ADS7843E
Берр Браун
- Lifecycle
- Active
- Stock
- 6691 ПКС
- Package
- SSOP-16
- Series
- Сбор данных - контроллеры сенсорного экрана
Это подробное сравнение ADS7843E и ADS7841EG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS7843E and ADS7841EG4 are not drop-in replacements for one another. Although both are 12-bit successive-approximation ADCs in a 16-pin SSOP package, they differ in resolution of control interface, channel configuration, and conversion architecture, so the ADS7841EG4 cannot be substituted directly for the ADS7843E without circuit and firmware redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841EG4 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both are 12-bit ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing similar host microcontroller connections. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Compatible supply ranges allow operation in the same system power domains. |
| Sampling Rate | 125 kSPS | 200 kSPS | Higher sampling rate supports faster signal acquisition; a difference may affect timing-critical designs. |
| Internal Reference | No (external reference required) | No (external reference required) | Both require an external reference, so reference circuitry must be provided in either case. |
| Package / Mounting | 16-SSOP (surface mount) | 16-SSOP (surface mount) | Identical package and footprint enable direct board-level replacement. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Matching temperature ranges ensure equivalent environmental robustness. |
| Power Consumption | Low power (typ. ~0.5 mW at 2.7 V) | Low power (typ. ~0.9 mW at 5 V) | Power draw affects battery life and thermal budget in portable designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841EG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, housed in a 16-pin SSOP package. The ADS7841EG4 is a 4-channel, 12-bit SAR ADC with an SPI-compatible serial interface, housed in a 16-pin SSOP package (the "G4" suffix denotes lead-free/RoHS-compliant construction). The ADS7843E integrates touch screen drive and sense control logic, while the ADS7841EG4 is a general-purpose 4-channel ADC without touch screen control circuitry.
No. Although both devices are offered in a 16-pin SSOP package, their pin functions differ. The ADS7843E includes touch screen driver outputs (X+, X-, Y+, Y-) and a pen-interrupt output, whereas the ADS7841EG4 provides four analog input channels (CH0–CH3) with a different pin assignment. They are not direct pin-for-pin replacements.
No, not as a direct drop-in replacement. The ADS7843E contains dedicated touch screen control logic and drive outputs that the ADS7841EG4 does not provide. Substitution would require redesign of the analog front end, the control firmware, and the PCB layout to accommodate the different pin functions and the absence of touch screen drive circuitry.
Both the ADS7843E and ADS7841EG4 use a 12-bit successive-approximation register (SAR) ADC architecture, providing 12-bit resolution over their respective analog input ranges.
Both devices use an SPI-compatible serial interface for communication with a host microcontroller or processor, supporting standard serial clock, data-in, data-out, and chip-select signals.
The ADS7843E is intended for 4-wire resistive touch screen digitizer applications such as handheld terminals, PDAs, and portable instruments. The ADS7841EG4 is a general-purpose 4-channel 12-bit ADC suited to industrial measurement, data acquisition, and multi-channel sensor monitoring where touch screen control is not required.
No. The "G4" suffix on the ADS7841EG4 denotes lead-free (RoHS-compliant) packaging and does not indicate a functional or parametric change relative to the base ADS7841. It does not make the device functionally equivalent to the ADS7843E, which remains a distinct touch screen controller product.