 2.5Mbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the key differences between the ADM485EARZ and ADM4856AR?

The ADM485EARZ is a 5 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with enhanced ESD protection (±15 kV IEC 61000-4-2 on the bus pins). The ADM4856AR is a 3.3 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package. The primary differences are supply voltage (5 V vs 3.3 V), ESD rating, and the associated logic-level and bus-drive characteristics defined in their respective datasheets.

Are the ADM485EARZ and ADM4856AR pin-compatible?

Both devices are offered in an 8-lead SOIC package with the standard RS-485 transceiver pinout (RO, RE, DE, DI, GND, A, B, VCC). Pin functions and package footprint are the same, but the supply voltage difference (5 V vs 3.3 V) means they are not electrically interchangeable without verifying the logic interface and bus levels in the target design.

Can the ADM485EARZ and ADM4856AR be used interchangeably in an existing design?

No, not without design validation. The ADM485EARZ operates from a 5 V supply, while the ADM4856AR operates from a 3.3 V supply. Substitution requires confirming that the host logic levels, bus driver output levels, and power supply of the target design match the selected device's datasheet specifications.

What supply voltage does each device require?

The ADM485EARZ operates from a single 5 V ±5% supply. The ADM4856AR operates from a single 3.3 V supply. Refer to the respective manufacturer datasheets for the exact specified supply voltage ranges and tolerances.

What ESD protection do these transceivers provide on the bus pins?

The ADM485EARZ features enhanced ESD protection on the RS-485 bus pins, rated to ±15 kV using the IEC 61000-4-2 contact discharge method, per the Analog Devices datasheet. The ADM4856AR ESD rating should be confirmed from its own datasheet, as it differs from the ADM485EARZ.

What data rate do the ADM485EARZ and ADM4856AR support?

Both devices are specified for RS-485/RS-422 data rates in the range defined by their datasheets. The ADM485EARZ is specified for data rates up to 2.5 Mbps. The ADM4856AR data rate should be verified from its datasheet, as the two parts are not specified identically.

What are the operating temperature ranges for these devices?

The ADM485EARZ is specified over the industrial temperature range of −40°C to +85°C. The ADM4856AR operating temperature range should be confirmed from its datasheet, as it may differ from the ADM485EARZ specification.

Which device should be selected for a 3.3 V logic system?

The ADM4856AR is the appropriate choice for a 3.3 V logic system, since it is specified to operate from a 3.3 V supply. The ADM485EARZ requires a 5 V supply and is intended for 5 V systems. Selection should be confirmed against the host logic levels and bus requirements in the target design.