ADS7843E/2K5 vs ADS7841EG4

Это подробное сравнение ADS7843E/2K5 и ADS7841EG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E/2K5 and ADS7841EG4 are not drop-in replacements for one another. Although both are 12-bit touch-screen controller ADCs from Texas Instruments in a 16-pin SSOP package, they differ in resolution architecture, interface protocol, channel configuration, and supply voltage range, so the ADS7841EG4 cannot be substituted directly for the ADS7843E/2K5 without circuit and firmware redesign.

Different interface protocol Different channel configuration Different supply voltage range Different conversion architecture

Parts at a glance

Part A

ADS7843E/2K5

Техасские инструменты

Lifecycle
Active
Stock
2859 ПКС
Package
SSOP-16
Series
Сбор данных - контроллеры сенсорного экрана
Part B

ADS7841EG4

Техасские инструменты

Lifecycle
Active
Stock
8773 ПКС
Package
SSOP-16
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E/2K5 ADS7841EG4 Why it matters
Resolution (bits) 12 12 Both are 12-bit SAR ADCs, so conversion resolution is equivalent for touch or signal digitization.
Number of input channels 4 (single-ended/differential touch configuration) 4 (single-ended) Channel configuration affects whether the device can directly interface with a 4-wire resistive touchscreen versus general single-ended analog inputs.
Interface type SPI-compatible serial (12-bit) SPI-compatible serial Serial interface compatibility determines ease of connection to microcontrollers and system bus architecture.
Supply voltage range 2.7 V to 5.25 V 2.7 V to 5.25 V Matching supply ranges allow either part to operate in the same low-voltage or 5 V system rails.
Internal reference Yes (internal 2.5 V reference) Yes (internal 2.5 V reference) An internal reference simplifies design by removing the need for an external precision voltage reference.
Package type TSSOP-16 TSSOP-16 Identical package and pin count support drop-in PCB compatibility between the two parts.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings ensure both parts suit the same industrial and commercial environments.
Typical application focus Resistive touchscreen controller General-purpose 12-bit ADC The ADS7843 is optimized for touchscreen digitizing (with pen-interrupt and touch detection), while the ADS7841 is a general-purpose ADC, affecting functional substitutability.
Throughput / conversion rate Up to 125 kSPS Up to 200 kSPS Higher throughput in the ADS7841 allows faster sampling, which may matter for higher-speed signal acquisition needs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E/2K5 ADS7841EG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Touchscreen 4 Wire Resistive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 2.5 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the ADS7843E/2K5 and the ADS7841EG4?

The ADS7843E/2K5 is a 4-wire resistive touch screen controller with an integrated 12-bit ADC, while the ADS7841EG4 is a standalone 12-bit, 4-channel successive-approximation ADC. The ADS7843E/2K5 includes on-chip touch screen drivers and a pen-interrupt output, whereas the ADS7841EG4 provides a general-purpose 4-channel analog input multiplexer without touch screen control logic.

Are the ADS7843E/2K5 and ADS7841EG4 pin-compatible?

No. The ADS7843E/2K5 is supplied in a 16-pin SSOP package, and the ADS7841EG4 is supplied in a 16-pin SOIC (wide-body) package. The package types and pin functions differ, so they are not drop-in replacements for each other.

Do both devices use the same serial interface?

Both devices use a serial interface, but the protocols differ. The ADS7843E/2K5 uses a 3-wire SPI-compatible interface with a dedicated BUSY output and pen-interrupt signal. The ADS7841EG4 uses a standard 4-wire SPI-compatible interface (CS, DIN, DOUT, DCLK) without touch screen control signals.

What are the resolution and sampling specifications of each device?

Both devices provide 12-bit resolution. The ADS7843E/2K5 supports a throughput rate up to 125 kSPS. The ADS7841EG4 supports a throughput rate up to 200 kSPS. These figures should be confirmed against the respective manufacturer datasheets for the exact grade and test conditions.

Can the ADS7841EG4 be used as a direct substitute for the ADS7843E/2K5 in a touch screen design?

No. The ADS7841EG4 lacks the integrated touch screen drivers, pen-interrupt output, and touch-specific control logic present in the ADS7843E/2K5. A touch screen design requiring those features cannot use the ADS7841EG4 as a direct substitute without additional external circuitry and firmware changes.

What are the supply voltage requirements for these two devices?

The ADS7843E/2K5 operates from a single supply of 2.7 V to 5.25 V. The ADS7841EG4 operates from a single supply of 2.7 V to 5.25 V. Both devices support low-voltage operation, but the analog input range and reference configuration should be verified per datasheet for each part.

Which device is better suited for general-purpose analog signal acquisition?

The ADS7841EG4 is better suited for general-purpose 4-channel analog signal acquisition because it provides a standard 4-channel input multiplexer and a 200 kSPS throughput rate without touch screen-specific overhead. The ADS7843E/2K5 is optimized specifically for 4-wire resistive touch screen digitizing applications.