ADS7843E/2K5 vs ADS7841ESG4

Это подробное сравнение ADS7843E/2K5 и ADS7841ESG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E/2K5 and ADS7841ESG4 are not drop-in replacements for one another. Although both are 12-bit SAR ADCs from Texas Instruments in similar SOIC packages, they differ in resolution-critical interface architecture, channel configuration, and control interface, so substituting one for the other requires design validation rather than direct replacement.

Different interface type Different channel configuration Different control interface Different conversion architecture

Parts at a glance

Part A

ADS7843E/2K5

Техасские инструменты

Lifecycle
Active
Stock
2859 ПКС
Package
SSOP-16
Series
Сбор данных - контроллеры сенсорного экрана
Part B

ADS7841ESG4

Техасские инструменты

Lifecycle
Active
Stock
5879 ПКС
Package
SSOP-16
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E/2K5 ADS7841ESG4 Why it matters
Resolution (bits) 12 12 Both are 12-bit ADCs, so resolution is equivalent for substitutability.
Number of input channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be digitized; both support the same input configuration.
Interface type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing direct drop-in compatibility in most digital host systems.
Supply voltage (V) 2.7 to 5.25 2.7 to 5.25 Operating voltage range must match the system supply; both support the same wide range.
Package / mounting 16-SSOP (surface mount) 16-SSOP (surface mount) Package and footprint compatibility is essential for physical board-level substitution.
Operating temperature range (°C) -40 to +85 -40 to +85 Temperature range affects suitability for industrial and automotive environments; both are rated identically.
Sampling rate (kSPS) 125 200 Maximum throughput differs; the ADS7841ESG4 can sample faster, which may matter for higher-speed signal acquisition.
Power consumption (typical) Low power (touch-screen optimized) Low power (general-purpose ADC) Power draw affects battery life and thermal design; both are low-power but optimized for different use cases.
Primary application focus Touch-screen controller ADC General-purpose 12-bit ADC The intended application differs; the ADS7843E/2K5 is tailored for touch panels while the ADS7841ESG4 is a general-purpose converter, affecting substitutability.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E/2K5 ADS7841ESG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Touchscreen 4 Wire Resistive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 2.5 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the key functional differences between the ADS7843E/2K5 and the ADS7841ESG4?

The ADS7843E/2K5 is a 4-wire resistive touchscreen controller with a 12-bit SAR ADC and an on-chip switch driver for touchscreen panels, while the ADS7841ESG4 is a 4-channel, 12-bit SAR ADC without touchscreen control logic. The ADS7843E/2K5 is designed for touchscreen digitizer applications, whereas the ADS7841ESG4 is a general-purpose 4-channel ADC.

Do the ADS7843E/2K5 and ADS7841ESG4 have the same package and pinout?

No. The ADS7843E/2K5 is supplied in a 16-pin SSOP package, and the ADS7841ESG4 is supplied in a 16-pin QSOP package. Although both are 16-pin devices, the pin functions differ because the ADS7843E/2K5 includes touchscreen switch drivers and a pen-interrupt output, so the two devices are not pin-compatible.

Can the ADS7843E/2K5 be used as a drop-in replacement for the ADS7841ESG4?

No. The ADS7843E/2K5 and ADS7841ESG4 differ in package type, pin functions, and on-chip features. The ADS7843E/2K5 includes touchscreen control and pen-interrupt functions not present on the ADS7841ESG4, so a direct drop-in replacement is not supported without design changes and validation against the respective datasheets.

What are the resolution and sampling characteristics of these two devices?

Both the ADS7843E/2K5 and the ADS7841ESG4 are 12-bit successive-approximation register (SAR) ADCs. The ADS7843E/2K5 supports a throughput rate of up to 125 kSPS, and the ADS7841ESG4 also supports a throughput rate of up to 200 kSPS. Both devices operate from a single 2.7 V to 5 V supply.

What input channels are available on each device?

The ADS7843E/2K5 provides a 4-wire touchscreen interface with X and Y position measurement channels plus a battery monitor and auxiliary input, controlled through a serial interface. The ADS7841ESG4 provides four single-ended analog input channels (CH0 through CH3) that are selected via the serial interface, making it suitable for general-purpose multi-channel signal acquisition.

How do the serial interfaces of the ADS7843E/2K5 and ADS7841ESG4 compare?

Both devices use a serial interface compatible with SPI, QSPI, and Microwire protocols. The ADS7843E/2K5 uses a control byte to select the touchscreen measurement mode and channel, and it provides a pen-interrupt output. The ADS7841ESG4 uses a control byte to select one of its four input channels and does not include touchscreen-specific control signals.

Which device should be selected for a touchscreen digitizer design versus a general-purpose data acquisition design?

For a 4-wire resistive touchscreen digitizer design, the ADS7843E/2K5 is the appropriate choice because it integrates the touchscreen switch drivers and pen-interrupt logic required for panel control. For general-purpose multi-channel analog signal acquisition, the ADS7841ESG4 is appropriate because it provides four single-ended input channels without touchscreen-specific circuitry.