ADS1210U vs ADS1201UG4

Это подробное сравнение ADS1210U и ADS1201UG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1210U and ADS1201UG4 are both 24-bit delta-sigma analog-to-digital converters, but they differ fundamentally in resolution architecture, output interface, package footprint, and reference configuration, so the ADS1201UG4 cannot serve as a direct drop-in substitute for the ADS1210U without circuit redesign and validation.

Different output interface Different package footprint Different reference configuration Different input architecture

Parts at a glance

Part A

ADS1210U

Техасские инструменты

Lifecycle
Active
Stock
5384 ПКС
Package
SOIC-8
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)
Part B

ADS1201UG4

Техасские инструменты

Lifecycle
Active
Stock
6830 ПКС
Package
SOIC-16
Series
Сбор данных - ADC-DAC - Специальное назначение

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1210U ADS1201UG4 Why it matters
Resolution (bits) 24 24 Both are 24-bit delta-sigma ADCs, so resolution alone does not distinguish them for substitutability.
Architecture Delta-Sigma Delta-Sigma Matching architecture indicates similar noise-shaping behavior and signal-chain design requirements.
Number of Input Channels 1 differential 1 differential Channel count and configuration must match the sensor or signal source topology in the target design.
Sampling Rate (max) 10 kSPS 1.5 kSPS Maximum output data rate determines whether the part can meet the required update rate for the application.
Interface Type SPI / Serial SPI / Serial A matching digital interface allows drop-in compatibility with the host microcontroller or DSP.
Supply Voltage (analog) 5 V 5 V Analog supply compatibility ensures the part can share the existing power rail without level shifting.
Package / Mounting SOIC-18 (SMD) SOIC-16 (SMD) Different package pin counts and footprints require PCB layout changes, affecting direct substitutability.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Matching temperature ratings confirm both parts suit the same environmental conditions.
Input Type Differential Differential Differential inputs improve common-mode rejection; matching this preserves noise performance in the design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1210U ADS1201UG4
Supplier - Texas Instruments
Part Status Last Time Buy Discontinued at Digi-Key
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 24 b
Sampling Rate(Per Second) 16k 1k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential -
Configuration PGA-ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External, Internal -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 5V -
Features PGA -

Frequently asked questions

What are the primary differences between the ADS1210U and the ADS1201UG4?

The ADS1210U is a 24-bit, 19kHz delta-sigma analog-to-digital converter with a programmable gain amplifier, while the ADS1201UG4 is a 24-bit, 1.5kHz delta-sigma modulator designed for isolated measurement applications. The ADS1210U integrates a full ADC signal chain with digital filter and SPI interface, whereas the ADS1201UG4 provides a single-bit modulator output stream requiring external digital filtering.

Do the ADS1210U and ADS1201UG4 have compatible package footprints?

No. The ADS1210U is supplied in a 24-pin SOIC (wide-body) package, while the ADS1201UG4 is supplied in a 16-pin SOIC package. The pin counts and pin functions differ, so they are not footprint-compatible and cannot be interchanged on the same PCB land pattern.

What are the maximum output data rates of the ADS1210U and ADS1201UG4?

The ADS1210U supports programmable output data rates up to 19kHz in its fastest mode. The ADS1201UG4 modulator operates with a clock input up to 10MHz and produces a 1-bit output stream; its effective conversion rate depends on the external digital filter and decimation ratio selected by the system designer.

Which device is better suited for isolated industrial measurement systems?

The ADS1201UG4 is specifically intended for isolated measurement applications because its modulator output can be coupled through a digital isolator, keeping the analog front end galvanically isolated from the controller. The ADS1210U integrates the digital filter and serial interface on-chip, making it better suited for non-isolated precision measurement systems where a complete ADC-to-SPI solution is desired.

Do both devices support a programmable gain amplifier (PGA)?

No. The ADS1210U includes an on-chip programmable gain amplifier with selectable gains, allowing direct connection of low-level sensors. The ADS1201UG4 does not include an integrated PGA; any signal conditioning or gain must be provided by external circuitry ahead of the modulator input.

What digital interface does each device provide?

The ADS1210U provides a serial peripheral interface (SPI-compatible) with a digital filter and decimation on-chip, outputting fully converted digital codes. The ADS1201UG4 outputs a single-bit oversampled modulator data stream that must be processed by an external digital filter or FPGA/DSP to obtain a multi-bit conversion result.

Are the ADS1210U and ADS1201UG4 drop-in replacements for each other?

No. They differ in package, pin count, interface architecture, integrated signal-chain features, and intended application (complete ADC versus isolated modulator). A direct substitution is not possible; any design change requires validation against the respective manufacturer datasheets and the target system requirements.