ADS1210U
Техасские инструменты
- Lifecycle
- Active
- Stock
- 5384 ПКС
- Package
- SOIC-8
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS1210U и ADS1211UG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS1211UG4 is a functionally compatible replacement candidate for the ADS1210U, sharing the same 24-bit delta-sigma ADC core, SPI-compatible serial interface, and SOIC-24 footprint. The primary distinction is the ADS1211UG4's integrated 4-channel input multiplexer versus the single-channel input of the ADS1210U, which broadens application flexibility but requires validation of the input configuration and channel-selection logic in the target design.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1211UG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so resolution is identical and not a differentiator for substitutability. |
| Number of input channels | 1 (single-ended) | 4 (differential/multiplexed) | The ADS1211 provides a 4-channel input multiplexer while the ADS1210 is single-channel; this is the primary functional difference affecting system architecture. |
| Interface type | SPI-compatible serial (3-wire) | SPI-compatible serial (3-wire) | Both use the same serial interface, so firmware and host connectivity are compatible. |
| Supply voltage (analog) | 5 V | 5 V | Identical analog supply requirements allow the same power rail design. |
| Package | 18-pin SOIC (D) | 24-pin SOIC (DW) | Different package pin counts and footprints mean the boards are not drop-in interchangeable without layout changes. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | Same industrial temperature range, so environmental suitability is equivalent. |
| Data output rate (max) | Up to ~15.6 kSPS (programmable) | Up to ~15.6 kSPS (programmable) | Identical programmable output rates support the same sampling throughput requirements. |
| Internal PGA gain range | 1 to 128 (programmable) | 1 to 128 (programmable) | Same programmable gain amplifier range enables comparable low-level signal conditioning. |
| Reference input | External differential reference | External differential reference | Both require an external reference, so reference design and accuracy budgeting are unchanged. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1211UG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Last Time Buy | Discontinued at Digi-Key |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 16k | 16k |
| Number of Inputs | 1 | 4 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | MUX-PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Features | PGA | PGA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1210U is a single-channel 24-bit delta-sigma ADC in a 24-pin SOIC package, while the ADS1211UG4 is a four-channel (differential input) 24-bit delta-sigma ADC in a 28-pin SOIC package. The ADS1211UG4 provides additional input channels and a larger package, while both share the same core 24-bit architecture, programmable gain amplifier, and serial interface family from Texas Instruments.
No. The ADS1210U uses a 24-pin SOIC (DW) package, and the ADS1211UG4 uses a 28-pin SOIC (DW) package. The different pin counts and pinouts mean they are not drop-in replacements and require different PCB footprints.
Both are 24-bit delta-sigma ADCs from the same ADS121x family and support programmable output data rates and gain settings. However, exact achievable effective resolution and data rate combinations depend on the specific configuration and should be confirmed against the respective Texas Instruments datasheets for each part number.
The ADS1210U provides a single differential input channel. The ADS1211UG4 provides four input channels, allowing multiplexed measurement of multiple signal sources without external multiplexing circuitry.
Not directly. Because the ADS1211UG4 has a different package size, pin count, and channel configuration, substituting it for the ADS1210U requires a PCB redesign and firmware review. The replacement should only be made after validating all electrical and timing differences against the official Texas Instruments datasheets.
Both parts are offered in SOIC packages. The ADS1210U is in a 24-pin SOIC, and the ADS1211UG4 is in a 28-pin SOIC. The "G4" suffix on the ADS1211UG4 denotes a lead-free (RoHS-compliant) package variant per Texas Instruments ordering conventions.
Both devices belong to the ADS121x family and use a serial interface for configuration and data readout. Designers should verify the exact interface timing, register map, and command set in the respective datasheets, since channel count differences affect the configuration registers.